Newbie to PW2, few questions

Ripplinger · 11-17-2014, 01:46 AM

I couldn't resist the $79 for a refurbished PW2 offer, and even though I can't see myself using it that often, I can take advantage of rental books through Prime, so that alone will more than pay for it. And it never hurts to have another toy! But there's a few things I'd really like changed on it.

1. Adding my own fonts. The fonts on it are just too thin and there doesn't seem to be a way to darken them or make them bolder unless you add your own fonts. I have to say this is the biggest disappointment on the reader. The easy trick using the USE_ALT_FONTS file and adding them doesn't work on a PW2, so is the only way to do it by jailbreaking the reader? I upgraded to 5.6.1 and from what I've read so far it seems most likely that I should downgrade back to 5.4 and use the present methods of jailbreaking to add my own fonts? Is there one post that has all the information on doing it all, jailbreaking and adding the fonts? This is the biggest issue for me to comfortably read the free books.

2. Is there a metadata plugboard setup that will rename the books to show Title [#] Series?

3. I'd like to be able to have Calibre sort books into the Collections I set when I send them to the device automatically, the same as it works for Sony and Kobo readers. Is that possible without too much trouble or having to repeat it each firmware upgrade? The hacks for the Kindle seems far more involved (and risky) than what is needed for Sony or Kobo readers.

4. Is there a way to have the cover of the book you're reading display while the reader is asleep?

#1 really is the most important one for me, and as long as Calibre can rename the books to include the series info, the last 2 would be nice but I could live without them.

knc1 · 11-17-2014, 04:07 AM

Quote:

Originally Posted by Ripplinger

- - - -
I upgraded to 5.6.1 and from what I've read so far it seems most likely that I should downgrade back to 5.4 . . . .
- - - -

You can try to downgrade, do not expect it will work -
(5.6.x series has the "Downgrade Attack" (lab126's phrase) protection included).

If you can't downgrade (there isn't any JB for 5.6.anything) then -
Live with it -
or
Return it -
or
Add a serial port adapter to the operator's console.

Ripplinger · 11-17-2014, 05:09 AM

There's no way to do a factory reset on a Kindle that will put it back at the firmware it was shipped with? I haven't installed any hacks at all, no jailbreaks, nothing but upgraded the stock firmware.

HarryT · 11-17-2014, 05:23 AM

A factory reset has no effect whatsoever on the firmware. It just deletes user data.

knc1 · 11-17-2014, 05:52 AM

For others who are considering stepping into this mine field:
https://www.mobileread.com/forums/sho...81&postcount=6

HarryT · 11-17-2014, 05:54 AM

Personally, I think that the 5.6.1 firmware version is a huge step forward, particularly for people who use collections. It makes significant - and extremely sensible - changes to the way that Cloud Collections work, so if installing patches, hacks, etc, is of no concern to you (and I have no interest whatsoever in doing so!), it's a very worthwhile upgrade to install.

bchaplin · 11-17-2014, 07:48 AM

Hi! Where did you get the refurbished PW2? I looked for this yesterday to see if it was an option and somehow couldn't find them.

(I purchased a refurbished PW1 some time ago and it has been great.)

knc1 · 11-17-2014, 08:42 AM

Quote:

Originally Posted by bchaplin

Hi! Where did you get the refurbished PW2? I looked for this yesterday to see if it was an option and somehow couldn't find them.

(I purchased a refurbished PW1 some time ago and it has been great.)

How many do you want? PM me.

knc1 · 11-17-2014, 09:00 AM

Quote:

Originally Posted by HarryT

Personally, I think that the 5.6.1 firmware version is a huge step forward, particularly for people who use collections. It makes significant - and extremely sensible - changes to the way that Cloud Collections work, so if installing patches, hacks, etc, is of no concern to you (and I have no interest whatsoever in doing so!), it's a very worthwhile upgrade to install.

You can do that sort of thing with a Kindle?

I thought they where just hardware kits without any use other than to be taken apart.

