calibre 0.5.3 supports emailing books to the Kindle - Page 3

bwaldron · 03-26-2009, 03:42 PM

Quote:

Originally Posted by pilotbob

I think calibre is going to have to support using an external SMTP server that you can point to, such as your ISP's or other SMTP server.

It does already.

pilotbob · 03-26-2009, 03:43 PM

Quote:

Originally Posted by bwaldron

It does already.

I haven't looked at it yet. So you are saying it asks for your SMTP server address and username/password?

BOb

kovidgoyal · 03-26-2009, 03:45 PM

Quote:

Originally Posted by Emmanuel

I tried, of cource, but I get the following error:

Extracting application files...
Traceback (most recent call last):
File "/tmp/init.py", line 39, in <module>
File "ExtensionLoader_PyQt4_QtCore.py", line 12, in <module>
ImportError: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.8' not found (required by /usr/local/calibre/libglib-2.0.so.0)

the libraries you supply seem too recent as well....

Unfortunately, because of the large number of dependencies calibre has, supporting multiple versions of python gets very hairy very quickly.

kovidgoyal · 03-26-2009, 03:45 PM

Quote:

Originally Posted by pilotbob

I haven't looked at it yet. So you are saying it asks for your SMTP server address and username/password?

BOb

Yeah it does.

kovidgoyal · 03-26-2009, 03:50 PM

@Nate the great: I've uploaded a new windows build that uses blocking sockets. Hopefully that will fix your issue

Emmanuel · 03-26-2009, 03:53 PM

Quote:

Originally Posted by kovidgoyal

Unfortunately, because of the large number of dependencies calibre has, supporting multiple versions of python gets very hairy very quickly.

but in this case, isnt the problem the version of libglib that you provide?

daffy4u · 03-26-2009, 03:53 PM

Here's what I get now:

Code:

C:\>calibre-smtp -vv debXXX@gmail.com XXX@kindle.com "test email"
connect: ('smtp-fw-9101.amazon.com.', 25)
connect: (25, 'smtp-fw-9101.amazon.com.')
reply: '554-smtp-fw-9101.amazon.com\r\n'
reply: '554 SBRS score too low: http://www.senderbase.org/\r\n'
reply: retcode (554); Msg: smtp-fw-9101.amazon.com
SBRS score too low: http://www.senderbase.org/
connect: smtp-fw-9101.amazon.com
SBRS score too low: http://www.senderbase.org/
send: 'ehlo DebXXX-PC.myhome.westell.com\r\n'
connect: ('smtp-fw-2101.amazon.com.', 25)
connect: (25, 'smtp-fw-2101.amazon.com.')
reply: '554-smtp-fw-2101.amazon.com\r\n'
reply: '554 SBRS score too low: http://www.senderbase.org/\r\n'
reply: retcode (554); Msg: smtp-fw-2101.amazon.com
SBRS score too low: http://www.senderbase.org/
connect: smtp-fw-2101.amazon.com
SBRS score too low: http://www.senderbase.org/
send: 'ehlo DebXXX-PC.myhome.westell.com\r\n'
connect: ('smtp-fw-4101.amazon.com.', 25)
connect: (25, 'smtp-fw-4101.amazon.com.')
reply: '554-smtp-fw-4101.amazon.com\r\n'
reply: '554 SBRS score too low: http://www.senderbase.org/\r\n'
reply: retcode (554); Msg: smtp-fw-4101.amazon.com
SBRS score too low: http://www.senderbase.org/
connect: smtp-fw-4101.amazon.com
SBRS score too low: http://www.senderbase.org/
send: 'ehlo DebXXX-PC.myhome.westell.com\r\n'
Traceback (most recent call last):
  File "smtp.py", line 67, in sendmail_direct
  File "smtplib.pyo", line 685, in sendmail
  File "smtplib.pyo", line 509, in ehlo_or_helo_if_needed
  File "smtplib.pyo", line 383, in ehlo
  File "smtplib.pyo", line 340, in getreply
SMTPServerDisconnected: Connection unexpectedly closed

Traceback (most recent call last):
  File "smtp.py", line 239, in <module>
  File "smtp.py", line 216, in main
  File "smtp.py", line 81, in sendmail
  File "smtp.py", line 73, in sendmail_direct
IOError: Failed to send mail: SMTPServerDisconnected('Connection unexpectedly closed',)

kovidgoyal · 03-26-2009, 04:12 PM

looks like I was wrong about amazon, they do filter based on what machine the email is coming from.

