Nonvnc and Opensource to Use DX(G) as a PC Display - Page 5

knc1 · 09-18-2015, 12:13 PM

Quote:

Originally Posted by idoit

Obviously, I have tried it with both KUAL extension and Launchpad. I think that's irrelevant. Now, the point that knc1 and NiLuJe arise might affect regarding kernel. My point is, even if that's true, it is a weakness, not be able to run on all DX(G)'s let alone other Kindles. We should work towards making it available for more variations. So, did mylcd 1.0 have less complications and therefore less issues of this sort?

One thing is that the Windows version at least did work... The Linux version doesn't work.

Also, KUAL is keyboard-less...

Ah, no - that is not intended, that is a trouble report.

KUAL was designed, tested and has been used on all models other that the K1.
(The K1 is not supported, everything else is.)

thatworkshop · 09-18-2015, 12:20 PM

Quote:

Originally Posted by knc1

Ah, no - that is not intended, that is a trouble report.

KUAL was designed, tested and has been used on all models other that the K1.
(The K1 is not supported, everything else is.)

Sorry, by keyboard-less, I meant

Spoiler:

I meant ... I am an idiot!

NiLuJe · 09-18-2015, 02:35 PM

:?

thatworkshop · 09-18-2015, 06:55 PM

Quote:

Originally Posted by NiLuJe

:?

Oops...
Thanks NiLuJe. My bad.

Thanks both you and knc1, you two caught me right on the spot

back to mylcd issue, it's not KUAL/LP issue, it might be rooted at mylcd itself / kernel etc.

knc1 · 09-18-2015, 09:15 PM

Or toolchain used,
Or your specific device.

I mention that it may be local to your device, because you also posted that the set of modules we (twobob and I) built for the DXG did not work on your device.

But I see that twobob did test them on his DXG (I didn't have one at the time):
https://www.mobileread.com/forums/sho...d.php?t=206188

The modules specific to your DXG are attached at this post:
https://www.mobileread.com/forums/sho...5&postcount=90

nahte · 09-21-2015, 03:15 AM

Quote:

Originally Posted by idoit

Oops...
back to mylcd issue, it's not KUAL/LP issue, it might be rooted at mylcd itself / kernel etc.

NOT connect usb, "boot dxg, landscape dxg, launchpad with I (press dxg's up key then i key to input I)", see if dxg will reboot? If still rebooting, change i.sh to "dmesg > d.log; insmod g_android.ko", and post the log and let me see what is the problem of the ko.

knc1 · 09-21-2015, 04:39 AM

Quote:

Originally Posted by nahte

NOT connect usb, "boot dxg, landscape dxg, launchpad with I (press dxg's up key then i key to input I)", see if dxg will reboot? If still rebooting, change i.sh to "dmesg > d.log; insmod g_android.ko", and post the log and let me see what is the problem of the ko.

And perhaps try it without that custom contrast module loaded.

thatworkshop · 09-22-2015, 11:38 PM

Quote:

Originally Posted by nahte

NOT connect usb, "boot dxg, landscape dxg, launchpad with I (press dxg's up key then i key to input I)", see if dxg will reboot? If still rebooting, change i.sh to "dmesg > d.log; insmod g_android.ko", and post the log and let me see what is the problem of the ko.

Tried it once again to no avail. For me having contrast module is priority and a necessity and as knc1 said, it seems mylcd has conflict with it... As a side effect of running i.sh, obviously USBnet gets disabled, and even connecting USB cable to DXG doesn't make LED lit anymore till I restart.

Unfortunately, for the next 2-3 weeks, I'm bound to Windows, so can't further do testing in Linux.

As it stands, for now, mylcd v2.0 has a few drawbacks/requirements that takes too much away from my experience.

thatworkshop · 10-08-2015, 09:41 AM

Well, as a quick update, it seems there is a conflict between contrast and mylcd2. At least for now, I have to abandon using mylcd2 as contrast has priority for me.

nahte · 11-23-2015, 09:50 PM

https://github.com/nahtethan/dxg-dis...r/IMG_3664.JPG
https://github.com/nahtethan/dxg-dis...r/IMG_3665.JPG

Some demo images.

nahte · 12-01-2016, 02:22 AM

https://github.com/nahtethan/dxg-dis...b/local/DXG.md

09-18-2015, 09:15 PM	#65
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Or toolchain used, Or your specific device. I mention that it may be local to your device, because you also posted that the set of modules we (twobob and I) built for the DXG did not work on your device. But I see that twobob did test them on his DXG (I didn't have one at the time): https://www.mobileread.com/forums/sho...d.php?t=206188 The modules specific to your DXG are attached at this post: https://www.mobileread.com/forums/sho...5&postcount=90 Last edited by knc1; 09-18-2015 at 09:20 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Howto recompile opensource firmware for KOBO reader	fastrobot	Kobo Developer's Corner	41	06-24-2015 11:47 PM
Iriver Story firmware to go opensource	greenapple	iRiver Story	7	05-22-2013 04:05 AM
opensource jetbook??	read365	Ectaco jetBook	2	12-13-2011 07:56 PM
Firmware als OpenSource Projekt?	thoschi	PocketBook	13	02-04-2011 01:38 AM
Sony and opensource codes.	ProDigit	Sony Reader	3	10-28-2008 02:04 PM

09-18-2015, 02:35 PM	#63
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	:?

10-08-2015, 09:41 AM	#69
thatworkshop hub Posts: 715 Karma: 2151032 Join Date: Jan 2012 Location: Iranian in Canada Device: K3G, DXG, Kobo mini	Well, as a quick update, it seems there is a conflict between contrast and mylcd2. At least for now, I have to abandon using mylcd2 as contrast has priority for me.

11-23-2015, 09:50 PM	#70
nahte Enthusiast Posts: 28 Karma: 12 Join Date: Aug 2015 Device: none	https://github.com/nahtethan/dxg-dis...r/IMG_3664.JPG https://github.com/nahtethan/dxg-dis...r/IMG_3665.JPG Some demo images.

12-01-2016, 02:22 AM	#71
nahte Enthusiast Posts: 28 Karma: 12 Join Date: Aug 2015 Device: none	https://github.com/nahtethan/dxg-dis...b/local/DXG.md