KOA Kindle Oasis Question - Page 2

CjFox · 03-07-2020, 04:34 PM

Hope this is what you need...?

NiLuJe · 03-07-2020, 06:04 PM

That's the idea, except a log rotation threw a wrench in my plans ;p.

Can you try again right after the JB hotfix install? (i.e., emergency zip, reboot, JB hotfix, ;dm).

CjFox · 03-07-2020, 06:12 PM

I sure can,

Did you want one or two reboots after the emergency zip? Last time it was two

Thanks so much for sticking with me,

NiLuJe · 03-07-2020, 06:52 PM

Two might have been overdoing it a bit. Or not

. Let's try with one. For science!

CjFox · 03-07-2020, 07:10 PM

Ok, in the name of science!

I copied the emergency zip contents to root of the kindle and rebooted.
Then rebooted
Copied the JB hotfix and used UYK
Once the UYK completed, I ran ;dm immediately and here the files are.

CjFox · 03-07-2020, 07:43 PM

Interesting, iit appears i wrote i rebooted twice after the emergency zip,
A correction. it was a single reboot

NiLuJe · 03-07-2020, 07:59 PM

Okay, now I see the JB hotfix failing with a U007, so, at least stuff makes sense now ^^.

TL;DR: Not quite sure why you have ;log mostly working but no JB key, but that's not the first time, so, eh, let's blame it on an old, buggy bridge :/.

CjFox · 03-07-2020, 08:08 PM

Fair enough!

Thanks for looking over it all for me, let me know if I can help you further, or if I should resign myself to standard screensavers

I really appreciate everything,

CjFox · 03-08-2020, 01:24 PM

I'm hoping if I do get either the forma or the libra, it's easier to do the screensaver than it is on kindle. Not sure which yo go for, but I'm looking for a decent one similar to the original oasis.

However, your assistance has been wonderful, even if we cannot resolve it. I do not know if there is a way to thank you on the forums outside of just writing my thanks.

JSWolf · 03-08-2020, 01:41 PM

Quote:

Originally Posted by CjFox

I'm hoping if I do get either the forma or the libra, it's easier to do the screensaver than it is on kindle. Not sure which yo go for, but I'm looking for a decent one similar to the original oasis.

However, your assistance has been wonderful, even if we cannot resolve it. I do not know if there is a way to thank you on the forums outside of just writing my thanks.

What's on the screen when the device goes to sleep should not matter as you will hardly ever see it. With a sleep cover, you close the cover and don't see the screen and when you open the cover, you still don't really eee the image before it goes.

NiLuJe · 03-08-2020, 03:31 PM

Okay, last attempt, for real this time ;p.

Try unpacking this at the USB root, then run ;log r in the search bar.

Plug it back in again, the four files from the zip should now be gone.
If they're still there, eject & unplug, then restart the device (and check again, if they're still there, you can give up now, the rest won't work).

Then try installing the JB hotfix. Then if that works, the KUAL hotfix.

You may also try to install that via MRPI (via ;log mrpi) after a reboot, if the hotfixes didn't pan out.

CjFox · 03-08-2020, 04:43 PM

Good Evening,

Well, looks like it's bad news sadly.
I unpacked the file in the root and ran the command and all four files had vanished, which was good.

I tried the JB hotfix, but got a 007 response when trying to run UYK,

So I tried using ;log mrpi to install things and it's the same as before.

**** **** **** ****

[2020-03-08 @ 20:26:52 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_jailbreak_bridge_1.16.N_install.bin' (jailbreak bridge 1.16.N I) . . .

Failed to parse package 'Update_jailbreak_bridge_1.16.N_install.bin' (jailbreak bridge 1.16.N I) [return code: 127], skipping . . .

KindleTool output:
/mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object

**** **** **** ****

[2020-03-08 @ 20:29:31 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_KUALBooklet_f54e864_install.bin' (KUALBooklet f54e864 I) . . .

Failed to parse package 'Update_KUALBooklet_f54e864_install.bin' (KUALBooklet f54e864 I) [return code: 127], skipping . . .

