Autoeject on getting Calibre list of books

RotAnal · 09-13-2013, 01:21 PM

Dear Sirs,
I have noticed that after connecting the M92 Boox device to Calibre, while run "getting list of books on device" background job, M92 invariably disconnects (somewhat like autoeject) after about 5 min as read in the job running time. Of course I get error (at about 50% job completion

) and this prevents any sync and useful work. Moreover, in order to get device connected one more time, I have to turn the device off and on again, which is rather annoying.
Finally, I noticed that that "timeout" does not depend on Power Manager settings and it has something to do with file transfers, because w/o Calibre, M92 keeps tight to my notebook, while whenever I look in the M92 SD card, I soon get device disconnection.

Any suggestion? Is there any setting to be changed by me?
Thanks so much for your possible help.

davidjoseph1 · 09-13-2013, 08:24 PM

I had this problem briefly. It went away when I switched USB cables.

RotAnal · 09-14-2013, 04:19 AM

Quote:

Originally Posted by davidjoseph1

I had this problem briefly. It went away when I switched USB cables.

I used the original cable and, furthermore, I tried different cables with no success

IMHO, it's a sw, not hw trouble.

RotAnal · 09-26-2013, 06:12 AM

Quote:

Originally Posted by RotAnal

IMHO, it's a sw, not hw trouble.

I was wrong, I discovered that he trouble was actually ascribed to my faulty auxiliary SDHC card, which got some physical errors (however, I wonder WHAT brought about failure, since the card was purchased six months ago and only used together with Boox). I replaced the card and everything went fine.
Thanks anyway for the support
Maurizio Ciofalo

09-13-2013, 01:21 PM	#1
RotAnal Connoisseur Posts: 87 Karma: 1234 Join Date: Sep 2012 Device: Onyx Boox M92	Autoeject on getting Calibre list of books Dear Sirs, I have noticed that after connecting the M92 Boox device to Calibre, while run "getting list of books on device" background job, M92 invariably disconnects (somewhat like autoeject) after about 5 min as read in the job running time. Of course I get error (at about 50% job completion ) and this prevents any sync and useful work. Moreover, in order to get device connected one more time, I have to turn the device off and on again, which is rather annoying. Finally, I noticed that that "timeout" does not depend on Power Manager settings and it has something to do with file transfers, because w/o Calibre, M92 keeps tight to my notebook, while whenever I look in the M92 SD card, I soon get device disconnection. Any suggestion? Is there any setting to be changed by me? Thanks so much for your possible help.

09-13-2013, 08:24 PM	#2
davidjoseph1 Connoisseur Posts: 56 Karma: 130472 Join Date: May 2011 Device: BooxM90,M92*3,M96,N96, I86ml,C67ml,Kepler, Poke2,Nova3,MaxLumi2,TabUPC	I had this problem briefly. It went away when I switched USB cables.