BUG report(s) PDF Reader v2013.01.02 - Page 3

Mono · 03-26-2013, 04:21 PM

Yes, someone made a "research" on the topic of response time of annotation and type/compexity of pdf and number of annotations. It was more than a half year ago... There is a thread about the results.

Defenderland · 03-27-2013, 12:50 PM

Danel,
yes I have this problem, too. Certain pages are displayed much slower (no annotations).

mit1987 · 03-28-2013, 02:56 PM

Hey, booxtor, there is big bug with my M92 after installing the latest firmware.
It is:
First, I wrote a comment on the PDF, then I switch to the next page.
However, in this case, my M92 cant move to the next page.
If I want to move to the next page, i must canclle the "comment model", then push "next page". In this case, it works. I did not understand why..

Randy11 · 03-29-2013, 09:16 AM

Mit1987, have you put the 2 patchs for the PDF reader ?

Defenderland · 05-29-2013, 10:00 AM

Booxtor,
do you have any infos on the status of the jump-to-page-1-bug?
(explained in detail here: https://www.mobileread.com/forums/sho...3&postcount=16)

Booxtor · 05-29-2013, 11:50 AM

Quote:

Originally Posted by Defenderland

Booxtor,
do you have any infos on the status of the jump-to-page-1-bug?
(explained in detail here: https://www.mobileread.com/forums/sho...3&postcount=16)

Hi,
I have tried the steps in the bug description on some PDFs and couldn't replicate the behaviour you describe. It worked just as it had to.

Defenderland · 05-29-2013, 06:42 PM

Hi,
did you follow the detailed 2nd description, or the one in the first post?

This procedure should replicate the bug:

1. Open PDF
2. Go to PAGE SETTINGS -> set a "Universal Manual" margin
3. Go to READING -> choose a SELECTION ZOOM (I don't know, if it works with all zoom settings, but i tested it with two and three column PDFs)
4. Go to READING -> Switch to PAPER MODE
5. Now, when turning to the previous page, the reader jumps to the first page of the PDF.

Booxtor · 05-30-2013, 09:27 AM

Quote:

Originally Posted by Defenderland

Hi,
did you follow the detailed 2nd description, or the one in the first post?

This procedure should replicate the bug:

1. Open PDF
2. Go to PAGE SETTINGS -> set a "Universal Manual" margin
3. Go to READING -> choose a SELECTION ZOOM (I don't know, if it works with all zoom settings, but i tested it with two and three column PDFs)
4. Go to READING -> Switch to PAPER MODE
5. Now, when turning to the previous page, the reader jumps to the first page of the PDF.

Yes, I did exactly those steps. I've tried out several PDFs and could not replicate the bug

Randy11 · 05-30-2013, 10:14 AM

Hello Booxtor,

I've already confirmed this bug : Bug 1.8 (1.8.20121113) + PDFReader_Patch 2013.01.02 : Go back to page 1

But, I haven't make test with the new firmware.

I'm going to check this quickly.

Defenderland · 05-30-2013, 10:26 AM

That's strange.
Did you really switch to the previous PAGE NUMBER of the PDF, not only the previous page of the cropped-screen?

Here's a PDF for download, where it occurs on my unit:
https://dl.dropboxusercontent.com/u/...201005_phd.pdf

Randy11 · 05-30-2013, 04:50 PM

Quote:

Originally Posted by Randy11

Hello Booxtor,

I've already confirmed this bug : Bug 1.8 (1.8.20121113) + PDFReader_Patch 2013.01.02 : Go back to page 1

But, I haven't make test with the new firmware.

I'm going to check this quickly.

It's seems that the problem is gone ... ???

Defenderland · 05-31-2013, 08:51 AM

I have the latest 1.8 20130425 Firmware.

Randy,
could you please try it with the PDF I uploaded?

Randy11 · 05-31-2013, 09:05 AM

Defenderland, do you change the page with the buttons or the pad ?

Booxtor · 05-31-2013, 12:13 PM

Quote:

Originally Posted by Defenderland

I have the latest 1.8 20130425 Firmware.

Randy,
could you please try it with the PDF I uploaded?

I can confirm this behavior with you PDF. The problem has been reported. Hope I can provide fix after weekend

Kirith · 05-31-2013, 03:06 PM

Maybe this bug has already been reported ... then repeat
There is a file . If you attempt to use a dictionary an error occurs: whole frames are allocated (a combination of words, sentences). Sometimes you can pick out one word - then the transfer is possible.
In the "old" PDF-reader have the opportunity to select a part of a word to translate in alpha. You can add this feature to the new PDF-reader or some other way to solve the problem?

