setup development environment - Page 2

JeffElkins · 10-22-2008, 03:10 PM

Quote:

Originally Posted by kovidgoyal

looking at my setup (which is probably out of sync with the downloadable one), it's

Code:

/etc/init.d/net.eth2 start

Not working, sorry.

It (net.eth2) didn't exist, so I created it (symlink to net.lo, like net.eth0 and net.eth1) but it failed with 'no such device' as did net.eth0 and net.eth1.

kovidgoyal · 10-22-2008, 03:16 PM

I assume you have an enabled ethernet bridged device in your vm settings for this VM?

JeffElkins · 10-22-2008, 03:35 PM

Quote:

Originally Posted by kovidgoyal

I assume you have an enabled ethernet bridged device in your vm settings for this VM?

Yep. That was the first thing I checked.

kovidgoyal · 10-22-2008, 03:51 PM

What does lspci | grep Eth give you (as root)

EDIT and while you're about it

dmesg | grep -i eth as well

JeffElkins · 10-22-2008, 04:05 PM

Quote:

Originally Posted by kovidgoyal

What does lspci | grep Eth give you (as root)

It shows a 79c970 AMD adapter (PCNet32 Lance). I also did a modprobe on the vm* modules in the misc directory. All loaded, but still a big fail on bringing up an eth interface. Sorry I don't know gentoo, I'm debian/ubuntu/(years past):slackware.

kovidgoyal · 10-22-2008, 04:19 PM

dmesg | grep -i eth

JeffElkins · 10-22-2008, 04:25 PM

Quote:

Originally Posted by kovidgoyal

dmesg | grep -i eth

Fixed. For some reason, eth0 was renamed eth4 by udev ???

Anyway, I created net.eth4 and have a network connection

10-22-2008, 03:51 PM	#19
kovidgoyal creator of calibre Posts: 45,616 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	What does lspci \| grep Eth give you (as root) EDIT and while you're about it dmesg \| grep -i eth as well Last edited by kovidgoyal; 10-22-2008 at 04:01 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with FBReader setup	Big Kev	Reading and Management	9	10-08-2010 11:33 AM
calibre VMWare development environment	kovidgoyal	Calibre	30	12-30-2009 01:43 PM
Setting up Mac Calibre development environment?	pdurrant	Calibre	2	01-06-2009 08:10 AM
Setting up development environment	tompe	OpenInkpot	9	08-27-2008 03:26 PM
PRS-500 My setup	Nogg	Sony Reader Dev Corner	12	08-22-2007 02:30 PM

10-22-2008, 03:16 PM	#17
kovidgoyal creator of calibre Posts: 45,616 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	I assume you have an enabled ethernet bridged device in your vm settings for this VM?

10-22-2008, 04:19 PM	#21
kovidgoyal creator of calibre Posts: 45,616 Karma: 28549044 Join Date: Oct 2006 Location: Mumbai, India Device: Various	dmesg \| grep -i eth