- - - - -

My new KT2 shipped with 5.6.1 - -
I only turned it on long enough to be sure it wasn't DOA before I took it apart. So I really can't say if 5.6.1 has any redeeming features or not.

Oh, I did notice the change in the "Hold power button >20 seconds" behavior.
And that it is an IR scanner like the original KT, not a capacitive touch screen like the other two 2014 models.

Internally, the KT2 is much more like the K4 (which it replaced in the product line-up) than the KT.

booklover6 · 11-17-2014, 09:28 AM

Quote:

Originally Posted by Ripplinger

1. Adding my own fonts. This is the biggest issue for me to comfortably read the free books..

You can embed your font for books that you side load. Won't help with the once a month free Prime books, though.

Quote:

Originally Posted by Ripplinger

2. Is there a metadata plugboard setup that will rename the books to show Title [#] Series?.

Yes there is. For side loaded books.

Quote:

Originally Posted by Ripplinger

3. I'd like to be able to have Calibre sort books into the Collections I set when I send them to the device automatically, the same as it works for Sony and Kobo readers.

There is a JB hack but it will never be as simple and easy as it is for Sony or Kobo readers.

Quote:

Originally Posted by Ripplinger

4. Is there a way to have the cover of the book you're reading display while the reader is asleep?.

requires an ad free device and jailbreak.

Quote:

Originally Posted by Ripplinger

#1 really is the most important one for me, and as long as Calibre can rename the books to include the series info, the last 2 would be nice but I could live without them.

See knc1's response about JB. (i.e. you're screwed)

knc1 · 11-17-2014, 11:18 AM

Quote:

Originally Posted by HarryT

Personally, I think that the 5.6.1 firmware version is a huge step forward, particularly for people who use collections. It makes significant - and extremely sensible - changes to the way that Cloud Collections work, so if installing patches, hacks, etc, is of no concern to you (and I have no interest whatsoever in doing so!), it's a very worthwhile upgrade to install.

I added the: "HarryT Exception" to the overview on upgrading PW2 devices.

pghaworth · 11-17-2014, 11:21 AM

Quote:

Originally Posted by knc1

You can do that sort of thing with a Kindle?

I thought they where just hardware kits without any use other than to be taken apart.

pghaworth · 11-17-2014, 11:24 AM

Quote:

Originally Posted by Ripplinger

I upgraded to 5.6.1 and from what I've read so far it seems most likely that I should downgrade back to 5.4 and use the present methods of jailbreaking to add my own fonts?

I can personally attest that at present downgrading is not doable from 5.6.1.

Ripplinger · 11-17-2014, 02:08 PM

Quote:

Originally Posted by HarryT

Personally, I think that the 5.6.1 firmware version is a huge step forward, particularly for people who use collections. It makes significant - and extremely sensible - changes to the way that Cloud Collections work, so if installing patches, hacks, etc, is of no concern to you (and I have no interest whatsoever in doing so!), it's a very worthwhile upgrade to install.

I sideload all of my books, so I wouldn't really be making use of the new Cloud Collections.

Quote:

Originally Posted by bchaplin

Hi! Where did you get the refurbished PW2? I looked for this yesterday to see if it was an option and somehow couldn't find them.

(I purchased a refurbished PW1 some time ago and it has been great.)

They had special pricing on it, I got a notice in an email from Amazon, I think one of their Gold Deals for the day. It said a 2-3 week expected delivery date, but it came in only 6 days (and a Sunday delivery!), I was a bit surprised. It can still be purchased here but for $20 higher:
http://www.amazon.com/Certified-Refu.../dp/B00CTTJRTU

As I said, I can't ever see me using it as a main reader, especially having capacitive touch, and with the thinner fonts. Embedding fonts in every ebook is something I really don't want to bother with. But for $79, it's probably worth it just to experiment on. I'll have to think about it this week and decide if I keep it or not.

Thanks for all the help. I could kick myself for doing the upgrade though.

pghaworth · 11-17-2014, 02:33 PM

"I could kick myself for doing the upgrade though."