KindleTool output:
/mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object

**** **** **** ****

[2020-03-08 @ 20:35:24 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_jailbreak_hotfix_1.16.N_install.bin' (jailbreak hotfix 1.16.N I) . . .

Failed to parse package 'Update_jailbreak_hotfix_1.16.N_install.bin' (jailbreak hotfix 1.16.N I) [return code: 127], skipping . . .

KindleTool output:
/mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object

**** **** **** ****

[2020-03-08 @ 20:38:03 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_KUALBooklet_v2.7.22_install.bin' (KUALBooklet v2.7.22 I) . . .

Failed to parse package 'Update_KUALBooklet_v2.7.22_install.bin' (KUALBooklet v2.7.22 I) [return code: 127], skipping . . .

KindleTool output:
/mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object

Ah well, I think we've exhausted things huh?
I can get you the logs if you want?

NiLuJe · 03-08-2020, 04:58 PM

Was that after a reboot (for MRPI, I mean. UYK *should* behave without a reboot. But it might not.)?

And, yeah, logs would be nice

.

CjFox · 03-08-2020, 05:10 PM

Aye, it was after a restart, but I've just done another for good measure,

Put the hotfix for JB and KUAL and used ;log mrpi

Result was:

**** **** **** ****

[2020-03-08 @ 21:03:59 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_jailbreak_hotfix_1.16.N_install.bin' (jailbreak hotfix 1.16.N I) . . .

Failed to parse package 'Update_jailbreak_hotfix_1.16.N_install.bin' (jailbreak hotfix 1.16.N I) [return code: 127], skipping . . .

------

KindleTool output:
/mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object

**** **** **** ****

[2020-03-08 @ 21:04:01 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_KUALBooklet_hotfix_f54e864_install.bin' (KUALBooklet hotfix f54e864 I) . . .

Failed to parse package 'Update_KUALBooklet_hotfix_f54e864_install.bin' (KUALBooklet hotfix f54e864 I) [return code: 127], skipping . . .

KindleTool output:
/mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object

====
I don't s'pose there is a way to manually put the screensavers hack on without going through KUAL etc? The device was originally jalbroken afterall?

NiLuJe · 03-08-2020, 05:27 PM

What you can try is to unpack the previous zip again, and skip straight to a Reboot (i.e., don't run ;log r).

Then try the hotfix via UYK again, or the bridge via mrpi after another reboot.

Logs will be useful, as always

.

EDIT: I'd also update MRPI like in #2 instead of the mangled version I gave you later, just for good measure

.

03-08-2020, 03:31 PM	#26
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Okay, last attempt, for real this time ;p. Try unpacking this at the USB root, then run ;log r in the search bar. Plug it back in again, the four files from the zip should now be gone. If they're still there, eject & unplug, then restart the device (and check again, if they're still there, you can give up now, the rest won't work). Then try installing the JB hotfix. Then if that works, the KUAL hotfix. You may also try to install that via MRPI (via ;log mrpi) after a reboot, if the hotfixes didn't pan out. Last edited by NiLuJe; 11-08-2020 at 05:42 PM. Reason: Removed deprecated attachment. Now bundled in the JailBreak package (as emergency-bridge-recovery.zip)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KOA Kindle Oasis 2016 Edition, Kual Question.	SKK	Kindle Developer's Corner	4	07-12-2019 12:35 PM
Oasis question	rheostaticsfan	Amazon Kindle	2	06-20-2019 09:50 AM
Question about auto light on Oasis and others	TheSmitty	Amazon Kindle	7	01-30-2018 09:30 AM
A question about the new oasis	cvkemp	Amazon Kindle	17	12-18-2017 11:16 PM
Amazon Oasis Replacement Question	Julius Caesar	Amazon Kindle	10	06-07-2016 05:15 PM

03-07-2020, 06:04 PM	#17
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	That's the idea, except a log rotation threw a wrench in my plans ;p. Can you try again right after the JB hotfix install? (i.e., emergency zip, reboot, JB hotfix, ;dm).

