Help unbricking PW2

dom123dom · 12-30-2018, 02:44 AM

I've been reading the forum a lot to try to fix my Kindle Paperwhite 2 after I stupidly accepted a firmware update request. It is a 2013 wifi 4Gb model. (Serial number starts with 9017)

As a total novice, I have managed to make a serial connection and follow the guide here: https://www.mobileread.com/forums/sh...d.php?t=267541

I'm up to the part where I copy the jailbreak files onto the kindle, which I've done. However my problem is the kindle keeps rebooting itself and halting. Eventually it ends up with a message on screen "Your kindle needs repairing. Error Code 2"

This is the boot sequence:

Code:

U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   38 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: S/N: 9017<the_rest_removed>
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3901 mV

Hit any key to stop autoboot:  1  0 
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098460] No Legacy reboot reason code to print
[    0.278815] LPDDR2 MfgId: 0x1 [Samsung]
[    0.282678] 
[    0.282681] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.295131] 
[    0.295134] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.304017] 
[    0.304020] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.312436] 
[    0.312439] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.323216] 
[    0.323219] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.336547] 
[    0.336550] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.346512] 
[    0.346515] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.359989] 
[    0.359992] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.369876] 
[    0.369878] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.75:49.1:
info milestone:6.79:49.2:
info milestone:6.82:49.3:
info milestone:6.86:49.4:
info milestone:6.89:49.5:
info sytem:mounted_tmpfs::
info milestone:6.96:sy50:
info system:start:time=6990:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.14:sy51:
lipc-send-event[804]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[804]: C def:dbusi::Failed to init dbus
lipc-send-event[804]: E def:open::Failed to open LIPC
lipc-send-event[804]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[803]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[803]: C def:dbusi::Failed to init dbus
lipc-send-event[803]: E def:open::Failed to open LIPC
lipc-send-event[803]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.03:sy99:
info system:done:time=8060:
crond[818]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (816) terminated with status 2
init.exe: sshd main process endeiniü.exe: recevent pre-start procinfo system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.80:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.08:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.18:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.24:fs25:



Welcome to Kindle!

kindle login: info milestone:9.27:vi00:
info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.37:vi99:
info display:started:time=11390:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11600,action=start:
info battery:charged:cap=58,mV=3893,mAH=844:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:13.51:fs50:
info milestone:13.55:fs90:
info milestone:13.59:fs99:
info milestone:13.65:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.94:xx00:
info X:load:time=15120:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.75:xx50:
info X:starting:time=16820:
info milestone:20.69:xx99:
info X:started:time=20740:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:22.05:pi00:
info milestone:22.29:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:32.63:fr00:
info milestone:32.74:fr50:
info milestone:32.77:fr51:
info framework:starting:time=33680:
rootcrit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:

#################################################
#  N O T I C E  *  N O T I C E  *  N O T I C E  # 
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@kindle root]# info milestone:40.17:pi00:
info milestone:40.33:pi99:

[root@kindle root]# 
[root@kindle root]# 
[root@kindle root]# 
[root@kindle root]# info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:50.65:fr00:
info milestone:50.76:fr50:
info milestone:50.77:fr51:
info framework:starting:time=51580:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:55.67:pi00:
info milestone:55.81:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:66.14:fr00:
info milestone:66.24:fr50:
info milestone:66.27:fr51:
info framework:starting:time=67080:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=1:rebooting system:

Broadcast message from root@kindle
	(unknown) at 19:42 ...

The system is going down for reboot NOW!
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4210,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=82900,action=stop:
info userstore:filesystem sync done::
err mntus:partition_unmount_failed::partition unmount failed (1)
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4510,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[   87.487344] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   87.493404] Restarting system.


U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   42 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: 9017<the_rest_removed>
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3899 mV

Hit any key to stop autoboot:  1  0 
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098510] 
[    0.272476] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276551] 
[    0.276555] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289107] 
[    0.289111] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.297956] 
[    0.297958] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306286] 
[    0.306290] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317127] 
[    0.317130] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331483] 
[    0.331486] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343627] 
[    0.343630] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.354042] 
[    0.354045] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363945] 
[    0.363948] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.65:49.1:
info milestone:6.70:49.2:
info milestone:6.72:49.3:
info milestone:6.76:49.4:
info milestone:6.79:49.5:
info sytem:mounted_tmpfs::
info milestone:6.86:sy50:
info system:start:time=6890:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.04:sy51:
lipc-send-event[801]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[801]: C def:dbusi::Failed to init dbus
lipc-send-event[801]: E def:open::Failed to open LIPC
lipc-send-event[801]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[802]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[802]: C def:dbusi::Failed to init dbus
lipc-send-event[802]: E def:open::Failed to open LIPC
lipc-send-event[802]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:7.91:sy99:
info system:done:time=7940:
crond[815]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (813) terminated with status 2
init.exe: sshd main process ended, respawning
init.exe: recevent pre-start process (818) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.69:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.97:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.08:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.13:fs25:
info milestone:9.17:vi00:



Welcome to Kindle!

kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.30:vi99:
info display:started:time=11320:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11530,action=start:
info battery:charged:cap=61,mV=3903,mAH=856:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:13.41:fs50:
info milestone:13.45:fs90:
info milestone:13.50:fs99:
info milestone:13.55:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:15.32:xx00:
info X:load:time=15440:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.86:xx50:
info X:starting:time=16910:
info milestone:20.75:xx99:
info X:started:time=20800:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:22.25:pi00:
info milestone:22.46:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:32.74:fr00:
info milestone:32.85:fr50:
info milestone:32.86:fr51:
info framework:starting:time=33790:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:40.29:pi00:
info milestone:40.43:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:50.80:fr00:
info milestone:50.90:fr50:
info milestone:50.92:fr51:
info framework:starting:time=51740:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:55.81:pi00:
info milestone:55.96:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:66.31:fr00:
info milestone:66.41:fr50:
info milestone:66.43:fr51:
info framework:starting:time=67250:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=2:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4580,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=82370,action=stop:
info userstore:filesystem sync done::
err mntus:partition_unmount_failed::partition unmount failed (1)
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=3460,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[   85.894232] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   85.900292] Restarting system.


