List of books

Magic-Ian · 04-01-2013, 06:29 AM

When I connect my device to calibre it stats doing a check on all books on device. This can take over an hour. This is a bit of a pain when all I wish to do is convert one or two books and upload to device. Is there any way around this please?

kovidgoyal · 04-01-2013, 09:16 AM

right cilck on the device icon in calibre->configure this device->ignore most of the folders, thereby cutting down the scan time.

theducks · 04-01-2013, 09:21 AM

Quote:

Originally Posted by Magic-Ian

When I connect my device to calibre it stats doing a check on all books on device. This can take over an hour. This is a bit of a pain when all I wish to do is convert one or two books and upload to device. Is there any way around this please?

1) Let it complete, Fully (the task wheel stops).
2) DO NOT delete the 2 files Calibre leaves on your device (these are the a)the unique device ID to calibre. b)The list of books Calibre knows were there.
Calibre performs a quicker check on known books, saving quite a bit of time.

Depending on your device, there can be a 'Read Metadata from Files on Device' option to disable.

Magic-Ian · 04-14-2013, 06:17 AM

Thank you for the responce. I have not had a chance to try. I have just upgraded my PC and have had to do fresh installs. I now have a further problem in that I had my library backed up and after re-installation of Calibre I "added all the books. Now when I connect my reader (Kobo Arc) it starts to do a check but after 30/45 minutes Calibre closes (before finishing the check).

itimpi · 04-14-2013, 07:20 AM

Quote:

Originally Posted by Magic-Ian

Thank you for the responce. I have not had a chance to try. I have just upgraded my PC and have had to do fresh installs. I now have a further problem in that I had my library backed up and after re-installation of Calibre I "added all the books. Now when I connect my reader (Kobo Arc) it starts to do a check but after 30/45 minutes Calibre closes (before finishing the check).

You should not have had to repeat the 'Add" of books. Assuming you made the backup by copying your original Calibre library folder and all its contents, then you could have copied the backed up library folder onto the new machine and then after installing Calibre when it first starts up you could simply have pointed it at the location you have put the restored library.

Quite why you should be crashing I have no idea.

Magic-Ian · 04-16-2013, 07:12 AM

Things have now got worse. After trying several times to get Calibre to run, I did a complete re-install in the hopes that it would solve the problem. Now Calibre does not seem to recognise my reader is attached. I have a Kobo Arc, but not sure whether to connect as Kobo or Android. I have tried both but none seem to work. The Kobo is showing on the computer as a portable media device rather than an external drive. Not sure if this makes a difference.

mbovenka · 04-16-2013, 07:29 AM

Quote:

Originally Posted by Magic-Ian

The Kobo is showing on the computer as a portable media device rather than an external drive. Not sure if this makes a difference.

If you're running XP, it does; Calibre does not support MTP devices on XP. You can use 'Connect to Folder' in that case.

Magic-Ian · 04-19-2013, 05:25 AM

I am running windos 7. I am not able to connect to folder as the device (kobo Arc) does not show up in the drop down box. I can access it through "my computer". What seems strange is that when I first did the OS updat, Calibre DID connect to device, but it crashed every time it did a search on the device. Then I re-installed Calibre, in the hope that it would cure the problem and it is now that it does not "see" the device. I am trying to get info from the Kobo IT guys to see if I can get it to connect as an external drive rather than a portable media player.

DoctorOhh · 04-19-2013, 05:35 AM

Quote:

Originally Posted by Magic-Ian

Then I re-installed Calibre, in the hope that it would cure the problem and it is now that it does not "see" the device. I am trying to get info from the Kobo IT guys to see if I can get it to connect as an external drive rather than a portable media player.

If calibre is working fine other than this and since your tablet is a current version of Android, I would suggest you investigate the Calibre Companion app. This uses your local wifi connection to connect your tablet to calibre as a device. I use it on my Nexus 7 and couldn't be more satisfied.

theducks · 04-19-2013, 09:42 AM

Quote:

Originally Posted by Magic-Ian

I am running windos 7. I am not able to connect to folder as the device (kobo Arc) does not show up in the drop down box. I can access it through "my computer". What seems strange is that when I first did the OS updat, Calibre DID connect to device, but it crashed every time it did a search on the device. Then I re-installed Calibre, in the hope that it would cure the problem and it is now that it does not "see" the device. I am trying to get info from the Kobo IT guys to see if I can get it to connect as an external drive rather than a portable media player.

