Kindle 4NT black demo unit - Page 3

geekmaster · 01-02-2013, 02:33 AM

I added the 4.1.0 link to the pastebin and snipurl, but they still need a matching 4.1.0 kernel to go with them.

knc1 · 01-02-2013, 03:56 AM

Quote:

Originally Posted by geekmaster

I added the 4.1.0 link to the pastebin and snipurl, but they still need a matching 4.1.0 kernel to go with them.

Maybe give them the link to your kernel extractor script?

dsmid · 01-02-2013, 04:08 AM

I've already PM'd Solaris on how to extract the kernels.

ixtab · 01-02-2013, 05:42 AM

It would be much simpler - and safer - to "extract" the kernel from the official 4.1.0 update.bin using kindletool

This is the only way to ensure that future upgrades will work smoothly.

Explanation: While it is possible to determine the size of the actual "required" kernel image, the kernels bundled in update files are usually padded with 0xFF bytes up to some boundary (IIRC, that's *usually*, but not always, the next multiple of 0x400). And, all the updates I've seen so far check for MD5 sums of the installed kernel (*including* the padding) to verify that the device is in a "known good" state, before performing the update. If you now flash a kernel obtained using the getkernels tool, that kernel *might* actually be shorter than what the update file provides, resulting in some of the "padding" bytes not being overwritten. And if you're out of luck, the next update will fail to install, because the md5sum of "kernel+padding" on the device does not match the expected one. I've seen it happen.

dsmid · 01-02-2013, 07:59 AM

Good point, ixtab.

I've uploaded the main kernel extracted from the official 4.1 update to the same location as the root filesystem image.

geekmaster · 01-02-2013, 10:44 AM

The pastebin and snipurl now contain both the 4.1.0 kernel and main partition URLs. Thanks for providing those URLs. I added a note that the black K4 needs at least version 4.1.0.

I suppose the getkernels tool should add 0xFF padding to match what the updates use. It may need to be updated to support that.

Gaz81 · 01-04-2013, 05:24 PM

Thanks folks, I have now got a black K4NT up and running and registered.

geekmaster · 01-04-2013, 05:31 PM

Quote:

Originally Posted by Gaz81

Thanks folks, I have now got a black K4NT up and running and registered.

I added your your K4B (black) debricking success report to the list in the simple debricking sticky thread first post.

P.S. All K4s are Non-Touch, so the NT in "K4NT" is not useful. It is just a K4 (or K4B for a black K4 when you need to distinguish it from a silver K4).

WhiteDwarf72 · 01-04-2013, 09:50 PM

Quote:

Originally Posted by geekmaster

The pastebin and snipurl now contain both the 4.1.0 kernel and main partition URLs. Thanks for providing those URLs. I added a note that the black K4 needs at least version 4.1.0.

First I wanted to greet everyone. I see you guys are awsome and you realy help people out.

I have perhaps stupid question but, where can I find this pastebin mentioned above? I've just purchased K4B and I'm gathering the knowledge to unbrick it.

Cheers

geekmaster · 01-04-2013, 10:13 PM

Quote:

Originally Posted by WhiteDwarf72

First I wanted to greet everyone. I see you guys are awsome and you realy help people out.

I have perhaps stupid question but, where can I find this pastebin mentioned above? I've just purchased K4B and I'm gathering the knowledge to unbrick it.

Cheers

Kindle Developer's Corner forum, "simple debricking" sticky thread, first post, References and Links section, "debricking repair" images.

WhiteDwarf72 · 01-05-2013, 05:38 AM

Thanks a million

Gaz81 · 01-05-2013, 08:15 AM

Quote:

Originally Posted by geekmaster

I added your your K4B (black) debricking success report to the list in the simple debricking sticky thread first post.

P.S. All K4s are Non-Touch, so the NT in "K4NT" is not useful. It is just a K4 (or K4B for a black K4 when you need to distinguish it from a silver K4).