U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   43 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: S/N: 9017<the_rest_removed>
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3905 mV

Hit any key to stop autoboot:  1  0 
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098450] 
[    0.272391] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276471] 
[    0.276474] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289012] 
[    0.289015] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.297861] 
[    0.297864] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306191] 
[    0.306194] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317023] 
[    0.317026] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331352] 
[    0.331355] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343483] 
[    0.343486] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.353884] 
[    0.353887] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363774] 
[    0.363777] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.65:49.1:
info milestone:6.70:49.2:
info milestone:6.72:49.3:
info milestone:6.76:49.4:
info milestone:6.79:49.5:
info sytem:mounted_tmpfs::
info milestone:6.86:sy50:
info system:start:time=6890:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.04:sy51:
lipc-send-event[804]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[804]: C def:dbusi::Failed to init dbus
lipc-send-event[804]: E def:open::Failed to open LIPC
lipc-send-event[804]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[802]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[802]: C def:dbusi::Failed to init dbus
lipc-send-event[802]: E def:open::Failed to open LIPC
lipc-send-event[802]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:7.89:sy99:
info system:done:time=7920:
crond[817]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (815) terminated with status 2
init.exe: sshd main process endedinit.exe: recevent pre-start process (820) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.69:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.97:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.07:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.13:fs25:
info milestone:9.16:vi00:



Welcome to Kindle!

kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.24:vi99:
info display:started:time=11260:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11470,action=start:
info battery:charged:cap=61,mV=3897,mAH=866:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:13.37:fs50:
info milestone:13.41:fs90:
info milestone:13.45:fs99:
info milestone:13.50:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.64:xx00:
info X:load:time=14820:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.58:xx50:
info X:starting:time=16650:
info milestone:21.64:xx99:
info X:started:time=21690:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
crit lab126_gui:reboots=2,max=2:shutting down and showing customer service page:
info shutdown:begin:level=0,halt=1,special=cust_service:
info shutdown:closing password dialog::
info log_var_local_folder_sizes:printing varlocal folder sizes:254.0K	/var/local/appreg.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:0	/var/local/appregdbupgrade:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K	/var/local/archive:
info log_var_local_folder_sizes:printing varlocal folder sizes:70.0K	/var/local/blanket:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/cc:
info log_var_local_folder_sizes:printing varlocal folder sizes:169.0K	/var/local/cc.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:829.0K	/var/local/certman:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K	/var/local/cvm:
info log_var_local_folder_sizes:printing varlocal folder sizes:41.0K	/var/local/dcm.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:97.0K	/var/local/firstReboot.gz:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K	/var/local/font:
info log_var_local_folder_sizes:printing varlocal folder sizes:10.0K	/var/local/grok.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/guid:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/halt_reason:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.2M	/var/local/java:
info log_var_local_folder_sizes:printing varlocal folder sizes:717.0K	/var/local/log:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/logLevel.conf:
info log_var_local_folder_sizes:printing varlocal folder sizes:63.0K	/var/local/merchant:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.8M	/var/local/mesquite:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/metrics_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:918.0K	/var/local/odot_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:13.0K	/var/local/odot_outbox_discard:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/odotlite_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:715.0K	/var/local/printklogs:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/recent_searches.json:
info log_var_local_folder_sizes:printing varlocal folder sizes:200.0K	/var/local/reg:
info log_var_local_folder_sizes:printing varlocal folder sizes:85.0K	/var/local/system:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K	/var/local/tmd:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K	/var/local/todo:
info log_var_local_folder_sizes:printing varlocal folder sizes:5.0K	/var/local/token:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K	/var/local/upstart:
info log_var_local_folder_sizes:printing varlocal folder sizes:60.0K	/var/local/wsync.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K	/var/local/xorg.conf:
info log_df_h:printing df -h:Filesystem                Size      Used Available Use% Mounted on:
info log_df_h:printing df -h:/dev/root               348.1M    292.9M     48.2M  86% /:
info log_df_h:printing df -h:tmpfs                   124.7M    100.0K    124.6M   0% /dev:
info log_df_h:printing df -h:tmpfs                   124.7M         0    124.7M   0% /dev/shm:
info log_df_h:printing df -h:tmpfs                    32.0M    352.0K     31.7M   1% /var:
info log_df_h:printing df -h:/dev/loop/2               2.5M      2.5M         0 100% /usr/share/X11/xkb:
info log_df_h:printing df -h:/dev/loop/3             103.1M    103.1M         0 100% /usr/java/lib/fonts:
info log_df_h:printing df -h:/dev/loop/4               1.4M      1.4M         0 100% /etc/kdb.src:
info log_df_h:printing df -h:/dev/loop/5               9.1M      9.1M         0 100% /usr/lib/locale:
info log_df_h:printing df -h:/dev/loop/6              22.2M     22.2M         0 100% /usr/share/keyboard:
info log_df_h:printing df -h:/dev/mmcblk0p3           62.0M     14.5M     44.3M  25% /var/local:
info log_df_h:printing df -h:fsp                     348.1M    292.9M     48.2M  86% /mnt/us:
info log_version_txt:printing /etc/version.txt:System Software Version: 002-juno_60102_pinot_wario-254770:
info log_version_txt:printing /etc/version.txt:Wed Dec 10 13:54:22 PST 2014:
info log_version_txt:printing /etc/version.txt:com.lab126.eink.pinot.os:
crit shutdown:Entering repair screen:uploading logs ...:
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:cust_service
info shutdown_showimage:screen:waiting for cust_service screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=5010,timeout_ms=45000:
info shutdown:cust_service:starting:
info ss_cust_service:nothing to do for this shutdown mode:"cust_service":
info ss_cust_service:completed successfully::
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=35040,action=stop:
info userstore:filesystem sync done::
err mntus:partition_unmount_failed::partition unmount failed (1)
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=3510,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=0,halt=1:
[   38.624179] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   38.630240] System halted.