Может об этой ошибке уже сообщали... тогда повторюсь
Есть файл. При попытке пользоваться словарём возникает ошибка: выделяются целые фреймы (сочетания слов, предложения). Иногда можно выделить и одно слово - тогда перевод возможен.
В "старом" PDF-ридере есть возможность выделить часть слова для перевода по-буквенно. Можно добавить эту возможность в новый PDF-ридер или как-то иначе решить проблему?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bug report	mtravellerh	PocketBook	303	11-03-2013 08:21 PM
How to report a bug???	tmlee51	Calibre	2	02-15-2012 12:07 AM
Can't get bug report to work	AlexBell	Conversion	6	09-14-2011 05:49 AM
'Bug' Report - E-Reader issue	MildBill	Calibre	7	05-05-2011 05:21 PM

03-26-2013, 04:21 PM	#31
Mono Mono Posts: 699 Karma: 13333 Join Date: Jan 2012 Device: Boox M92	Yes, someone made a "research" on the topic of response time of annotation and type/compexity of pdf and number of annotations. It was more than a half year ago... There is a thread about the results.

03-27-2013, 12:50 PM	#32
Defenderland Groupie Posts: 181 Karma: 208 Join Date: Feb 2012 Device: Colorsoft, PW	Danel, yes I have this problem, too. Certain pages are displayed much slower (no annotations).

03-28-2013, 02:56 PM	#33
mit1987 Junior Member Posts: 8 Karma: 10 Join Date: Nov 2012 Device: Boox M92	Hey, booxtor, there is big bug with my M92 after installing the latest firmware. It is: First, I wrote a comment on the PDF, then I switch to the next page. However, in this case, my M92 cant move to the next page. If I want to move to the next page, i must canclle the "comment model", then push "next page". In this case, it works. I did not understand why..

03-29-2013, 09:16 AM	#34
Randy11 Wizard Posts: 1,138 Karma: 1577094 Join Date: Oct 2008 Device: Samsung EB60, Onyx M92, Onyx Max2	Mit1987, have you put the 2 patchs for the PDF reader ?

05-29-2013, 10:00 AM	#35
Defenderland Groupie Posts: 181 Karma: 208 Join Date: Feb 2012 Device: Colorsoft, PW	Booxtor, do you have any infos on the status of the jump-to-page-1-bug? (explained in detail here: https://www.mobileread.com/forums/sho...3&postcount=16)

05-29-2013, 06:42 PM	#37
Defenderland Groupie Posts: 181 Karma: 208 Join Date: Feb 2012 Device: Colorsoft, PW	Hi, did you follow the detailed 2nd description, or the one in the first post? This procedure should replicate the bug: 1. Open PDF 2. Go to PAGE SETTINGS -> set a "Universal Manual" margin 3. Go to READING -> choose a SELECTION ZOOM (I don't know, if it works with all zoom settings, but i tested it with two and three column PDFs) 4. Go to READING -> Switch to PAPER MODE 5. Now, when turning to the previous page, the reader jumps to the first page of the PDF.

05-30-2013, 10:14 AM	#39
Randy11 Wizard Posts: 1,138 Karma: 1577094 Join Date: Oct 2008 Device: Samsung EB60, Onyx M92, Onyx Max2	Hello Booxtor, I've already confirmed this bug : Bug 1.8 (1.8.20121113) + PDFReader_Patch 2013.01.02 : Go back to page 1 But, I haven't make test with the new firmware. I'm going to check this quickly.

05-30-2013, 10:26 AM	#40
Defenderland Groupie Posts: 181 Karma: 208 Join Date: Feb 2012 Device: Colorsoft, PW	That's strange. Did you really switch to the previous PAGE NUMBER of the PDF, not only the previous page of the cropped-screen? Here's a PDF for download, where it occurs on my unit: https://dl.dropboxusercontent.com/u/...201005_phd.pdf

05-31-2013, 08:51 AM	#42
Defenderland Groupie Posts: 181 Karma: 208 Join Date: Feb 2012 Device: Colorsoft, PW	I have the latest 1.8 20130425 Firmware. Randy, could you please try it with the PDF I uploaded?

05-31-2013, 09:05 AM	#43
Randy11 Wizard Posts: 1,138 Karma: 1577094 Join Date: Oct 2008 Device: Samsung EB60, Onyx M92, Onyx Max2	Defenderland, do you change the page with the buttons or the pad ?

05-31-2013, 03:06 PM	#45
Kirith schoolteacher Posts: 137 Karma: 16342 Join Date: May 2012 Location: Russia Device: Onyx M92 +i62HD(m)+M92(m)x20+M90x13	Maybe this bug has already been reported ... then repeat There is a file . If you attempt to use a dictionary an error occurs: whole frames are allocated (a combination of words, sentences). Sometimes you can pick out one word - then the transfer is possible. In the "old" PDF-reader have the opportunity to select a part of a word to translate in alpha. You can add this feature to the new PDF-reader or some other way to solve the problem? Может об этой ошибке уже сообщали... тогда повторюсь Есть файл. При попытке пользоваться словарём возникает ошибка: выделяются целые фреймы (сочетания слов, предложения). Иногда можно выделить и одно слово - тогда перевод возможен. В "старом" PDF-ридере есть возможность выделить часть слова для перевода по-буквенно. Можно добавить эту возможность в новый PDF-ридер или как-то иначе решить проблему?