Is it possible that your Kobo got added to the MPT-Ignore list in Calibre? (Preferences:Sharing:Ignored devices)

Magic-Ian · 04-20-2013, 11:59 AM

It is not in the ignore list. I will try the Android app when I get back from a trip. It has got me thinking though. I changed the Android to jellybean(?) at about the same time as I started having problems.

Magic-Ian · 04-22-2013, 07:35 AM

Problem solved. I tried the Calibre companion and nearly gave up trying. Then today I recieved a new network hub as the one I had was allowing piggybacking due to a crossed line(?) (my providers IT words). As soon as I connected the new hub, I tried again. It worked first time and did the initial check in seconds. Thank you all for your help and concern.

04-01-2013, 06:29 AM	#1
Magic-Ian Magic-Ian Posts: 8 Karma: 10 Join Date: Apr 2013 Location: Buckinghamshire Device: Kobo Arc and Hanovan	List of books When I connect my device to calibre it stats doing a check on all books on device. This can take over an hour. This is a bit of a pain when all I wish to do is convert one or two books and upload to device. Is there any way around this please?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
List of books deleted.	dman003	Library Management	10	03-02-2013 10:57 AM
Create a list of your books	Pax	Library Management	3	04-25-2012 01:07 PM
Any here list books/eBooks on Google Books?	1611mac	Writers' Corner	6	12-20-2011 09:15 PM
Printing a list of books	Dottiejk	Library Management	1	02-08-2011 12:25 PM
Getting List of Books on Device	Sydney's Mom	Calibre	0	03-11-2010 09:07 AM

04-01-2013, 09:16 AM	#2
kovidgoyal creator of calibre Posts: 45,604 Karma: 28548974 Join Date: Oct 2006 Location: Mumbai, India Device: Various	right cilck on the device icon in calibre->configure this device->ignore most of the folders, thereby cutting down the scan time.

04-14-2013, 06:17 AM	#4
Magic-Ian Magic-Ian Posts: 8 Karma: 10 Join Date: Apr 2013 Location: Buckinghamshire Device: Kobo Arc and Hanovan	Thank you for the responce. I have not had a chance to try. I have just upgraded my PC and have had to do fresh installs. I now have a further problem in that I had my library backed up and after re-installation of Calibre I "added all the books. Now when I connect my reader (Kobo Arc) it starts to do a check but after 30/45 minutes Calibre closes (before finishing the check).

04-16-2013, 07:12 AM	#6
Magic-Ian Magic-Ian Posts: 8 Karma: 10 Join Date: Apr 2013 Location: Buckinghamshire Device: Kobo Arc and Hanovan	Things have now got worse. After trying several times to get Calibre to run, I did a complete re-install in the hopes that it would solve the problem. Now Calibre does not seem to recognise my reader is attached. I have a Kobo Arc, but not sure whether to connect as Kobo or Android. I have tried both but none seem to work. The Kobo is showing on the computer as a portable media device rather than an external drive. Not sure if this makes a difference.

04-19-2013, 05:25 AM	#8
Magic-Ian Magic-Ian Posts: 8 Karma: 10 Join Date: Apr 2013 Location: Buckinghamshire Device: Kobo Arc and Hanovan	I am running windos 7. I am not able to connect to folder as the device (kobo Arc) does not show up in the drop down box. I can access it through "my computer". What seems strange is that when I first did the OS updat, Calibre DID connect to device, but it crashed every time it did a search on the device. Then I re-installed Calibre, in the hope that it would cure the problem and it is now that it does not "see" the device. I am trying to get info from the Kobo IT guys to see if I can get it to connect as an external drive rather than a portable media player.

04-20-2013, 11:59 AM	#11
Magic-Ian Magic-Ian Posts: 8 Karma: 10 Join Date: Apr 2013 Location: Buckinghamshire Device: Kobo Arc and Hanovan	It is not in the ignore list. I will try the Android app when I get back from a trip. It has got me thinking though. I changed the Android to jellybean(?) at about the same time as I started having problems.

04-22-2013, 07:35 AM	#12
Magic-Ian Magic-Ian Posts: 8 Karma: 10 Join Date: Apr 2013 Location: Buckinghamshire Device: Kobo Arc and Hanovan	Problem solved. I tried the Calibre companion and nearly gave up trying. Then today I recieved a new network hub as the one I had was allowing piggybacking due to a crossed line(?) (my providers IT words). As soon as I connected the new hub, I tried again. It worked first time and did the initial check in seconds. Thank you all for your help and concern.