I can interrupt the boot and get into diag mode which prevents the restarts and eventual halt. Perhaps I should run the Jailbreak from there? Or perhaps I should be doing some sort of firmware re-flashing rather than the jailbreak steps?

Would really appreciate some advice, not sure what my next move should be...

knc1 · 12-30-2018, 03:13 AM

Code:

err mntus:partition_unmount_failed::partition unmount failed (1)

Capture the serial port output again, this time with the USB cord unplugged.

Earlier it looks like you have a partial system image.
How did you transfer the image you show running to the main partition?

dom123dom · 12-30-2018, 03:30 AM

Thanks for your reply

Quote:

Originally Posted by knc1

Earlier it looks like you have a partial system image.
How did you transfer the image you show running to the main partition?

All I've done so far is copy the Jailbreak files onto the kindle via USB, I haven't actually executed them yet.

Quote:

Originally Posted by knc1

Capture the serial port output again, this time with the USB cord unplugged.

This is a boot sequence without the USB to PC cable plugged in:

Code:

U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   37 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: 9017<the_rest_removed>
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3999 mV

Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098451] No Legacy reboot reason code to print
[    0.278885] LPDDR2 MfgId: 0x1 [Samsung]
[    0.282747]
[    0.282751] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.295200]
[    0.295204] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.304086]
[    0.304089] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.312507]
[    0.312509] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.323288]
[    0.323291] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.336619]
[    0.336622] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.346585]
[    0.346588] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.360064]
[    0.360067] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.369953]
[    0.369955] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.75:49.1:
info milestone:6.79:49.2:
info milestone:6.82:49.3:
info milestone:6.86:49.4:
info milestone:6.89:49.5:
info sytem:mounted_tmpfs::
info milestone:6.96:sy50:
info system:start:time=6990:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.14:sy51:
lipc-send-event[808]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[808]: C def:dbusi::Failed to init dbus
lipc-send-event[808]: E def:open::Failed to open LIPC
lipc-send-event[808]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[807]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: C def:dbusi::Failed to init dbus
lipc-send-event[807]: E def:open::Failed to open LIPC
lipc-send-event[807]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.03:sy99:
info system:done:time=8060:
crond[821]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (819) terminated with status 2
init.exe: sshÿ main process endediniü.exe: recevent pre-start proinfo system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.80:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.04:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.14:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.20:fs25:
info milestone:9.23:vi00:



Welcome to Kindle!

kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.35:vi99:
info display:started:time=11360:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11580,action=start:
info battery:charged:cap=73,mV=3934,mAH=1070:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:13.47:fs50:
info milestone:13.51:fs90:
info milestone:13.55:fs99:
info milestone:13.61:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.76:xx00:
info X:load:time=14920:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.71:xx50:
info X:starting:time=16770:
info milestone:20.74:xx99:
info X:started:time=20750:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:22.07:pi00:
info milestone:22.28:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:24.31:fr00:
info milestone:24.50:fr50:
info milestone:24.54:fr51:
info framework:starting:time=26340:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:32.87:pi00:
info milestone:33.05:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:34.91:fr00:
info milestone:35.06:fr50:
info milestone:35.10:fr51:
info framework:starting:time=36440:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:40.54:pi00:
info milestone:40.72:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:42.67:fr00:
info milestone:42.79:fr50:
info milestone:42.81:fr51:
info framework:starting:time=44130:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=1:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=5290,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=61090,action=stop:
info userstore:filesystem sync done::
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4510,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[   65.657365] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   65.663425] Restarting system.


U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   41 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: S/N: 9017<the_rest_removed>
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3920 mV

Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098472]
[    0.272401] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276481]
[    0.276485] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289019]
[    0.289023] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.297868]
[    0.297871] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306198]
[    0.306201] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317032]
[    0.317035] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331367]
[    0.331370] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343500]
[    0.343503] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.353896]
[    0.353898] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363786]
[    0.363789] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.72:49.1:
info milestone:6.76:49.2:
info milestone:6.79:49.3:
info milestone:6.83:49.4:
info milestone:6.86:49.5:
info sytem:mounted_tmpfs::
info milestone:6.93:sy50:
info system:start:time=6960:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.11:sy51:
lipc-send-event[806]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: C def:dbusi::Failed to init dbus
lipc-send-event[807]: E def:open::Failed to open LIPC
lipc-send-event[807]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[806]: C def:dbusi::Failed to init dbus
lipc-send-event[806]: E def:open::Failed to open LIPC
lipc-send-event[806]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.01:sy99:
info system:done:time=8039:
init.exe: sshd main process (826) terminated with status 2
init.exe: sshd main process ended, respawning
crond[828]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (831) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.78:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.02:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.13:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.18:fs25:
info milestone:9.21:vi00:



Welcome to Kindle!

kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.30:vi99:
info display:started:time=11320:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11530,action=start:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
info battery:charged:cap=77,mV=3913,mAH=1069:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.75:fs50:
info milestone:12.79:fs90:
info milestone:12.84:fs99:
info milestone:12.90:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:13.92:xx00:
info X:load:time=14110:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:15.99:xx50:
info X:starting:time=16059:
info milestone:20.10:xx99:
info X:started:time=20150:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:21.88:pi00:
info milestone:22.12:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:24.16:fr00:
info milestone:24.34:fr50:
info milestone:24.37:fr51:
info framework:starting:time=26110:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:32.98:pi00:
info milestone:33.16:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:35.07:fr00:
info milestone:35.19:fr50:
info milestone:35.23:fr51:
info framework:starting:time=36560:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:40.63:pi00:
info milestone:40.81:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:42.76:fr00:
info milestone:42.89:fr50:
info milestone:42.93:fr51:
info framework:starting:time=44220:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=2:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4890,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=59670,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4789,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[   64.554185] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   64.560245] Restarting system.


