Toggling the new Dark Mode with latest firmware - Page 3

the_Pan · 10-24-2021, 03:53 PM

Hi everyone,

I just updated my forma and realized the the the difference how the invert screen is working now. Before I was also able to switch between the modes directly and instantly in the book, now -as you already wrote- I have to go over the main menu or the toc. I also updated nickelmenu to latest 0.5.2.
I there a way how get the old switching way back?

MGlitch · 10-24-2021, 04:06 PM

Quote:

Originally Posted by the_Pan

Hi everyone,

I just updated my forma and realized the the the difference how the invert screen is working now. Before I was also able to switch between the modes directly and instantly in the book, now -as you already wrote- I have to go over the main menu or the toc. I also updated nickelmenu to latest 0.5.2.
I there a way how get the old switching way back?

In order of relative ease and speed. Obviously 2 and 3 might switch places depending on ones financial situation. 4 is placed last because I’m presuming a cost to learn the language and time to do so, and then learning the ins and outs of Nickle.

1) revert to the older firmware

2) buy an Elipsa, Sage, or Libra 2

3) Wait for geek to have the time to figure out how to get the toggle in nickelmenu to trigger the change from within the book instantly

4) learn to code in whatever nickelmenu is in and figure it out for Geek.

the_Pan · 10-24-2021, 04:12 PM

Okay, so I'll choose 1 for a bit longer

Semwize · 10-24-2021, 04:28 PM

Quote:

Originally Posted by MGlitch

2) buy an Elipsa, Sage, or Libra 2

Does toggling Dark Mode (NickelMenu) in the reading menu work there? Perhaps it was mentioned somewhere and I missed it.

MGlitch · 10-24-2021, 04:44 PM

Quote:

Originally Posted by Semwize

Does toggling Dark Mode (NickelMenu) in the reading menu work there? Perhaps it was mentioned somewhere and I missed it.

Not with nick’s but those devices all allow you to toggle it in the reading settings natively

jsessions · 10-25-2021, 07:14 AM

Quote:

Originally Posted by Semwize

Does toggling Dark Mode (NickelMenu) in the reading menu work there? Perhaps it was mentioned somewhere and I missed it.

You can toggle Dark Mode in NickleMenu using geek1011's file linked in this post (also read the posts leading up to this):
https://www.mobileread.com/forums/sh...&postcount=555

It works for me on a Clara although you need to enable it on home page before starting to read or if enabled when reading you need to re-open book for screen to switch.

RobertJSawyer · 10-25-2021, 04:13 PM

I wrote the original post in this topic, but someone on Reddit asked for instructions and since I've learned more since I wrote that post, I created a new guide to implementing both Dark Mode and classic invert mode on older Kobo devices. Here it is:

It's easy to add to the Clara HD, at least, and I imagine to others, and even if Dark Mode doesn't work (which inverts text but not images, and only within books), you can still easily get the old invert mode (which inverts both text and images and all screens everywhere). Make sure you're on the latest firmware for your device (do a sync first), then the tool you need is the version of Nickel Menu you can get here (make sure you're using this version):

https://www.mobileread.com/forums/sh...&postcount=555

Once you've installed Nickel Menu, you'll find a new folder named \.adds\nm on your Kobo reader. Copy the file below as config-nickel-menu.txt to that folder, and disconnect your reader. It should reboot, and you'll find a new "Nickel Menu" menu icon on the various screens of your Kobo.

More about Nickel Menu is here:

https://www.mobileread.com/forums/sh...d.php?t=329525

Note: with the latest firmware, you can toggle dark mode, but on older devices, you have to close then reopen your book (or open the table of contents or the annotations listing from within the book) to make the Kobo recognize that you've switched modes, and to get the classic invert mode (text and images, and all screens, inverted), the Kobo needs to reboot itself for it to take effect (all your content will be fine); the Nickel Menu definitions I've provided do that automatically, although it takes several seconds to happen).

You can get my Nickel Menu file here:

https://sfwriter.com/config-nickel-menu.txt

Feel free to remove or comment out (by adding a "#" to the front of the line) items that are irrelevant to your usage. Not that the Nickel Menu file needs Unix/Mac style line endings (life-feed only), not DOS/Windows ones (carriage return followed by line-feed). If your file editor creates a *.BAK file, delete that when you're finished editing:

Code:

# DON'T FORGET TO ERASE *.BAK FILE
# -----------------------------------------------------------------------
menu_item :main    :Dark Mode       :nickel_setting :toggle :dark_mode
menu_item :main    :Invert & Reboot :nickel_setting :toggle: invert
    chain_success                   :power          :reboot
menu_item :main    :Portrait        :nickel_orientation :portrait
menu_item :main    :> Landscape     :nickel_orientation :landscape
menu_item :main    :< Landscape     :nickel_orientation :inverted_landscape
menu_item :main    :My Articles     :nickel_open: library: pocket
menu_item :main    :Screenshots     :nickel_setting :toggle :screenshots
# -----------------------------------------------------------------------
menu_item :reader  :Dark Mode       :nickel_setting :toggle :dark_mode
menu_item :reader  :Invert & Reboot :nickel_setting :toggle: invert
    chain_success                   :power          :reboot
menu_item :reader  :Portrait        :nickel_orientation :portrait
menu_item :reader  :> Landscape     :nickel_orientation :landscape
menu_item :reader  :< Landscape     :nickel_orientation :inverted_landscape
menu_item :reader  :My Articles     :nickel_open: library: pocket
# -----------------------------------------------------------------------
menu_item :library :Dark Mode       :nickel_setting :toggle :dark_mode
menu_item :library :Invert & Reboot :nickel_setting :toggle: invert
    chain_success                   :power          :reboot
menu_item :library :Portrait        :nickel_orientation :portrait
menu_item :library :> Landscape     :nickel_orientation :landscape
menu_item :library :< Landscape     :nickel_orientation :inverted_landscape
menu_item :library :My Articles     :nickel_open: library: pocket
# --------------------------------------------------------------------------

jeff47 · 01-08-2022, 06:31 PM

Thanks. I do get an error on my Libra H2O using the latest firmware - "unknown setting name "toggle" (arg: 'toggle: dark_mode') (src/action_cc.cc:356)

I assume that this is due to an older device? Dark mode is available in the devmode menu but not elsewhere. The "invert and reboot" function does work.

John F · 01-08-2022, 06:36 PM

Quote:

Originally Posted by jeff47

Thanks. I do get an error on my Libra H2O using the latest firmware - "unknown setting name "toggle" (arg: 'toggle: dark_mode') (src/action_cc.cc:356)

I assume that this is due to an older device? Dark mode is available in the devmode menu but not elsewhere. The "invert and reboot" function does work.

Search this forum section for "unknown setting".

Deobulakenyo · 01-08-2022, 10:11 PM

Quote:

Originally Posted by jeff47

Thanks. I do get an error on my Libra H2O using the latest firmware - "unknown setting name "toggle" (arg: 'toggle: dark_mode') (src/action_cc.cc:356)

I assume that this is due to an older device? Dark mode is available in the devmode menu but not elsewhere. The "invert and reboot" function does work.

Are you using nickelmenu to set this? If so, use the latest nickel menu version.

MGlitch · 01-09-2022, 01:15 AM

Just to add on, the version of nickelmenu you need is in post 555 of the NM thread

RobertJSawyer · 01-09-2022, 12:46 PM

Yes, folks, please read my instructions carefully. You must use this version of NickelMenu -- the exact one I linked to and said "Make sure you're using this version." AGAIN: USE ONLY THE VERSION IN THIS MESSAGE:

https://www.mobileread.com/forums/sh...&postcount=555

John F · 01-09-2022, 03:44 PM

Quote:

Originally Posted by RobertJSawyer

Yes, folks, please read my instructions carefully. You must use this version of NickelMenu -- the exact one I linked to and said "Make sure you're using this version." AGAIN: USE ONLY THE VERSION IN THIS MESSAGE:

https://www.mobileread.com/forums/sh...&postcount=555

Which version should I use?

RobertJSawyer · 01-09-2022, 03:45 PM

Quote:

Originally Posted by John F

Which version should I use?

For this, John, I give you an F.

JSWolf · 01-09-2022, 04:17 PM

Robert, one setting I suggest you put in your NickelMenu config is the force USB setting. It allows you to toggel USB without having to unplug and replug the USB cable for updating the database after adding more eBook(s).

Code:

menu_item : main : USB : nickel_misc : force_usb_connection

10-25-2021, 04:13 PM	#37
RobertJSawyer Guru Posts: 739 Karma: 4306712 Join Date: Jun 2006 Location: Toronto Device: Kobo Libra 2, Clara 2E, and Clara HD; Kindle PaperWhite	I wrote the original post in this topic, but someone on Reddit asked for instructions and since I've learned more since I wrote that post, I created a new guide to implementing both Dark Mode and classic invert mode on older Kobo devices. Here it is: It's easy to add to the Clara HD, at least, and I imagine to others, and even if Dark Mode doesn't work (which inverts text but not images, and only within books), you can still easily get the old invert mode (which inverts both text and images and all screens everywhere). Make sure you're on the latest firmware for your device (do a sync first), then the tool you need is the version of Nickel Menu you can get here (make sure you're using this version): https://www.mobileread.com/forums/sh...&postcount=555 Once you've installed Nickel Menu, you'll find a new folder named \.adds\nm on your Kobo reader. Copy the file below as config-nickel-menu.txt to that folder, and disconnect your reader. It should reboot, and you'll find a new "Nickel Menu" menu icon on the various screens of your Kobo. More about Nickel Menu is here: https://www.mobileread.com/forums/sh...d.php?t=329525 Note: with the latest firmware, you can toggle dark mode, but on older devices, you have to close then reopen your book (or open the table of contents or the annotations listing from within the book) to make the Kobo recognize that you've switched modes, and to get the classic invert mode (text and images, and all screens, inverted), the Kobo needs to reboot itself for it to take effect (all your content will be fine); the Nickel Menu definitions I've provided do that automatically, although it takes several seconds to happen). You can get my Nickel Menu file here: https://sfwriter.com/config-nickel-menu.txt Feel free to remove or comment out (by adding a "#" to the front of the line) items that are irrelevant to your usage. Not that the Nickel Menu file needs Unix/Mac style line endings (life-feed only), not DOS/Windows ones (carriage return followed by line-feed). If your file editor creates a .BAK file, delete that when you're finished editing: Code: # DON'T FORGET TO ERASE .BAK FILE # ----------------------------------------------------------------------- menu_item :main :Dark Mode :nickel_setting :toggle :dark_mode menu_item :main :Invert & Reboot :nickel_setting :toggle: invert chain_success :power :reboot menu_item :main :Portrait :nickel_orientation :portrait menu_item :main :> Landscape :nickel_orientation :landscape menu_item :main :< Landscape :nickel_orientation :inverted_landscape menu_item :main :My Articles :nickel_open: library: pocket menu_item :main :Screenshots :nickel_setting :toggle :screenshots # ----------------------------------------------------------------------- menu_item :reader :Dark Mode :nickel_setting :toggle :dark_mode menu_item :reader :Invert & Reboot :nickel_setting :toggle: invert chain_success :power :reboot menu_item :reader :Portrait :nickel_orientation :portrait menu_item :reader :> Landscape :nickel_orientation :landscape menu_item :reader :< Landscape :nickel_orientation :inverted_landscape menu_item :reader :My Articles :nickel_open: library: pocket # ----------------------------------------------------------------------- menu_item :library :Dark Mode :nickel_setting :toggle :dark_mode menu_item :library :Invert & Reboot :nickel_setting :toggle: invert chain_success :power :reboot menu_item :library :Portrait :nickel_orientation :portrait menu_item :library :> Landscape :nickel_orientation :landscape menu_item :library :< Landscape :nickel_orientation :inverted_landscape menu_item :library :My Articles :nickel_open: library: pocket # -------------------------------------------------------------------------- Last edited by RobertJSawyer; 01-09-2022 at 12:48 PM.

01-09-2022, 04:17 PM	#45
JSWolf Resident Curmudgeon Posts: 80,782 Karma: 150249619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Robert, one setting I suggest you put in your NickelMenu config is the force USB setting. It allows you to toggel USB without having to unplug and replug the USB cable for updating the database after adding more eBook(s). Code: menu_item : main : USB : nickel_misc : force_usb_connection

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bug: Dark Mode (Windows) Book Details Pop-Up Cover Background Not Changing to Dark	cgrapski	Calibre	7	05-04-2021 12:45 AM
What uses more juice, default mode or dark mode?	Luffy	Amazon Kindle	38	09-28-2020 03:49 PM
Calibre 4.10 night mode/dark mode	likeaghost	Calibre	11	05-03-2020 06:43 PM
Dark mode with dark font?	Darkenmal	Calibre	12	11-05-2019 12:24 AM
Latest Kindle paperwhite dark mode question	bounce	Amazon Kindle	5	02-10-2019 10:19 AM

10-24-2021, 03:53 PM	#31
the_Pan Connoisseur Posts: 96 Karma: 15430 Join Date: Mar 2015 Device: Kobo Forma, Pocketbook Era	Hi everyone, I just updated my forma and realized the the the difference how the invert screen is working now. Before I was also able to switch between the modes directly and instantly in the book, now -as you already wrote- I have to go over the main menu or the toc. I also updated nickelmenu to latest 0.5.2. I there a way how get the old switching way back?

10-24-2021, 04:12 PM	#33
the_Pan Connoisseur Posts: 96 Karma: 15430 Join Date: Mar 2015 Device: Kobo Forma, Pocketbook Era	Okay, so I'll choose 1 for a bit longer

01-08-2022, 06:31 PM	#38
jeff47 Connoisseur Posts: 69 Karma: 50592 Join Date: Oct 2010 Device: Kobo Libre H20	Thanks. I do get an error on my Libra H2O using the latest firmware - "unknown setting name "toggle" (arg: 'toggle: dark_mode') (src/action_cc.cc:356) I assume that this is due to an older device? Dark mode is available in the devmode menu but not elsewhere. The "invert and reboot" function does work.

01-09-2022, 01:15 AM	#41
MGlitch Wizard Posts: 2,857 Karma: 22003124 Join Date: Aug 2014 Device: Kobo Forma, Kobo Sage, Kobo Libra 2	Just to add on, the version of nickelmenu you need is in post 555 of the NM thread

01-09-2022, 12:46 PM	#42
RobertJSawyer Guru Posts: 739 Karma: 4306712 Join Date: Jun 2006 Location: Toronto Device: Kobo Libra 2, Clara 2E, and Clara HD; Kindle PaperWhite	Yes, folks, please read my instructions carefully. You must use this version of NickelMenu -- the exact one I linked to and said "Make sure you're using this version." AGAIN: USE ONLY THE VERSION IN THIS MESSAGE: https://www.mobileread.com/forums/sh...&postcount=555