File name of adding eBook

SAFisher · 10-05-2016, 12:33 PM

When calibre adds an eBook to the library, the file name does of the eBook title and author hyphenated "<title> - <author>". The title is truncated to 42 characters. Question: how to remove this limit or to keep the original file names.

itimpi · 10-05-2016, 12:47 PM

Quote:

Originally Posted by SAFisher

When calibre adds an eBook to the library, the file name does of the eBook title and author hyphenated "<title> - <author>". The title is truncated to 42 characters. Question: how to remove this limit or to keep the original file names.

You cannot control the format of the file names Calibre uses to store books in its library. They are always in a fixed format based on the book author and title. There is a sticky discussing this.

You can control the format of file names when you export books from the Calibre library

SAFisher · 10-05-2016, 01:41 PM

Quote:

Originally Posted by itimpi

You cannot control the format of the file names Calibre uses to store books in its library. They are always in a fixed format based on the book author and title. There is a sticky discussing this.

You can control the format of file names when you export books from the Calibre library

Thanks for the answer. But it's one of the reasons for not using calibre. I need a long file names.

PeterT · 10-05-2016, 01:49 PM

Nothing prevents long file names on EXPORTing them

SAFisher · 10-05-2016, 02:05 PM

Quote:

Originally Posted by PeterT

Nothing prevents long file names on EXPORTing them

I would like prefer not to add by copying to a library of eBooks and keep my library as it is. And exporting files does not interest me.

itimpi · 10-05-2016, 02:09 PM

Quote:

Originally Posted by SAFisher

I would like prefer not to add by copying to a library of eBooks and keep my library as it is. And exporting files does not interest me.

if you really need this, then Calibre Library Management is not compatible with this.

You can do conversions using the Calibre Command Line interface and use any file names that you like as in that case you are not loading books into the Calibre library.

SAFisher · 10-05-2016, 02:35 PM

Quote:

Originally Posted by itimpi

if you really need this, then Calibre Library Management is not compatible with this.

You can do conversions using the Calibre Command Line interface and use any file names that you like as in that case you are not loading books into the Calibre library.

Question. Can I connect my existing library of eBooks to calibre not adding (not copying them) in the calibre?

itimpi · 10-05-2016, 02:37 PM

Quote:

Originally Posted by SAFisher

Question. Can I connect my existing library of eBooks to calibre not adding (not copying them) in the calibre?

No, this is not an option supported by Calibre.

BetterRed · 10-05-2016, 02:44 PM

Quote:

Originally Posted by SAFisher

Question. Can I connect my existing library of eBooks to calibre not adding (not copying them) in the calibre?

No - see Want to change folder structure or file names in the Calibre library?

When you Add (Import) books to library you can record the name or path name of the file added in a custom database column, using the GetFileName optional plugin

Moderator Notice
I moved your thread out of Development, see sticky PLEASE READ BEFORE POSTING - Purpose of Development subforum

BR

JSWolf · 10-05-2016, 03:00 PM

For those who say it has to be dome my way, Calibre is not for you.

jgaiser · 10-05-2016, 03:52 PM

The simple way to think about the library is that it is a database. The database stores it's information in the way that works for the database. (Famous quote)-Don't look under the skirts. If you want a specific name for your books EXPORT.

fidvo · 10-05-2016, 05:26 PM

You have two choices: Keep your files in your own structure, or use the library management features of Calibre. These two are incompatible with each other.

If you really insist on keeping your files where they are, you can still use other parts of Calibre. For instance, you can use it for conversion (import into Calibre, convert, export from Calibre, delete book from Calibre). You can also use Calibre's reader for your books (associate ebook file types with ebook-viewer). It's fairly modular like that.

I would recommend at least trying Calibre's library management features however. First, write down all the reasons why you have to keep the books in a specific folder structure. Second, import your books into Calibre, but keep the original copies as they are. Now go through your list of reasons you need the files in your folder structure, and see if Calibre can duplicate the functionality you need. (For instance, if you find a hierarchical structure familiar and easy to work with, you can set up a custom hierarchical field in Calibre and navigate it through the Tag Browser)

If it doesn't work out, well, no harm done. Delete your Calibre library and go back to doing things the way you did before.

I say this from experience. For a year I used Calibre only for conversion and reading, because I just HAD to have my books in their own directory structure. Then I decided to try things the Calibre way just as an experiment. After giving myself a couple of weeks to adjust, I never looked back.

BetterRed · 10-05-2016, 09:55 PM

- once I got a few basics sorted out, I got rid of the directory structure I had, and just as importantly the spreadsheet catalogues that went with them.

