Sigil-1.1.0 Released - Page 3

Mister L · 02-10-2020, 02:18 PM

Quote:

Originally Posted by DiapDealer

Sigil-1.1.0

Thanks to everyone involved.

Quote:

Originally Posted by DiapDealer

New Features (since the 1.0.0 release):

Added support for a second Clip bar with up to 20 additional clips

Yay! Just a question, is it / would it be possible to manually determine which / how many clips go in each bar? I ask because currently I have a full top bar with almost half the clips hidden (unless I click the "more" arrow), it would be useful to move the overflow to the second bar, but I can't see a way to do this (am I missing something obvious?).

Quote:

Originally Posted by DiapDealer

Guide and Nav titles are now translated into ebook language (if translations available)

Nice

If these are translated for the Nav is it possible to apply the translations to the landmarks as well? Currently the nav h1 title is correctly translated but <h2>Landmarks</h2> is not and the link to the nav in the landmarks is still in english also (I checked the translation site, the translation for "landmarks" should be available).

Quote:

Originally Posted by DiapDealer

[*]Clips from the Clips QDockwidget window can now be used in CSS Tabs as well.

Thank you

Quote:

Originally Posted by DiapDealer

Bug Fixes (since the 1.0.0 release):
[*]Fixed bug in 'split at cursor" that created extra empty pages

BeckyEbook · 02-10-2020, 02:26 PM

Quote:

Originally Posted by Mister L

Nice

If these are translated for the Nav is it possible to apply the translations to the landmarks as well? Currently the nav h1 title is correctly translated but <h2>Landmarks</h2> is not and the link to the nav in the landmarks is still in english also (I checked the translation site, the translation for "landmarks" should be available).

It works for me. I see (in Polish):

Code:

<h2>Punkty orientacyjne</h2>

Maybe "Landmarks" has not been translated in your language?

KevinH · 02-10-2020, 02:37 PM

The first clips bar has to be all used before the second will begin to be used. This was not meant to foster organization but to extend the the sheer number of clips and either/both can be hidden.

You can move the primary clips bar to its own line so that you can see it all.

KevinH

Quote:

Originally Posted by Mister L

Thanks to everyone involved.

Yay! Just a question, is it / would it be possible to manually determine which / how many clips go in each bar? I ask because currently I have a full top bar with almost half the clips hidden (unless I click the "more" arrow), it would be useful to move the overflow to the second bar, but I can't see a way to do this (am I missing something obvious?).

Nice

If these are translated for the Nav is it possible to apply the translations to the landmarks as well? Currently the nav h1 title is correctly translated but <h2>Landmarks</h2> is not and the link to the nav in the landmarks is still in english also (I checked the translation site, the translation for "landmarks" should be available).

Thank you

Mister L · 02-10-2020, 02:37 PM

Quote:

Originally Posted by BeckyEbook

It works for me. I see (in Polish):

Code:

<h2>Punkty orientacyjne</h2>

Maybe "Landmarks" has not been translated in your language?

I checked, it has been ("Points de repère" https://www.transifex.com/zdpo/sigil...xt%3Alandmarks), I thought also of that so I was going to translate it myself. But maybe it was translated after this version came out, if it's working in Polish. I don't know how to see the date of the translation.

Mister L · 02-10-2020, 02:38 PM

Quote:

Originally Posted by KevinH

The first clips bar has to be all used before the second will begin to be used. This was not meant to foster organization but to extend the the sheer number of clips and either/both can be hidden.

KevinH

Got it. Still useful, thanks.

BeckyEbook · 02-10-2020, 02:44 PM

Hmmm…
Change language in metadata (opf file) to French and try again.
This option works depending on the language of the ebook, not the language of the Sigil interface.

Mister L · 02-10-2020, 02:49 PM

Quote:

Originally Posted by BeckyEbook

Hmmm…
Change language in metadata (opf file) to French and try again.
This option works depending on the language of the ebook, not the language of the Sigil interface.

Yes, book language in metadata is french, sigil interface language is english. The option is partially working because the Table of Contents is correctly translated as <h1>Table des matières</h1>. But Landmarks (title and content) is not translated :

Edit : I see it is working for you, now I am more confused.