03-07-2020, 06:12 PM	#18
CjFox Member Posts: 21 Karma: 1000 Join Date: Mar 2020 Device: Kindle Oasis	I sure can, Did you want one or two reboots after the emergency zip? Last time it was two Thanks so much for sticking with me,

03-07-2020, 06:52 PM	#19
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Two might have been overdoing it a bit. Or not . Let's try with one. For science!

03-07-2020, 07:43 PM	#21
CjFox Member Posts: 21 Karma: 1000 Join Date: Mar 2020 Device: Kindle Oasis	Interesting, iit appears i wrote i rebooted twice after the emergency zip, A correction. it was a single reboot

03-07-2020, 07:59 PM	#22
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Okay, now I see the JB hotfix failing with a U007, so, at least stuff makes sense now ^^. TL;DR: Not quite sure why you have ;log mostly working but no JB key, but that's not the first time, so, eh, let's blame it on an old, buggy bridge :/.

03-07-2020, 08:08 PM	#23
CjFox Member Posts: 21 Karma: 1000 Join Date: Mar 2020 Device: Kindle Oasis	Fair enough! Thanks for looking over it all for me, let me know if I can help you further, or if I should resign myself to standard screensavers I really appreciate everything,

03-08-2020, 01:24 PM	#24
CjFox Member Posts: 21 Karma: 1000 Join Date: Mar 2020 Device: Kindle Oasis	I'm hoping if I do get either the forma or the libra, it's easier to do the screensaver than it is on kindle. Not sure which yo go for, but I'm looking for a decent one similar to the original oasis. However, your assistance has been wonderful, even if we cannot resolve it. I do not know if there is a way to thank you on the forums outside of just writing my thanks.

03-08-2020, 04:43 PM	#27
CjFox Member Posts: 21 Karma: 1000 Join Date: Mar 2020 Device: Kindle Oasis	Good Evening, Well, looks like it's bad news sadly. I unpacked the file in the root and ran the command and all four files had vanished, which was good. I tried the JB hotfix, but got a 007 response when trying to run UYK, So I tried using ;log mrpi to install things and it's the same as before. ** [2020-03-08 @ 20:26:52 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_jailbreak_bridge_1.16.N_install.bin' (jailbreak bridge 1.16.N I) . . . Failed to parse package 'Update_jailbreak_bridge_1.16.N_install.bin' (jailbreak bridge 1.16.N I) [return code: 127], skipping . . . KindleTool output: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object [2020-03-08 @ 20:29:31 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_KUALBooklet_f54e864_install.bin' (KUALBooklet f54e864 I) . . . Failed to parse package 'Update_KUALBooklet_f54e864_install.bin' (KUALBooklet f54e864 I) [return code: 127], skipping . . . KindleTool output: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object [2020-03-08 @ 20:35:24 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_jailbreak_hotfix_1.16.N_install.bin' (jailbreak hotfix 1.16.N I) . . . Failed to parse package 'Update_jailbreak_hotfix_1.16.N_install.bin' (jailbreak hotfix 1.16.N I) [return code: 127], skipping . . . KindleTool output: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object ** [2020-03-08 @ 20:38:03 -0001] :: [MRPI r16914] - Beginning the processing of package 'Update_KUALBooklet_v2.7.22_install.bin' (KUALBooklet v2.7.22 I) . . . Failed to parse package 'Update_KUALBooklet_v2.7.22_install.bin' (KUALBooklet v2.7.22 I) [return code: 127], skipping . . . KindleTool output: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: error while loading shared libraries: /mnt/us/extensions/MRInstaller/bin/PW2/kindletool: failed to map segment from shared object Ah well, I think we've exhausted things huh? I can get you the logs if you want?

03-08-2020, 04:58 PM	#28
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Was that after a reboot (for MRPI, I mean. UYK should behave without a reboot. But it might not.)? And, yeah, logs would be nice .

03-08-2020, 05:27 PM	#30
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	What you can try is to unpack the previous zip again, and skip straight to a Reboot (i.e., don't run ;log r). Then try the hotfix via UYK again, or the bridge via mrpi after another reboot. Logs will be useful, as always . EDIT: I'd also update MRPI like in #2 instead of the mangled version I gave you later, just for good measure .