U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   41 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: S/N: 9017<the_rest_removed>
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3916 mV

Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098470]
[    0.272462] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276543]
[    0.276546] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289096]
[    0.289099] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.297943]
[    0.297946] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306275]
[    0.306277] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317114]
[    0.317117] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331462]
[    0.331464] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343607]
[    0.343610] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.354021]
[    0.354024] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363923]
[    0.363925] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.64:49.1:
info milestone:6.68:49.2:
info milestone:6.71:49.3:
info milestone:6.75:49.4:
info milestone:6.78:49.5:
info sytem:mounted_tmpfs::
info milestone:6.85:sy50:
info system:start:time=6880:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.03:sy51:
lipc-send-event[799]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[799]: C def:dbusi::Failed to init dbus
lipc-send-event[799]: E def:open::Failed to open LIPC
lipc-send-event[799]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[800]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[800]: C def:dbusi::Failed to init dbus
lipc-send-event[800]: E def:open::Failed to open LIPC
lipc-send-event[800]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:7.93:sy99:
info system:done:time=7960:
init.exe: sshd main process (811) terminated with status 2
init.exe: sshd main process ended, respawning
crond[813]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (816) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.70:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.94:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.04:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.09:fs25:
info milestone:9.12:vi00:



Welcome to Kindle!

kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.22:vi99:
info display:started:time=11240:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11440,action=start:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
info battery:charged:cap=76,mV=3911,mAH=1067:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.64:fs50:
info milestone:12.68:fs90:
info milestone:12.73:fs99:
info milestone:12.79:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.14:xx00:
info X:load:time=14290:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:15.87:xx50:
info X:starting:time=15940:
info milestone:20.84:xx99:
info X:started:time=20880:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
crit lab126_gui:reboots=2,max=2:shutting down and showing customer service page:
info shutdown:begin:level=0,halt=1,special=cust_service:
info shutdown:closing password dialog::
info log_var_local_folder_sizes:printing varlocal folder sizes:254.0K   /var/local/appreg.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:0        /var/local/appregdbupgrade:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K     /var/local/archive:
info log_var_local_folder_sizes:printing varlocal folder sizes:70.0K    /var/local/blanket:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/cc:
info log_var_local_folder_sizes:printing varlocal folder sizes:169.0K   /var/local/cc.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:829.0K   /var/local/certman:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K     /var/local/cvm:
info log_var_local_folder_sizes:printing varlocal folder sizes:41.0K    /var/local/dcm.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:111.0K   /var/local/firstReboot.gz:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K     /var/local/font:
info log_var_local_folder_sizes:printing varlocal folder sizes:10.0K    /var/local/grok.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/guid:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/halt_reason:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.2M     /var/local/java:
info log_var_local_folder_sizes:printing varlocal folder sizes:800.0K   /var/local/log:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/logLevel.conf:
info log_var_local_folder_sizes:printing varlocal folder sizes:63.0K    /var/local/merchant:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.8M     /var/local/mesquite:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/metrics_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:918.0K   /var/local/odot_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:13.0K    /var/local/odot_outbox_discard:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/odotlite_outbox:
info log_var_local_folder_sizes:printing varlocal folder sizes:715.0K   /var/local/printklogs:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/recent_searches.json:
info log_var_local_folder_sizes:printing varlocal folder sizes:200.0K   /var/local/reg:
info log_var_local_folder_sizes:printing varlocal folder sizes:86.0K    /var/local/system:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K     /var/local/tmd:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K     /var/local/todo:
info log_var_local_folder_sizes:printing varlocal folder sizes:5.0K     /var/local/token:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K     /var/local/upstart:
info log_var_local_folder_sizes:printing varlocal folder sizes:60.0K    /var/local/wsync.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K     /var/local/xorg.conf:
info log_df_h:printing df -h:Filesystem                Size      Used Available Use% Mounted on:
info log_df_h:printing df -h:/dev/root               348.1M    292.9M     48.2M  86% /:
info log_df_h:printing df -h:tmpfs                   124.7M    100.0K    124.6M   0% /dev:
info log_df_h:printing df -h:tmpfs                   124.7M         0    124.7M   0% /dev/shm:
info log_df_h:printing df -h:tmpfs                    32.0M    352.0K     31.7M   1% /var:
info log_df_h:printing df -h:/dev/loop/2               2.5M      2.5M         0 100% /usr/share/X11/xkb:
info log_df_h:printing df -h:/dev/loop/3             103.1M    103.1M         0 100% /usr/java/lib/fonts:
info log_df_h:printing df -h:/dev/loop/4               1.4M      1.4M         0 100% /etc/kdb.src:
info log_df_h:printing df -h:/dev/loop/5               9.1M      9.1M         0 100% /usr/lib/locale:
info log_df_h:printing df -h:/dev/loop/6              22.2M     22.2M         0 100% /usr/share/keyboard:
info log_df_h:printing df -h:/dev/mmcblk0p3           62.0M     14.6M     44.2M  25% /var/local:
info log_df_h:printing df -h:/dev/loop/0               3.2G    115.5M      3.1G   4% /mnt/base-us:
info log_df_h:printing df -h:fsp                       3.2G    115.5M      3.1G   4% /mnt/us:
info log_version_txt:printing /etc/version.txt:System Software Version: 002-juno_60102_pinot_wario-254770:
info log_version_txt:printing /etc/version.txt:Wed Dec 10 13:54:22 PST 2014:
info log_version_txt:printing /etc/version.txt:com.lab126.eink.pinot.os:
crit shutdown:Entering repair screen:uploading logs ...:
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:cust_service
info shutdown_showimage:screen:waiting for cust_service screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4500,timeout_ms=45000:
info shutdown:cust_service:starting:
info ss_cust_service:nothing to do for this shutdown mode:"cust_service":
info ss_cust_service:completed successfully::
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=34060,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4760,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=0,halt=1:
[   38.884261] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   38.890321] System halted.

dom123dom · 12-30-2018, 04:14 AM

Sniffing around, maybe this is as simple as applying a firmware update?

