calibre shutting down message: odd location

DrChiper · 04-11-2016, 12:22 PM

I noticed after the last 2 updates that whenever I closed down calibre, the window did seem to expand somehow. Via a capture I could see there was a new message "Shutting down", which is in itself correct

but hardly visible.

Why is it located in that new odd location for such a brief time and for instance not in the lower left info bar? Does it also indicate something else which is shutting down?

PeterT · 04-11-2016, 12:23 PM

I think this is referring to the Content Server shutting down

eschwartz · 04-11-2016, 01:58 PM

That is meant to happen. The "shutting down" message is meant to assure you that calibre is indeed trying to shut down, even though e.g. the content server can take a while to shutdown, holding calibre open in the process.

I guess it makes sense to display that message front and center.

Terisa de morgan · 04-11-2016, 02:16 PM

Quote:

Originally Posted by eschwartz

That is meant to happen. The "shutting down" message is meant to assure you that calibre is indeed trying to shut down, even though e.g. the content server can take a while to shutdown, holding calibre open in the process.

I guess it makes sense to display that message front and center.

If you're not like me, that I've seen a bigger zone when calibre is closing but I haven't tried to check what there's in that zone.

BetterRed · 04-11-2016, 04:38 PM

If calibre is minimised when you close it, you'll miss out on seeing the 'closing down' message (unless you Restore or Maximise it) which IMO is a good thing.

BR

Terisa de morgan · 04-11-2016, 04:44 PM

It's not minimised but full screen. I don't pay attention, however.

dwig · 04-11-2016, 07:05 PM

Quote:

Originally Posted by eschwartz

...
I guess it makes sense to display that message front and center.

True, but its new and is an odd and novel way to do it. Most apps that feel the need to display such a message (e.g. when shutdown may take a while and they feel the need to acknowledge that action is being taken, ...) they do it in a new popup window.

The new, novel behavior is a bit unsettling at first. The main UI jumps down and a wide band appears between the button bar and the main UI. In this wide bar there is simply a very small message. Even on my somewhat slow Window8.1 tablet the message doesn't appear long enough to read, at least the first few times you see the startling new UI behavior. It was only after I'd seen it several times and became confident that it wasn't some odd failure that I noticed the message. Until then, my concentration always followed the book list down to its new position. The message location doesn't attract attention and thus fails to be a good design.

theducks · 04-11-2016, 07:33 PM

Slightly

What about shutting down the CLI version of server. I just close (the minimized) window. I tried ctrl-C, Ctrl-D, ctrl-Z

in the server command window

kovidgoyal · 04-11-2016, 09:04 PM

If you dont run the content server or any db shutdown plugins then the message will be visible only very briefly, otherwise it can be useful as shutdown can take arbitrary amounts of time. I have made it an overlay which should make it much less disruptive.

BetterRed · 04-11-2016, 09:17 PM

Quote:

Originally Posted by theducks

Slightly

What about shutting down the CLI version of server. I just close (the minimized) window. I tried ctrl-C, Ctrl-D, ctrl-Z

in the server command window

I would guess the calibre-server task doesn't listen to the keyboard. I've not figured out how to resolve this 'which one is which' dilemma - not that I've tried very hard

Click image for larger version

Name: Clipboard01.jpg
Views: 241
Size: 5.9 KB
ID: 147768

Fortunately I run ConEmu as my 'real console.

Maybe the new server will run as a service with a controller in the tray

Quote:

Originally Posted by dwig

True, but its new and is an odd and novel way to do it. Most apps that feel the need to display such a message (e.g. when shutdown may take a while and they feel the need to acknowledge that action is being taken, ...) they do it in a new popup window.

The ones I can think of use a balloon message rather than a traditional popup window - but do all the supported platforms have such things and does Qt support them?

BR

kovidgoyal · 04-11-2016, 09:28 PM

Ctrl-C works on all OSes other than windows and Ctrl-C will work on windows as well in the new server.

eschwartz · 04-11-2016, 09:29 PM

Quote:

Originally Posted by theducks

Slightly

What about shutting down the CLI version of server. I just close (the minimized) window. I tried ctrl-C, Ctrl-D, ctrl-Z

in the server command window

I run it (on linux) as a systemd service, so it isn't in any window (or dropdown, actually).