I completely understand.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some questions before I buy PW2...	doremifaso	Amazon Kindle	7	10-11-2013 03:21 PM
Newbie PW questions	Robmonster	Amazon Kindle	7	11-07-2012 11:26 PM
Classic Newbie questions	druzyek	Barnes & Noble NOOK	6	06-13-2010 02:37 AM
Newbie Questions	dar72	Workshop	2	03-03-2010 12:52 PM
newbie questions...	Brandobras	Calibre	2	01-29-2010 07:33 AM

11-17-2014, 01:46 AM	#1
Ripplinger 350 Hoarder Posts: 3,587 Karma: 8281267 Join Date: Dec 2010 Location: Midwest USA Device: Sony PRS-350, Kobo Glo & Glo HD, PW2	Newbie to PW2, few questions I couldn't resist the $79 for a refurbished PW2 offer, and even though I can't see myself using it that often, I can take advantage of rental books through Prime, so that alone will more than pay for it. And it never hurts to have another toy! But there's a few things I'd really like changed on it. 1. Adding my own fonts. The fonts on it are just too thin and there doesn't seem to be a way to darken them or make them bolder unless you add your own fonts. I have to say this is the biggest disappointment on the reader. The easy trick using the USE_ALT_FONTS file and adding them doesn't work on a PW2, so is the only way to do it by jailbreaking the reader? I upgraded to 5.6.1 and from what I've read so far it seems most likely that I should downgrade back to 5.4 and use the present methods of jailbreaking to add my own fonts? Is there one post that has all the information on doing it all, jailbreaking and adding the fonts? This is the biggest issue for me to comfortably read the free books. 2. Is there a metadata plugboard setup that will rename the books to show Title [#] Series? 3. I'd like to be able to have Calibre sort books into the Collections I set when I send them to the device automatically, the same as it works for Sony and Kobo readers. Is that possible without too much trouble or having to repeat it each firmware upgrade? The hacks for the Kindle seems far more involved (and risky) than what is needed for Sony or Kobo readers. 4. Is there a way to have the cover of the book you're reading display while the reader is asleep? #1 really is the most important one for me, and as long as Calibre can rename the books to include the series info, the last 2 would be nice but I could live without them.

11-17-2014, 05:09 AM	#3
Ripplinger 350 Hoarder Posts: 3,587 Karma: 8281267 Join Date: Dec 2010 Location: Midwest USA Device: Sony PRS-350, Kobo Glo & Glo HD, PW2	There's no way to do a factory reset on a Kindle that will put it back at the firmware it was shipped with? I haven't installed any hacks at all, no jailbreaks, nothing but upgraded the stock firmware.

11-17-2014, 05:23 AM	#4
HarryT eBook Enthusiast Posts: 85,560 Karma: 93980341 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	A factory reset has no effect whatsoever on the firmware. It just deletes user data.

11-17-2014, 05:52 AM	#5
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	For others who are considering stepping into this mine field: https://www.mobileread.com/forums/sho...81&postcount=6

11-17-2014, 05:54 AM	#6
HarryT eBook Enthusiast Posts: 85,560 Karma: 93980341 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	Personally, I think that the 5.6.1 firmware version is a huge step forward, particularly for people who use collections. It makes significant - and extremely sensible - changes to the way that Cloud Collections work, so if installing patches, hacks, etc, is of no concern to you (and I have no interest whatsoever in doing so!), it's a very worthwhile upgrade to install.

11-17-2014, 07:48 AM	#7
bchaplin Enthusiast Posts: 30 Karma: 350010 Join Date: Oct 2009 Location: Boston, MA Device: iPhone, K3 (Kindle Keyboard)	Hi! Where did you get the refurbished PW2? I looked for this yesterday to see if it was an option and somehow couldn't find them. (I purchased a refurbished PW1 some time ago and it has been great.)

11-17-2014, 02:33 PM	#15
pghaworth Fervent Pleasure Seeker Posts: 1,224 Karma: 712073 Join Date: Feb 2009 Location: The Windmills of My Mind Device: Clara HD	"I could kick myself for doing the upgrade though." I completely understand.

Advert

Advert