Mister L · 02-10-2020, 02:54 PM

Quote:

Originally Posted by KevinH

You can move the primary clips bar to its own line so that you can see it all.

It already has its own line

But the Sigil main window is not wide enough because I need room for preview and other things (notepad, sometimes the pdf from the print version as a reference...). It's not a big problem, I was just wondering if there was a way that I didn't find. No worries if this was not the intended way of functioning.

KevinH · 02-10-2020, 03:05 PM

I could tweak it next release to hold 15 in a bar instead of 20 if all 40 are rarely used by anyone.

BeckyEbook · 02-10-2020, 03:09 PM

Quote:

Originally Posted by Mister L

Edit : I see it is working for you, now I am more confused.

Indeed, there is a problem here that I did not notice during testing.
For this to work correctly, try first disable the "Table des matières" semantics for the nav.xhtml file, and then enable it again.
I think this workaround should help.

Mister L · 02-10-2020, 03:46 PM

Quote:

Originally Posted by KevinH

I could tweak it next release to hold 15 in a bar instead of 20 if all 40 are rarely used by anyone.

Don't change it just for me, presumably this was added because there are other people with a lot of clips and they wanted more accessible in the clips bar(s) (and have wider windows / screens), no need to reduce the number if it suits others.

Maybe I will pad the clips bar and put less-used clips in the second half to bump the more important ones to the second bar.

Quote:

Originally Posted by BeckyEbook

Indeed, there is a problem here that I did not notice during testing.
For this to work correctly, try first disable the "Table des matières" semantics for the nav.xhtml file, and then enable it again.
I think this workaround should help.

Fiou I was starting to think I was going crazy

thanks, that fixed it.

KevinH · 02-10-2020, 04:12 PM

Yes, each area of the nav is processed separately. Areas of the nav not involved in a particular operation will/should remain untouched. So an operation that modifies the Landmarks (such as add semantics) would be needed to see any changes in Landmarks in the nav.

Mister L · 02-10-2020, 09:26 PM

Quote:

Originally Posted by KevinH

Yes, each area of the nav is processed separately. Areas of the nav not involved in a particular operation will/should remain untouched. So an operation that modifies the Landmarks (such as add semantics) would be needed to see any changes in Landmarks in the nav.

Ha okay that explains it, thanks.

Turtle91 · 02-10-2020, 09:43 PM

Quote:

Originally Posted by KevinH

I could tweak it next release to hold 15 in a bar instead of 20 if all 40 are rarely used by anyone.

pwettypweez don't - Dobby needs more space than he rightly deserves...

KevinH · 02-10-2020, 11:08 PM

no worries.

Quote:

Originally Posted by Turtle91

pwettypweez don't - Dobby needs more space than he rightly deserves...

02-10-2020, 02:44 PM	#36
BeckyEbook Guru Posts: 900 Karma: 3501166 Join Date: Jan 2017 Location: Poland Device: Various	Hmmm… Change language in metadata (opf file) to French and try again. This option works depending on the language of the ebook, not the language of the Sigil interface. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sigil-0.9.10 Released	DiapDealer	Sigil	149	11-19-2018 11:20 PM
Sigil-0.8.900 released for testing - Wait for Sigil-0.8.901	KevinH	Sigil	106	10-04-2015 11:41 AM
Sigil 0.8.2 Released	user_none	Sigil	12	12-22-2014 07:02 PM
Sigil 0.8.0 Released	user_none	Sigil	126	10-11-2014 08:52 PM
Sigil 0.5.3 Released	user_none	Sigil	85	05-13-2012 06:29 AM

02-10-2020, 03:05 PM	#39
KevinH Sigil Developer Posts: 9,072 Karma: 6361556 Join Date: Nov 2009 Device: many	I could tweak it next release to hold 15 in a bar instead of 20 if all 40 are rarely used by anyone.

02-10-2020, 04:12 PM	#42
KevinH Sigil Developer Posts: 9,072 Karma: 6361556 Join Date: Nov 2009 Device: many	Yes, each area of the nav is processed separately. Areas of the nav not involved in a particular operation will/should remain untouched. So an operation that modifies the Landmarks (such as add semantics) would be needed to see any changes in Landmarks in the nav.