Something like this:
https://www.mobileread.com/forums/sh...&postcount=392

Quote:

1)At first I had to download the correct Firmware for my device (In my case it was "factory_KT3_5.8.0_initial.bin" )
2)Then I renamed it to update.bin (necessary in a later step) and put it to the root directory of my kindle
3) I connected the Serial-USB-Converter to my kindle
4) I startet the device and interrupted the booting sequence by pressing the "enter" button to get into uboot
5)Here I entered the command "run diags_boot" to get into diagnostics mode
6)After the diagnostics mode was fully loaded I pressed enter to get into kindle Login
7)I logged in with "root" and password "mario"
8)When I got logged in I entered "reboot"
9)Now in the boot sequence there was an entry to get into recovery mode. It was shown up just for about 1 second. When this entry was shown I had to press "enter" to get into this mode.
10) Now I got into recovery mode.
11) Here I had 10 seconds time to choose one of the operations.
12) I entered "u" for "Update using update*.bin file on FAT Partition"
13) When the update was finished I was on Firmware 5.8.0

dom123dom · 12-30-2018, 05:26 PM

One thing I forgot to mention that might be critical....I tried to use the DO_FACTORY_RESTORE method when this first happened. It didn't appear to do anything but thought I should mention it.

I really want to get this fixed!

dom123dom · 12-30-2018, 07:12 PM

2Had an epiphany while reading another thread....I did not have the power cable connected to wall power while doing the DO_FACTORY_RESET it was connected to the PC, so I decided to have another go and this time I could watch from the serial port and see what was going on.

I put back the DO_FACTORY_RESET file into the root of the kindle over USB, then connected the cable to wall charger, reboot and voila! It performed a factory reset and the kindle came up as if I never used it before, re-registered and it's back online.

Suck it Amazon you bastards for telling me it would never work and trying to make me buy a new one! Worst service ever from a usually great company.

In case it's useful for someone else, here's the most recent bits of the serial log, I think it does the reset in here.

Code:

U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   37 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: 901722
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 4001 mV

Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098514]
[    0.272546] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276624]
[    0.276627] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289178]
[    0.289181] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.298026]
[    0.298028] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306354]
[    0.306357] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317193]
[    0.317196] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331545]
[    0.331548] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343690]
[    0.343692] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.354098]
[    0.354101] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363998]
[    0.364000] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.72:49.1:
info milestone:6.76:49.2:
info milestone:6.79:49.3:
info milestone:6.83:49.4:
info milestone:6.86:49.5:
info sytem:mounted_tmpfs::
info milestone:6.93:sy50:
info system:start:time=6960:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.11:sy51:
lipc-send-event[806]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[806]: C def:dbusi::Failed to init dbus
lipc-send-event[806]: E def:open::Failed to open LIPC
lipc-send-event[806]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[805]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[805]: C def:dbusi::Failed to init dbus
lipc-send-event[805]: E def:open::Failed to open LIPC
lipc-send-event[805]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.01:sy99:
info system:done:time=8039:
init.exe: sshd main process (817) terminated with status 2
init.exe: sshd main process ended, respawning
crond[819]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (822) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.78:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.08:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.22:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:



Welcome to Kindle!

kindle login: info milestone:9.28:fs25:
info milestone:9.31:vi00:
info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.42:vi99:
info display:started:time=11440:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11650,action=start:
info userstore:found_bootup_flag::Found BOOTUP flag file
info battery:charged:cap=83,mV=4001,mAH=1163:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:13.54:fs50:
info milestone:13.58:fs90:
info milestone:13.63:fs99:
info milestone:13.68:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:15.09:xx00:
info X:load:time=15250:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.86:xx50:
info X:starting:time=16920:
info milestone:20.82:xx99:
info X:started:time=20860:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:22.18:pi00:
info milestone:22.41:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:32.72:fr00:
info milestone:32.82:fr50:
info milestone:32.84:fr51:
info framework:starting:time=33750:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:40.23:pi00:
info milestone:40.37:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:46.12:fr00:
info milestone:46.22:fr50:
info milestone:46.23:fr51:
info framework:starting:time=47040:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:51.21:pi00:
info milestone:51.39:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:53.23:fr00:
info milestone:53.39:fr50:
info milestone:53.42:fr51:
info framework:starting:time=54770:
crit lab126_gui_monitor:abnormalstop:job=framework,res=failed,sts=2:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=1:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4640,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=70950,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=3730,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[   74.754334] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   74.760394] Restarting system.