Code:

systemctl start|stop|status calibre-server

dwig · 04-15-2016, 01:35 PM

I just installed the new v2.55 on both my Win10 desktop box and my Win8.1 tablet. The new shutdown message looks good. Its a nice fix, thanks Kovid.

MerlinMama · 04-15-2016, 02:43 PM

Yes, I really like the overlay better.

kovidgoyal · 04-15-2016, 10:12 PM

Glad to hear it

04-11-2016, 12:22 PM	#1
DrChiper Bookish Posts: 1,049 Karma: 2006208 Join Date: Jun 2011 Device: PC, t1, t2, t3, Clara BW, Clara HD, Libra 2, Libra Color, Nxtpaper 11	calibre shutting down message: odd location I noticed after the last 2 updates that whenever I closed down calibre, the window did seem to expand somehow. Via a capture I could see there was a new message "Shutting down", which is in itself correct but hardly visible. Why is it located in that new odd location for such a brief time and for instance not in the lower left info bar? Does it also indicate something else which is shutting down? Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shutting down remote calibre instance	bickleigh	Calibre	15	02-14-2014 04:03 AM
Calibre shutting itself down?	Turtle91	Devices	2	10-17-2013 10:40 PM
Odd FC message 6.0	theducks	Sigil	2	10-28-2012 07:46 PM
Odd EPUB error message on lulu.com	lordshell	Conversion	6	11-07-2011 11:16 PM
Odd behaviour of Calibre in Windows 7	bmeddings	Calibre	10	04-16-2010 09:59 AM

04-11-2016, 12:23 PM	#2
PeterT Grand Sorcerer Posts: 13,693 Karma: 79983758 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	I think this is referring to the Content Server shutting down

04-11-2016, 01:58 PM	#3
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	That is meant to happen. The "shutting down" message is meant to assure you that calibre is indeed trying to shut down, even though e.g. the content server can take a while to shutdown, holding calibre open in the process. I guess it makes sense to display that message front and center.

04-11-2016, 04:38 PM	#5
BetterRed null operator (he/him) Posts: 22,010 Karma: 30277294 Join Date: Mar 2012 Location: Sydney Australia Device: none	If calibre is minimised when you close it, you'll miss out on seeing the 'closing down' message (unless you Restore or Maximise it) which IMO is a good thing. BR

04-11-2016, 04:44 PM	#6
Terisa de morgan Grand Sorcerer Posts: 6,686 Karma: 12595249 Join Date: Jun 2009 Location: Madrid, Spain Device: Kobo Clara/Aura One/Forma,XiaoMI 5, iPad, Huawei MediaPad, YotaPhone 2	It's not minimised but full screen. I don't pay attention, however.

04-11-2016, 07:33 PM	#8
theducks Well trained by Cats Posts: 31,249 Karma: 61360164 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	Slightly What about shutting down the CLI version of server. I just close (the minimized) window. I tried ctrl-C, Ctrl-D, ctrl-Z in the server command window

04-11-2016, 09:04 PM	#9
kovidgoyal creator of calibre Posts: 45,604 Karma: 28548974 Join Date: Oct 2006 Location: Mumbai, India Device: Various	If you dont run the content server or any db shutdown plugins then the message will be visible only very briefly, otherwise it can be useful as shutdown can take arbitrary amounts of time. I have made it an overlay which should make it much less disruptive.

04-11-2016, 09:28 PM	#11
kovidgoyal creator of calibre Posts: 45,604 Karma: 28548974 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Ctrl-C works on all OSes other than windows and Ctrl-C will work on windows as well in the new server.

04-15-2016, 01:35 PM	#13
dwig Wizard Posts: 1,613 Karma: 6718541 Join Date: Dec 2004 Location: Paradise (Key West, FL) Device: Current:Surface Go & Kindle 3 - Retired: DellV8p, Clie UX50, ...	I just installed the new v2.55 on both my Win10 desktop box and my Win8.1 tablet. The new shutdown message looks good. Its a nice fix, thanks Kovid.

04-15-2016, 02:43 PM	#14
MerlinMama Evangelist Posts: 498 Karma: 32554 Join Date: May 2014 Location: Canada Device: Kobo Sage	Yes, I really like the overlay better.

04-15-2016, 10:12 PM	#15
kovidgoyal creator of calibre Posts: 45,604 Karma: 28548974 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Glad to hear it