KindleTool: Create/Unpack Kindle update files - Page 3

ixtab · 01-02-2013, 12:06 PM

I don't use Windows at all, but from what I understand, the Windows binaries that NiLuJe publishes are self-contained. So normally, they should simply work, regardless of your Windows version.

silver18 · 01-02-2013, 12:16 PM

Yep, they work fine on Windows!
Just use the plain old CMD!

DuckieTigger · 01-02-2013, 12:57 PM

Quote:

Originally Posted by ixtab

I don't use Windows at all, but from what I understand, the Windows binaries that NiLuJe publishes are self-contained. So normally, they should simply work, regardless of your Windows version.

Quote:

Originally Posted by silver18

Yep, they work fine on Windows!
Just use the plain old CMD!

Thanks, will check that out then. For now I will make it DIY instructions for anyone to try out before I pack it up.

twobob · 01-04-2013, 04:36 PM

For me. I had to take note of..

Quote:

If you want to do it the hard way:

Get libarchive-3.0.4 from http://libarchive.github.com/
Configure it (I do a minimal build for the binary packages: ./configure --enable-static --disable-shared --disable-xattr --disable-acl --with-zlib --without-bz2lib --without-lzmadec --without-iconv --without-lzma --without-nettle --without-expat --without-xml2)
Build it
DON'T install it
Instead, create an includes directory in KindleTool/KindleTool/
Copy archive.h & archive_entry.h from the libarchive-3.0.4/libarchive directory in that includes directory
Create a lib directory in KindleTool/KindleTool/
Copy libarchive.a from the libarchive-3.0.4/.libs directory in that lib directory
(it is there... really...)
And finally, make clean && make in KindleTool

with that it builds great.

Thanks for the tips.

NiLuJe · 01-15-2013, 11:32 AM

@DuckieTigger: The 'mingw' binaries are native, like silver18 said, you can run them in your favorite native Windows terminal

. (One thing of note, though: it'll probably horribly break on anything non-ASCII, and even then, some libarchive output might be mangled [char vs wchar, and all the fun it implies])..

The 'cygwin' binaries, on the other hand, will only run inside a cygwin shell, but should be as 'stable' as any other POSIX build, so, if you encounter a weird error with the native binary, it can't hurt to check if a POSIX-friendly build fails in the same way

.

@twobob: IIRC, there's now a separate buildscript (tools/simple-linux-static-build.sh) that handles that automagically, because there's apparently a staggering number of Linux distro out there running out of date software ;D.

ixtab · 01-15-2013, 11:50 AM

@NiLuJe: welcome back

... and to add a bit more to the stress, could you please take a look at this post and the follow-ups? Bottom line is that there seems to be a B01F Paperwhite out there (japanese 3G model), which doesn't seem to be supported yet (though I didn't check as thoroughly as I should have, I'm just assuming that's the reason).

If so, could you please include support for that model, and release the binaries? That'd be very much appreciated... Thanks a ton!

NiLuJe · 01-15-2013, 02:18 PM

@ixtab: Thanks!

Ah! I've been expecting this one to pop up for quite some time now, so I'm glad to finally have it pinned down!

Japanese 3G PW support has been added to github. No ETA yet on the next binary release, but it probably won't happen until the next couple of weeks.

(@ixtab: If you really need Linux binaries, I can probably rush those tonight).

ixtab · 01-15-2013, 02:45 PM

Quote:

Originally Posted by NiLuJe

(@ixtab: If you really need Linux binaries, I can probably rush those tonight).

Yeah, that would really be great! I'm currently looking at the JBPatch stuff - thanks to Amazon, everything got broken again with the new FW, of course

, but I'd really like to release a version that works for everyone (as of now).

Spoiler:

^ That's the one I'm referring to. Thanks again!

twobob · 01-15-2013, 03:08 PM

Quote:

Originally Posted by NiLuJe

...

@twobob: IIRC, there's now a separate buildscript (tools/simple-linux-static-build.sh) that handles that automagically, because there's apparently a staggering number of Linux distro out there running out of date software ;D.

me@dev ~/GIT/KindleTool $ git pull
me@dev ~/GIT/KindleTool/tools $ ./kindletool-static-build.sh

Quote:

blah...

me@dev ~/GIT/KindleTool/KindleTool/Release $ ./kindletool --help

Quote:

...blah
-d, --device pwgj Kindle PaperWhite Wifi+3G Japan
-d, --device kindle5 Alias for k5w, k5g, k5gb, pw, pwg & pwgb
-d, --device touch Alias for k5w, k5g & k5gb
-d, --device paperwhite Alias for pw, pwg & pwgb

nice one.

NiLuJe · 01-15-2013, 03:12 PM

Updated the first post with Linux & Windows binaries (for now). OS X users, beware of the filename

.

ixtab · 01-15-2013, 05:15 PM

Thank you so much!