U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   40 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: 901722
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 4001 mV

Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098489]
[    0.272450] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276532]
[    0.276535] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289084]
[    0.289087] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.297933]
[    0.297936] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306265]
[    0.306267] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317106]
[    0.317108] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331459]
[    0.331462] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343602]
[    0.343605] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.354016]
[    0.354019] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363917]
[    0.363919] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
Press [ENTER] for recovery menu...       0 //dev/mmcblk0p4:
CHS=4/16/104512 size=3424649216 bytes
flag type      first       last  lba first   lba size
Partition p1:
0x00 0x0b         16 <large>            16    6688752
    CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.72:49.1:
info milestone:6.76:49.2:
info milestone:6.79:49.3:
info milestone:6.83:49.4:
info milestone:6.86:49.5:
info sytem:mounted_tmpfs::
info milestone:6.93:sy50:
info system:start:time=6960:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:7.11:sy51:
lipc-send-event[808]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[808]: C def:dbusi::Failed to init dbus
lipc-send-event[808]: E def:open::Failed to open LIPC
lipc-send-event[808]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[807]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[807]: C def:dbusi::Failed to init dbus
lipc-send-event[807]: E def:open::Failed to open LIPC
lipc-send-event[807]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:8.01:sy99:
info system:done:time=8039:
init.exe: sshd main process (819) terminated with status 2
init.exe: sshd main process ended, respawning
crond[821]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (824) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.77:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.01:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.11:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.17:fs25:
info milestone:9.20:vi00:



Welcome to Kindle!

kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.31:vi99:
info display:started:time=11330:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11540,action=start:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
info battery:charged:cap=83,mV=4002,mAH=1169:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.76:fs50:
info milestone:12.80:fs90:
info milestone:12.85:fs99:
info milestone:12.90:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.01:xx00:
info shutdown:begin:level=6,halt=0,special=factory_reset:
info X:load:time=14190:
info X:xorg.conf:Generating xorg.conf:
info shutdown:closing password dialog::
warn shutdown_showimage:x/blanket is not running:screen not updated:
warn shutdown:splash image not displayed::
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
info X:xorg.conf:xorg.conf generated:
info milestone:16.54:xx50:
info X:starting:time=16720:
info upstart_f:jobs_stopped:elapsed_ms=4300,timeout_ms=45000:
info shutdown:factory_reset:starting:
info hardware:no_wan::WiFi only device. No WAN found
info ss_factory_reset:cleaning misc files::
info ss_factory_reset:erasing waveforms::
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=22980,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4180,timeout_ms=30000:
info ss_factory_reset:erasing partition:name="userstore" partition=/dev/mmcblk0p4:secure erase from 1044480 of 6688768 sectors
[   32.555606] mmc0: Got data interrupt 0x00100000 even though no data operation was in progress.
info ss_factory_reset:partition erased successfully:name="userstore" partition=/dev/mmcblk0p4:
info ss_factory_reset:erasing partition:name="/var/local" partition=/dev/mmcblk0p3:overwriting first 4096 of 65536 blocks
info ss_factory_reset:partition erased successfully:name="/var/local" partition=/dev/mmcblk0p3:
info ss_factory_reset:marking system factory-fresh::
info ss_factory_reset:marking system no_transitions for volumd and powerd::
info ss_factory_reset:marking system factory-fresh-authentication::
info ss_factory_reset:completed successfully::
info upstart_f:job_already_stopped:job=filesystems:
info upstart_f:jobs_stopped:elapsed_ms=0,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=0:
[   93.744192] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[   93.751376] Restarting system.


U-Boot 2009.08-lab126 (Aug 05 2014 - 04:37:39)

CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature:   42 C, calibration data 0x5df5515f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
MMC:  FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 0272201144120JFX
S/N: 901722
I2C:   ready
DRAM:  256 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 4000 mV

Hit any key to stop autoboot:  0
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-3.0.35-lab126
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2593852 Bytes =  2.5 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.098508]
[    0.272454] LPDDR2 MfgId: 0x1 [Samsung]
[    0.276534]
[    0.276537] just text: vaddr c013f678, va 0xc013f200 pa 0x801000c3 attr 0x6
[    0.289088]
[    0.289091] nmx6sl_wfi_iram: vaddr d084e000, va 0xd084e200 pa 0x904043 attr 0x2
[    0.297935]
[    0.297938] mx6sl_ddr: vaddr d0856000, va 0xd0856200 pa 0x905043 attr 0x2
[    0.306265]
[    0.306268] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x149
[    0.317105]
[    0.317108] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[    0.331454]
[    0.331457] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[    0.343600]
[    0.343603] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[    0.354013]
[    0.354016] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[    0.363914]
[    0.363917] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Wed Dec 10 13:49:16 PST 2014 armv7l
[    0.542581] FAT-fs (loop1): bogus number of reserved sectors
[    1.585658] imx_epdc_fb imx_epdc_fb: Failed to load fw! (err -2) Trying fallback fw
[    1.633538] panel_get_upd_modes: Unknown waveform mode. Using MODE_07!
Press [ENTER] for recovery menu...       0 /BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.25:49.1:
info milestone:6.30:49.2:
info milestone:6.32:49.3:
info milestone:6.36:49.4:
info milestone:6.39:49.5:
info sytem:mounted_tmpfs::
info milestone:6.46:sy50:
info system:start:time=6490:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=pinot,rev=34,proto=Y,wifi=Y,wan=N:
info milestone:6.64:sy51:
lipc-send-event[817]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[817]: C def:dbusi::Failed to init dbus
lipc-send-event[817]: E def:open::Failed to open LIPC
lipc-send-event[817]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[816]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[816]: C def:dbusi::Failed to init dbus
lipc-send-event[816]: E def:open::Failed to open LIPC
lipc-send-event[816]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:7.53:sy99:
info system:done:time=7560:
crond[847]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (845) terminated with status 2
init.exe: sshþ main process endediniþ.exe: recevent pre-start procinfo system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.32:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.56:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info filesystems_var_local:createvarlocal:Creating /var/local filesystem:



Welcome to Kindle!