BR

theducks · 10-05-2016, 10:40 PM

Calibre can find and deliver books without being limited to a Single file path that your current system uses,

which is similar to a Dead Tree Library:
1)look up the book in the card (e)Catalog
2Note the Dewey Call #
3)Locate the shelf
4)Locate the book

Calibre is a Library MANAGER
1) Use the Tag Browser to build a Search or just type it in
2)Select the book from the results
3)click Send or View

Step 1 is the same for either Calibre or Dead Tree.

Is your system that flexible?

SAFisher · 10-06-2016, 12:27 AM

Quote:

Originally Posted by theducks

Calibre can find and deliver books without being limited to a Single file path that your current system uses,

which is similar to a Dead Tree Library:
1)look up the book in the card (e)Catalog
2Note the Dewey Call #
3)Locate the shelf
4)Locate the book

Calibre is a Library MANAGER
1) Use the Tag Browser to build a Search or just type it in
2)Select the book from the results
3)click Send or View

Step 1 is the same for either Calibre or Dead Tree.

Is your system that flexible?

I use macOS Sierra

10-05-2016, 12:33 PM	#1
SAFisher Member Posts: 10 Karma: 10 Join Date: Oct 2016 Device: No	File name of adding eBook When calibre adds an eBook to the library, the file name does of the eBook title and author hyphenated "<title> - <author>". The title is truncated to 42 characters. Question: how to remove this limit or to keep the original file names.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adding file...	KyBunnies	Library Management	1	05-25-2015 02:49 PM
adding a file	Notjohn	Sigil	4	12-19-2014 09:21 AM
Can't save after adding file	phossler	Editor	2	12-25-2013 12:24 PM
Adding notes to a file, then convert it to an ebook and be able to read it in Kindle	aquazula	Amazon Kindle	2	05-11-2013 05:43 PM
adding a CSS to a file	BeccaPrice	Calibre	8	09-18-2011 03:52 PM

10-05-2016, 01:49 PM	#4
PeterT Grand Sorcerer Posts: 13,535 Karma: 78910202 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	Nothing prevents long file names on EXPORTing them

10-05-2016, 03:00 PM	#10
JSWolf Resident Curmudgeon Posts: 79,792 Karma: 146391129 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	For those who say it has to be dome my way, Calibre is not for you.

10-05-2016, 03:52 PM	#11
jgaiser Omnivorous Posts: 3,283 Karma: 27978909 Join Date: Feb 2008 Location: Rural NW Oregon Device: Kindle Voyage, Kindle Fire HD, Kindle 3, KPW1	The simple way to think about the library is that it is a database. The database stores it's information in the way that works for the database. (Famous quote)-Don't look under the skirts. If you want a specific name for your books EXPORT.

10-05-2016, 05:26 PM	#12
fidvo Addict Posts: 309 Karma: 1645952 Join Date: Jun 2012 Device: none	You have two choices: Keep your files in your own structure, or use the library management features of Calibre. These two are incompatible with each other. If you really insist on keeping your files where they are, you can still use other parts of Calibre. For instance, you can use it for conversion (import into Calibre, convert, export from Calibre, delete book from Calibre). You can also use Calibre's reader for your books (associate ebook file types with ebook-viewer). It's fairly modular like that. I would recommend at least trying Calibre's library management features however. First, write down all the reasons why you have to keep the books in a specific folder structure. Second, import your books into Calibre, but keep the original copies as they are. Now go through your list of reasons you need the files in your folder structure, and see if Calibre can duplicate the functionality you need. (For instance, if you find a hierarchical structure familiar and easy to work with, you can set up a custom hierarchical field in Calibre and navigate it through the Tag Browser) If it doesn't work out, well, no harm done. Delete your Calibre library and go back to doing things the way you did before. I say this from experience. For a year I used Calibre only for conversion and reading, because I just HAD to have my books in their own directory structure. Then I decided to try things the Calibre way just as an experiment. After giving myself a couple of weeks to adjust, I never looked back.

10-05-2016, 09:55 PM	#13
BetterRed null operator (he/him) Posts: 21,740 Karma: 30237526 Join Date: Mar 2012 Location: Sydney Australia Device: none	- once I got a few basics sorted out, I got rid of the directory structure I had, and just as importantly the spreadsheet catalogues that went with them. BR

10-05-2016, 10:40 PM	#14
theducks Well trained by Cats Posts: 31,076 Karma: 60358908 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	Calibre can find and deliver books without being limited to a Single file path that your current system uses, which is similar to a Dead Tree Library: 1)look up the book in the card (e)Catalog 2Note the Dewey Call # 3)Locate the shelf 4)Locate the book Calibre is a Library MANAGER 1) Use the Tag Browser to build a Search or just type it in 2)Select the book from the results 3)click Send or View Step 1 is the same for either Calibre or Dead Tree. Is your system that flexible?