Using version 1.5.6-linux-i686-openssl-0.9.8 right now.

NiLuJe · 01-26-2013, 11:09 PM

Released 1.5.7, with Canadian 3G PaperWhite support

.

(Still no up to date OS X binaries until I get my hands on a Mac, though...).

eureka · 01-26-2013, 11:21 PM

@NiLuJe, make a heroic attempt, rewrite it in Go. You'll get for free: compress, archive and crypto support in standard library, statically linked binaries, easy and fast cross-compiling for Windows, Linux, OS X.

PoP · 01-28-2013, 12:57 PM

On behalf of B01C's. Thanks.

twobob · 01-30-2013, 11:34 AM

Quote:

Originally Posted by PoP

On behalf of B01C's. Thanks.

Canada Rocks.

01-15-2013, 03:12 PM	#40
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Updated the first post with Linux & Windows binaries (for now). OS X users, beware of the filename . Last edited by NiLuJe; 01-15-2013 at 05:44 PM.

01-28-2013, 12:57 PM	#44
PoP curly᷂͓̫̙᷊̥̮̾ͯͤͭͬͦͨ ʎʌɹnɔ Posts: 3,015 Karma: 50506927 Join Date: Dec 2010 Location: ♁ ᴺ₄₅°₃₀' ᵂ₇₃°₃₇' ±₆₀" Device: K3₃.₄.₃ PW3&4₅.₁₃.₃	█ ♣ █ On behalf of B01C's. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BookCreator: Does anybody create IMP files using BC?	=X=	Workshop	0	01-07-2011 01:20 PM
Create readable .mobi files out of pdfs	jordan13589	Amazon Kindle	3	12-21-2010 11:35 PM
Create catalogue without creating new files and folders?	zaphod234	Calibre	4	07-21-2010 06:44 PM
Firmware Update Kindle dx not sorting recent files after 2.5 update,help	nayito2	Amazon Kindle	8	06-05-2010 12:49 PM
unpack requires a string argument of length 2	Sannepan	Calibre	2	02-23-2010 02:05 PM

01-02-2013, 12:06 PM	#31
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	I don't use Windows at all, but from what I understand, the Windows binaries that NiLuJe publishes are self-contained. So normally, they should simply work, regardless of your Windows version.

01-02-2013, 12:16 PM	#32
silver18 THE NOOB Posts: 701 Karma: 1545649 Join Date: Jan 2012 Location: Italy Device: Kindle Touch 5.3.2	Yep, they work fine on Windows! Just use the plain old CMD!

01-15-2013, 11:32 AM	#35
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@DuckieTigger: The 'mingw' binaries are native, like silver18 said, you can run them in your favorite native Windows terminal . (One thing of note, though: it'll probably horribly break on anything non-ASCII, and even then, some libarchive output might be mangled [char vs wchar, and all the fun it implies]).. The 'cygwin' binaries, on the other hand, will only run inside a cygwin shell, but should be as 'stable' as any other POSIX build, so, if you encounter a weird error with the native binary, it can't hurt to check if a POSIX-friendly build fails in the same way . @twobob: IIRC, there's now a separate buildscript (tools/simple-linux-static-build.sh) that handles that automagically, because there's apparently a staggering number of Linux distro out there running out of date software ;D.

01-15-2013, 11:50 AM	#36
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	@NiLuJe: welcome back ... and to add a bit more to the stress, could you please take a look at this post and the follow-ups? Bottom line is that there seems to be a B01F Paperwhite out there (japanese 3G model), which doesn't seem to be supported yet (though I didn't check as thoroughly as I should have, I'm just assuming that's the reason). If so, could you please include support for that model, and release the binaries? That'd be very much appreciated... Thanks a ton!

01-15-2013, 02:18 PM	#37
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@ixtab: Thanks! Ah! I've been expecting this one to pop up for quite some time now, so I'm glad to finally have it pinned down! Japanese 3G PW support has been added to github. No ETA yet on the next binary release, but it probably won't happen until the next couple of weeks. (@ixtab: If you really need Linux binaries, I can probably rush those tonight).

01-15-2013, 05:15 PM	#41
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	Thank you so much! Using version 1.5.6-linux-i686-openssl-0.9.8 right now.

01-26-2013, 11:09 PM	#42
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Released 1.5.7, with Canadian 3G PaperWhite support . (Still no up to date OS X binaries until I get my hands on a Mac, though...).

01-26-2013, 11:21 PM	#43
eureka but forgot what it's like Posts: 741 Karma: 2345678 Join Date: Dec 2011 Location: north (by northwest) Device: Kindle Touch	@NiLuJe, make a heroic attempt, rewrite it in Go. You'll get for free: compress, archive and crypto support in standard library, statically linked binaries, easy and fast cross-compiling for Windows, Linux, OS X.