kindle login: info filesystems_var_local:notransitionsexists:file=/var/local/system/no_transitions:Already exists
info filesystems_var_local:createvarlocalfirstboot:file=/var/local/system/localvar_firstboot:Creating var local first boot file
info milestone:10.24:fs23:
info system:emiting_event:migrate_DB:
debug sytem:event_emitted:migrate_DB:
info filesystems_var_local:createvarlocaldbupgrade:file=/var/local/system/LOCALVAR_DBUPGRADE:Creating var local db upgrade file
info filesystems_var_local:xfsn-deprecate:start:
info milestone:10.31:mdb1:
info milestone:10.34:mdb2:
info DB_MIGRATION:Moving cc db to tmpfs::
info filesystems_var_local:xfsn-deprecate:done:
info milestone:10.39:fs25:
info milestone:10.39:mdb5:
info milestone:10.42:mdb25:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:10.53:vi00:
[   11.518191] FAT-fs (loop1): bogus number of reserved sectors
info display:update:Checking '/opt/eink/images/G112_ED060XD4U2' for overrides:
info display:update:No waveform found. Extracting waveform from panel.:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info display:update:Extracted waveform into /var/local/eink/waveforms/320_G112_AA9124_ED060XD4U2_TC.wbf:
info display:update:Copied waveform from /var/local/eink/waveforms/320_G112_AA9124_ED060XD4U2_TC.wrf.gz into /mnt/wfm/waveform_to_use:
info milestone:28.30:vi99:
info display:started:time=28320:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=28480,action=start:
info userstore:mntus.param_not_found::mntus.param not found, initializing volume
info userstore:check_us::checking userstore filesystem
info battery:charged:cap=84,mV=4009,mAH=1178:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info mntus:fs_error_recover::File system errors recovered
info userstore:create_default::creating userstore system and documents directories I
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:36.37:fs50:
info milestone:36.39:fs90:
info milestone:36.42:fs99:
info milestone:36.44:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:37.62:xx00:
info X:load:time=37780:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:39.04:xx50:
info X:starting:time=39100:
info milestone:41.41:xx99:
info X:started:time=41450:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:pick::Picking Language
info locale:wait::
info hardware:no_wan::WiFi only device. No WAN found
info board_data_file :/opt/ar6k/target/AR6003/hw2.1.1/bin/wario/pinot/wfo/AR6003_wfo_calfile.bin::
info wifim:enablediv:enabling antenna diversity for wifi...:
[   52.734570] ath6kl: ath6kl_fetch_board_file: Board calibration file fetched: /opt/ar6k/target/AR6003/hw2.1.1/bin/wario/pinot/wfo/AR6003_wfo_calfile.bin
[   52.812534] ath6kl: MAC from kernel xx:xx:xx:xx:xx:9A
[   52.825679] ath6kl: temporary war to avoid sdio crc error
[   53.226694] ath6kl: host only supports scatter of :1 entries, need: 16



Welcome to Kindle!

kindle login: root
#################################################
#  N O T I C E  *  N O T I C E  *  N O T I C E  #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@kindle root]# info locale:set::User Picked Language
info locale:read:lang=en_GB.utf8,lc_all=en_GB.utf8:Set Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:483.54:pi00:
info milestone:483.70:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:486.22:fr00:
info milestone:486.35:fr50:
info milestone:486.37:fr51:
info framework:starting:time=487720:
info milestone:516.40:fr99:
info framework:started:time=516419,delta=30059:
info blanket_f:loading blanket module:usb:
info blanket_f:unloading blanket module:splash:
info system:emiting_event:framework_ready:
debug sytem:event_emitted:framework_ready:
info stored:started::
info stored:read_in_counters:REBOOTS=0, REBOOT_LIMIT=1, RESTARTS=0, RESTART_LIMIT=5:
info monitor:writing_file:file=/var/run/upstart/stored.restarts:
Retrieved 314 keys for system/daemon/pmond/

[root@kindle root]#

This is the bit where I think the magic happened, I assume it must have a backup firmware image which it has used instead of the shitty useless one it downloaded and applied from Amazon.

Quote:

[ 1.585658] imx_epdc_fb imx_epdc_fb: Failed to load fw! (err -2) Trying fallback fw

Next steps.....should I leave as-is, update to latest Amazon firmware or Jailbreak current firmware?

Seems I am on firmware version 5.6.1.0.2
First 6 chars of s/n: 901722

knc1 · 12-30-2018, 10:38 PM

For your own sake, please go back to your log post and X out all except the first six characters of your device's serial number.

With serial port access, you can always recover the device.
It has been done even after installing a brand new eMMC device (which is about as blank as blank can be).

Amazon does not post a checksum for their file downloads, so the best thing to do is download the same file (renaming as you go) two or three times, then compare them, the checksum utility you use should give the same result on all of them.

Note: It is possible for the Kindle's internal updater to get an update partially installed and then fail.
Unlike some other embedded systems, it can not un-do the changes which it made.

dom123dom · 12-31-2018, 05:24 PM

Quote:

Originally Posted by knc1

For your own sake, please go back to your log post and X out all except the first six characters of your device's serial number.

Done, thanks forgot to do that in the last post!

Quote:

Originally Posted by knc1

With serial port access, you can always recover the device.
It has been done even after installing a brand new eMMC device (which is about as blank as blank can be).

Amazon does not post a checksum for their file downloads, so the best thing to do is download the same file (renaming as you go) two or three times, then compare them, the checksum utility you use should give the same result on all of them.

Thanks I did look for the old firmware images in this thread: https://www.mobileread.com/forums/sh...d.php?t=275877 but the links for the PW2 firmware are dead or require login. Is there an archive of old firmware versions somewhere?

Quote:

Originally Posted by knc1

Note: It is possible for the Kindle's internal updater to get an update partially installed and then fail.
Unlike some other embedded systems, it can not un-do the changes which it made.

It seems likely this could be what happened. I've been running my kindle on aeroplane mode for years. I'm sort of tempted to download and install the latest firmware from Amazon to see if it works but I don't want to brick it again and I've already put the case back together so would have to re-solder (pin method didn't work consistently for me). Maybe I will just leave as-is, I have created the fake directory to prevent further firmware updates.

knc1 · 12-31-2018, 05:52 PM

Amazon does not remove firmware files from their server.
They only remove the old links from the "device page".
So you could say that Amazon runs its own archive.

