Help! Please! K4 dead after enable USB network

veason · 11-02-2013, 10:35 AM

Hi everyone.

After I jailbreak with "kindle-jailbreak-k4-1.6.N".and update with "kindle-usbnetwork-0.43.N.zip". Trying to enable the usbnet. change the "DISABLED_auto" file to "auto". And also went to "etc", using txt to change "config" ，change K3_WIFI="false" and K3_WIFI_SSHD_ONLY="false" to K3_WIFI="ture" and K3_WIFI_SSHD_ONLY="ture". Then saved the file and restarted.

But,after restart, kindle shows usb drive mode with or without cable connect to pc.

And also, in the pc network connection setting, an additional connection was shown. shows detail as "USB ethernet/RNDIS Gadget"

Basicly, Im stuck in here. Try to restart kindle or try to using "magic key". But wouldn't help.(maybe i didnt do in a right way?)

Can anyone told me what to do to get back my kindle? Will really appreciate it!

Thanks in advance!

ixtab · 11-02-2013, 10:44 AM

Kubrick.

PS: This is a K4, not a K5.

NiLuJe · 11-02-2013, 12:08 PM

Don't boot a Kindle while plugged to something, it confuses volumd.

If this still happens without anything plugged, you might have tweaked something else in the config (USE_VOLUMD), which is also a very bad idea on a K4. [Incidentally, if you don't know what you're doing, err don't, but, barring that, use the KUAL extension, it at least prevents you from shooting your own foot with some settings combinations...].

Also, read the docs, because if you were trying to enable USBnetwork, and then are wondering why you see a Linux Ethernet gadget network interface, then you obviously missed the point

.

veason · 11-02-2013, 07:29 PM

Quote:

Originally Posted by ixtab

Kubrick.

PS: This is a K4, not a K5.

Thanks! problem solved! Really appreciate it.

However, raise another question.

After debrick, trying to put "ENABLE_DIAGS" and disable diagnostics in the diagnostics mode. Shown like this:

pcbID does not match with DSN

pcbID:
XXXXXXXXXXX

DSN:
YYYYYYYYYYY

Any possible to solve this one?

Thanks again!

veason · 11-02-2013, 07:34 PM

I do forgot to unplug cable after change the "config" file. I think this is the reason why it stuck at the usb network.

However, the problem solved after the Kubrick procedure. Thats a really cool thing. Thanks to ixtab.

11-02-2013, 10:35 AM	#1
veason Junior Member Posts: 4 Karma: 2000 Join Date: Nov 2013 Device: K3W/K4	Help! Please! K4 dead after enable USB network Hi everyone. After I jailbreak with "kindle-jailbreak-k4-1.6.N".and update with "kindle-usbnetwork-0.43.N.zip". Trying to enable the usbnet. change the "DISABLED_auto" file to "auto". And also went to "etc", using txt to change "config" ，change K3_WIFI="false" and K3_WIFI_SSHD_ONLY="false" to K3_WIFI="ture" and K3_WIFI_SSHD_ONLY="ture". Then saved the file and restarted. But,after restart, kindle shows usb drive mode with or without cable connect to pc. And also, in the pc network connection setting, an additional connection was shown. shows detail as "USB ethernet/RNDIS Gadget" Basicly, Im stuck in here. Try to restart kindle or try to using "magic key". But wouldn't help.(maybe i didnt do in a right way?) Can anyone told me what to do to get back my kindle? Will really appreciate it! Thanks in advance! Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How do I enable usb networking?	wallacemckart	Kindle Developer's Corner	15	11-01-2013 06:38 AM
[HELP] Cannot usb network kindle 2	Terra_Byte	Kindle Developer's Corner	16	10-05-2013 10:36 AM
USB Network help?	XxKryoxX	Kindle Developer's Corner	6	12-31-2012 08:47 AM
USB Debugging...enable or not?	da2zoe	Nook Developer's Corner	5	03-25-2012 02:15 PM
Enable USB Debugging after AVG anti-virus	nestlem3	Nook Developer's Corner	3	12-30-2010 04:03 PM

11-02-2013, 10:44 AM	#2
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	Kubrick. PS: This is a K4, not a K5.

11-02-2013, 12:08 PM	#3
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Don't boot a Kindle while plugged to something, it confuses volumd. If this still happens without anything plugged, you might have tweaked something else in the config (USE_VOLUMD), which is also a very bad idea on a K4. [Incidentally, if you don't know what you're doing, err don't, but, barring that, use the KUAL extension, it at least prevents you from shooting your own foot with some settings combinations...]. Also, read the docs, because if you were trying to enable USBnetwork, and then are wondering why you see a Linux Ethernet gadget network interface, then you obviously missed the point .

11-02-2013, 07:34 PM	#5
veason Junior Member Posts: 4 Karma: 2000 Join Date: Nov 2013 Device: K3W/K4	I do forgot to unplug cable after change the "config" file. I think this is the reason why it stuck at the usb network. However, the problem solved after the Kubrick procedure. Thats a really cool thing. Thanks to ixtab.

Advert

Advert