OK use the following command to send via your gmail account

Code:

calibre-smtp -r smtp.gmail.com --port 587 --username whatever@gmail.com --password whatever -vv whatever@gmail.com to@address "test email"

kovidgoyal · 03-26-2009, 04:15 PM

Quote:

Originally Posted by Emmanuel

but in this case, isnt the problem the version of libglib that you provide?

yeah but reverting glibc to an earlier version is an even bigger headache. Since glibc IIRC is forwards but not backwards compatible.

daffy4u · 03-26-2009, 04:20 PM

Nothing happens. It just goes back to the c prompt.

Code:

C:\>calibre -r smtp.gmail.com --port 587 --username debXXX@gmail.com --password XXX -vv debXXX@gmail.com XXX@kindle.com "test email"

Edit: The same nothing happens with port 465.

pilotbob · 03-26-2009, 04:29 PM

Quote:

Originally Posted by kovidgoyal

Yeah it does.

Cool beans!

BOb

kovidgoyal · 03-26-2009, 04:33 PM

if it goes back to the command prompt it means the mail was sent,

EDIT: unless you specified the -vv option, which I see you did, so scratch that.

daffy4u · 03-26-2009, 04:35 PM

Quote:

Originally Posted by kovidgoyal

if it goes back to the command prompt it means the mail was sent,

EDIT: unless you specified the -vv option, which I see you did, so scratch that.

Yeah, nothing has shown up on my Kindle. Should I do it again without the -vv?

Edit: I've now tried to send email from Calibre on 2 different Vista machines and one XP with no luck. For the first Vista machine attempt, I was using my AT&T broadband wireless card. One Vista and the XP machine were tested with my Verizon connection.

kovidgoyal · 03-26-2009, 04:55 PM

I've made a couple of changes, and uploaded a new calibre build. Re-install and try the command line again (with -vv)

daffy4u · 03-26-2009, 05:06 PM

Quote:

Originally Posted by kovidgoyal

I've made a couple of changes, and uploaded a new calibre build. Re-install and try the command line again (with -vv)

Still nada with both ports 587 and 465, just a command prompt.

I installed the new build on top of the previous. Should I totally remove it and start fresh?

03-26-2009, 04:12 PM	#38
kovidgoyal creator of calibre Posts: 45,618 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	looks like I was wrong about amazon, they do filter based on what machine the email is coming from. OK use the following command to send via your gmail account Code: calibre-smtp -r smtp.gmail.com --port 587 --username whatever@gmail.com --password whatever -vv whatever@gmail.com to@address "test email"

03-26-2009, 04:20 PM	#40
daffy4u I'm Super Kindle-icious Posts: 6,734 Karma: 2434103 Join Date: Apr 2008 Location: Long Drive, Calinadia Candafornia Device: KDXG, KT, Oasis	Nothing happens. It just goes back to the c prompt. Code: C:\>calibre -r smtp.gmail.com --port 587 --username debXXX@gmail.com --password XXX -vv debXXX@gmail.com XXX@kindle.com "test email" Edit: The same nothing happens with port 465.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amazon charge for emailing from Calibre??	crayonharry	Devices	15	02-19-2011 09:06 AM
emailing books to kindle	krazy4katz	Calibre	2	10-08-2010 01:07 AM
Emailing books from Calibre?	desertgrandma	Amazon Kindle	2	09-18-2010 09:48 PM
Does Calibre supports the collection feature of the new Kindle?	Dave Berk	Calibre	3	08-23-2010 12:18 PM
Emailing Calibre documents	geneaber	Calibre	6	11-16-2009 05:38 AM

03-26-2009, 03:50 PM	#35
kovidgoyal creator of calibre Posts: 45,618 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	@Nate the great: I've uploaded a new windows build that uses blocking sockets. Hopefully that will fix your issue

03-26-2009, 04:33 PM	#42
kovidgoyal creator of calibre Posts: 45,618 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	if it goes back to the command prompt it means the mail was sent, EDIT: unless you specified the -vv option, which I see you did, so scratch that.

03-26-2009, 04:55 PM	#44
kovidgoyal creator of calibre Posts: 45,618 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	I've made a couple of changes, and uploaded a new calibre build. Re-install and try the command line again (with -vv)

Advert

Advert