The bad links you mentioned are all to "factory-use-only" firmware versions used in jail breaking, not customer-use firmware builds.

If you went to the PW2 device page now, you would find the current firmware's URL:
https://s3.amazonaws.com/firmwaredow..._v2_5.10.2.bin

but instead you want a less current firmware, just change the firmware numeric field in the URL (for PW2-5.9.6):
https://s3.amazonaws.com/firmwaredow...e_v2_5.9.6.bin

Hint:
If you quote this post, you can see the full URL rather than the shortened version.

dom123dom · 12-31-2018, 06:27 PM

Quote:

Originally Posted by knc1

Amazon does not remove firmware files from their server.
They only remove the old links from the "device page".
So you could say that Amazon runs its own archive.

The bad links you mentioned are all to "factory-use-only" firmware versions used in jail breaking, not customer-use firmware builds.

If you went to the PW2 device page now, you would find the current firmware's URL:
https://s3.amazonaws.com/firmwaredow..._v2_5.10.2.bin

but instead you want a less current firmware, just change the firmware numeric field in the URL (for PW2-5.9.6):
https://s3.amazonaws.com/firmwaredow...e_v2_5.9.6.bin

Hint:
If you quote this post, you can see the full URL rather than the shortened version.

That's exactly what I was after, thank you.

I've read a lot of your posts in various threads over the last week or so, I really appreciate the expertise and effort you put in to the site.

I think I'm going to keep an eye on the classifieds and see if I can pick up a 'broken' kindle to play with.

knc1 · 12-31-2018, 07:41 PM

Thanks.

cyang · 01-21-2019, 07:35 AM

I have same device with you, kp2.
I update the rom in 5.10.2, and I wonder if any way to downgrade.
Thanks!

knc1 · 01-21-2019, 08:53 AM

Quote:

Originally Posted by cyang

I have same device with you, kp2.
I update the rom in 5.10.2, and I wonder if any way to downgrade.
Thanks!

What is a KP2?
https://wiki.mobileread.com/wiki/Kindle_Serial_Numbers
We give the models names based on serial numbers for a reason:
Hint: Just because the ourside says "Kindle" does not mean the insides (electronics) are all the same.

cyang · 01-21-2019, 09:16 AM

Quote:

Originally Posted by knc1

What is a KP2?
https://wiki.mobileread.com/wiki/Kindle_Serial_Numbers
We give the models names based on serial numbers for a reason:
Hint: Just because the ourside says "Kindle" does not mean the insides (electronics) are all the same.

Thanks for replay.
It's my bad. My devices is Kindle Paperwhite 2, s/n is 9017 0000 0000 0000.

knc1 · 01-21-2019, 10:15 AM

Quote:

Originally Posted by cyang

Thanks for replay.
It's my bad. My devices is Kindle Paperwhite 2, s/n is 9017 0000 0000 0000.

If not already jail broken, then using the serial port is the only way to downgrade from that firmware version.

01-21-2019, 07:35 AM	#12
cyang Junior Member Posts: 3 Karma: 10 Join Date: Jan 2019 Location: ShenZhen China Device: Kindle pw2	can you help me I have same device with you, kp2. I update the rom in 5.10.2, and I wonder if any way to downgrade. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which one are you ordering: PW2 wifi or PW2 3G	jocampo	Amazon Kindle	37	08-18-2014 10:48 AM
Need help for unbricking PW 5.3.1	szfisher	Kindle Developer's Corner	22	07-12-2013 08:38 AM
Help Unbricking K3 with ATK	tootie1221	Kindle Developer's Corner	9	08-30-2012 09:07 AM
HELP PLEASE!!! Unbricking EE	Yellowman1	enTourage eDGe	8	07-21-2011 08:54 AM
Help Unbricking PE	vicinc	enTourage eDGe	113	07-16-2011 12:40 AM

12-30-2018, 03:13 AM	#2
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Code: err mntus:partition_unmount_failed::partition unmount failed (1) Capture the serial port output again, this time with the USB cord unplugged. Earlier it looks like you have a partial system image. How did you transfer the image you show running to the main partition?

12-30-2018, 05:26 PM	#5
dom123dom Zealot Posts: 106 Karma: 10 Join Date: Dec 2018 Location: Sydney, Australia Device: Kindle Paperwhite 2 WiFi 4Gb 2013 (s/n 9017..)	One thing I forgot to mention that might be critical....I tried to use the DO_FACTORY_RESTORE method when this first happened. It didn't appear to do anything but thought I should mention it. I really want to get this fixed!

12-30-2018, 10:38 PM	#7
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	For your own sake, please go back to your log post and X out all except the first six characters of your device's serial number. With serial port access, you can always recover the device. It has been done even after installing a brand new eMMC device (which is about as blank as blank can be). Amazon does not post a checksum for their file downloads, so the best thing to do is download the same file (renaming as you go) two or three times, then compare them, the checksum utility you use should give the same result on all of them. Note: It is possible for the Kindle's internal updater to get an update partially installed and then fail. Unlike some other embedded systems, it can not un-do the changes which it made.

12-31-2018, 05:52 PM	#9
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Amazon does not remove firmware files from their server. They only remove the old links from the "device page". So you could say that Amazon runs its own archive. The bad links you mentioned are all to "factory-use-only" firmware versions used in jail breaking, not customer-use firmware builds. If you went to the PW2 device page now, you would find the current firmware's URL: https://s3.amazonaws.com/firmwaredow..._v2_5.10.2.bin but instead you want a less current firmware, just change the firmware numeric field in the URL (for PW2-5.9.6): https://s3.amazonaws.com/firmwaredow...e_v2_5.9.6.bin Hint: If you quote this post, you can see the full URL rather than the shortened version.

12-31-2018, 07:41 PM	#11
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Thanks.