Cheers geekmaster :-)

dsmid · 01-09-2013, 11:08 AM

I've just flashed & registered my black demo Kindle from ebay.
Thanks to everybody who made this possible.

geekmaster · 01-09-2013, 11:24 AM

Quote:

Originally Posted by dsmid

I've just flashed & registered my black demo Kindle from ebay.
Thanks to everybody who made this possible.

Added to "the list". Thanks.

Some silver K4 demos do not successfully register after debricking. It is good to know that your black K4 demo registered successfully...

01-02-2013, 10:44 AM	#36
geekmaster Carpe diem, c'est la vie. Posts: 6,433 Karma: 10773668 Join Date: Nov 2011 Location: Multiverse 6627A Device: K1 to PW3	The pastebin and snipurl now contain both the 4.1.0 kernel and main partition URLs. Thanks for providing those URLs. I added a note that the black K4 needs at least version 4.1.0. I suppose the getkernels tool should add 0xFF padding to match what the updates use. It may need to be updated to support that. Last edited by geekmaster; 01-02-2013 at 10:46 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kindle - Demo Unit ONLY	socaldude	Amazon Kindle	92	11-11-2012 11:49 PM
Iriver story hd demo unit only	badcopyinc	iRiver Story	1	06-22-2012 08:32 PM
Kindle Keyboard 3g/wifi demo unit	DWnMentor	Amazon Kindle	9	06-19-2012 07:30 PM
Local Best Buy has a K3 demo unit	jswinden	Amazon Kindle	0	09-17-2010 05:07 PM
Demo Unit	kielus	Sony Reader	14	02-19-2009 10:45 PM

01-02-2013, 02:33 AM	#31
geekmaster Carpe diem, c'est la vie. Posts: 6,433 Karma: 10773668 Join Date: Nov 2011 Location: Multiverse 6627A Device: K1 to PW3	I added the 4.1.0 link to the pastebin and snipurl, but they still need a matching 4.1.0 kernel to go with them.

01-02-2013, 04:08 AM	#33
dsmid Linux devotee Posts: 598 Karma: 2069047 Join Date: Feb 2011 Device: Kindle 3, Kindle 4B, Kindle PW2	I've already PM'd Solaris on how to extract the kernels.

01-02-2013, 05:42 AM	#34
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	It would be much simpler - and safer - to "extract" the kernel from the official 4.1.0 update.bin using kindletool This is the only way to ensure that future upgrades will work smoothly. Explanation: While it is possible to determine the size of the actual "required" kernel image, the kernels bundled in update files are usually padded with 0xFF bytes up to some boundary (IIRC, that's usually, but not always, the next multiple of 0x400). And, all the updates I've seen so far check for MD5 sums of the installed kernel (including the padding) to verify that the device is in a "known good" state, before performing the update. If you now flash a kernel obtained using the getkernels tool, that kernel might actually be shorter than what the update file provides, resulting in some of the "padding" bytes not being overwritten. And if you're out of luck, the next update will fail to install, because the md5sum of "kernel+padding" on the device does not match the expected one. I've seen it happen.

01-02-2013, 07:59 AM	#35
dsmid Linux devotee Posts: 598 Karma: 2069047 Join Date: Feb 2011 Device: Kindle 3, Kindle 4B, Kindle PW2	Good point, ixtab. I've uploaded the main kernel extracted from the official 4.1 update to the same location as the root filesystem image.

01-04-2013, 05:24 PM	#37
Gaz81 Junior Member Posts: 3 Karma: 10 Join Date: Jan 2013 Device: Kindle 4	Thanks folks, I have now got a black K4NT up and running and registered.

01-05-2013, 05:38 AM	#41
WhiteDwarf72 Member Posts: 23 Karma: 10 Join Date: Jan 2013 Location: United Kingdom Device: K4B	Thanks a million

01-09-2013, 11:08 AM	#43
dsmid Linux devotee Posts: 598 Karma: 2069047 Join Date: Feb 2011 Device: Kindle 3, Kindle 4B, Kindle PW2	I've just flashed & registered my black demo Kindle from ebay. Thanks to everybody who made this possible.