05-04-2012, 09:35 AM | #76 |
Mono
Posts: 699
Karma: 13333
Join Date: Jan 2012
Device: Boox M92
|
I am not sure. It used to occure quite a bit in scribling in pdf in older versions of RC 1.7 firmware, but in last one (or two) it seems to be OK. Or at least very occasional.
It seems to me it used to happen also in Onyx Scribling App (with 1.6 and older RC 1.7). It has never happened to me in your scribling app, but I started to test it with latest RC 1.7. In all 3 applications, there is the problem of joining the lines if you draw to the edge of screen, lift the pen and place it elsewhere on the screen again. The event of lifting the pen is probably lost.... |
05-04-2012, 09:42 AM | #77 |
Connoisseur
Posts: 64
Karma: 669
Join Date: Jan 2012
Device: M92
|
Does this still occur in the latest version of my application? I thought I fixed that...
|
05-04-2012, 01:33 PM | #78 | |
Groupie
Posts: 187
Karma: 15126
Join Date: Feb 2012
Device: ONYX M96
|
Quote:
It's driving me crazy, I'm a student and often have to copy some stuff from the black board and have to stop writing for a moment to look at the board... Last edited by por; 05-04-2012 at 01:40 PM. |
|
05-05-2012, 02:11 AM | #79 |
Enthusiast
Posts: 26
Karma: 15384
Join Date: Apr 2012
Device: Onyx Boox M92
|
exists a ready compiled package of your "app"?
|
05-06-2012, 12:50 PM | #80 |
Mono
Posts: 699
Karma: 13333
Join Date: Jan 2012
Device: Boox M92
|
|
05-06-2012, 08:42 PM | #81 |
Connoisseur
Posts: 64
Karma: 669
Join Date: Jan 2012
Device: M92
|
Sure, it is in the attachments of this thread. The latest version is here: https://www.mobileread.com/forums/att...9&d=1334800084
|
05-07-2012, 02:40 PM | #82 |
Enthusiast
Posts: 26
Karma: 15384
Join Date: Apr 2012
Device: Onyx Boox M92
|
Sorry if my question is stupid or the answer is written down here anywhere.
How do i install your scribble file or start it? |
05-07-2012, 03:22 PM | #83 |
Connoisseur
Posts: 64
Karma: 669
Join Date: Jan 2012
Device: M92
|
I am sorry, the file in the archive has the wrong extension (none). Rename it to "scribble.oar" and put it somewhere on the device. In the file browser, "click" on the file to start the application.
|
05-07-2012, 04:11 PM | #84 |
Enthusiast
Posts: 26
Karma: 15384
Join Date: Apr 2012
Device: Onyx Boox M92
|
ok thx, now it works!
keep up developping this app, it works much faster than the one included in the firmware! |
05-09-2012, 01:57 AM | #85 |
Enthusiast
Posts: 25
Karma: 30
Join Date: Sep 2009
Location: Switzerland
Device: Boox M92, formerly iRex DR1000 (broke just as they went bankrupt)
|
Hi Peterx, I was a bit sceptical if there is a need for another scribbling app, as the boox already bundles one. But I have now tried yours (scribble_2012-03-04.zip) and the bundled one in 1.7RC and I believe onyx should drop theirs immediately and adopt yours. Let me give reasons and a few suggestions:
What's bad about the bundled one:
Yours is nice because:
Improvement suggestions (filed on github):
I do appreciate the app even at this early stage and welcome any further development on it. I will try to get the scratchbox env set up soon, so that I can compile current versions myself. Lastly, is it possible to add the scribble app to the Boox "Application" view by adding some link/entry somewhere? Last edited by spaetz; 05-11-2012 at 02:57 AM. |
05-17-2012, 12:34 PM | #86 | |
M92 info archivist
Posts: 238
Karma: 1398
Join Date: Jun 2008
Device: IRex Iliad 2nd ed., Onyx Boox M92, Onyx Boox Max Lumi
|
Quote:
I'd have a request: Could you please update the first post of the thread whenever you upload a new version? I've linked that one in the software wiki, and it'd make the current version easier to find Cheers! |
|
05-23-2012, 03:06 PM | #87 |
Groupie
Posts: 187
Karma: 15126
Join Date: Feb 2012
Device: ONYX M96
|
Thx again for the great work
I've noticed two more issues: 1) If your program is switched on and you accidentally press and hold the joystick (inwards), the program becomes unresponsive, you cannot exit the program or go to a new page. The only solution is to restart the device. This happen to me a lot, since in my bag the device gets pressed against other objects. 2) If you write stuff at the bottom of the page (1-2 cm), this won't appear in Xournal so one has to avoid writing on the bottom of the page |
06-23-2012, 01:34 PM | #88 |
Mono
Posts: 699
Karma: 13333
Join Date: Jan 2012
Device: Boox M92
|
peterx:
1) The issue with joining glyphs after moving pen ouside drawing area seems to be solved. 2) I am not able to reproduce por's issue with pen stopping writing after keeping it for a few seconds above screen. Neither in your application nor in any other one. Something like that occures time from time in pdf reader, but I am not able to reproduce it. 3) Could you fix the issue with 'mirror displaying' if the display rotation is 180 (upside down). If I touch the screen in e.g. lower left corner, the dot is shown in upper right corner. When I move to Prev/Next page and back everything is displayed corrrectly. But if I touch the redraw icon on statusbar (while drawing) before leaving the page (by Prev/Next), things are displayed wrongly. So, the 'bug' occures only while drawing and refreshing before I leave the page. If I return back the draving is diplayed correctly and refresh icon redraws also correctly. If I continue drawing. New drawings are placed incorectly and old correctly. If I leave page and return everithing is again displayed OK. So, there is some kind of misunderstanding how to draw a rotated screen before the page is left. It shouldn't be hard to fix, I hope. The correct rotation is done at some moment, so it is only needed do it sooner. 4) Would it be possible to implement background picture? And if yes, would it be possible that picture is different for each page? My idea is that if the picture is without a 3 digit number at the end, then it is the same for all pages. If it has 3 digit numbers, 001 becomes assigned to page 1, 002 to page 2, and 000 to any page that does not have its own background file. It could be used for keeping the agenda (1 year file and/or 12 monthly background files and/or 52/53/54 weekly files). |
11-02-2012, 07:12 PM | #89 |
Groupie
Posts: 187
Karma: 15126
Join Date: Feb 2012
Device: ONYX M96
|
Has anyone noticed that peterx's app. is not working any more on the new firmware 18? Since the new PDF reader has not resolved the issue where straight vert. and horiz. lines are not merged to the pdf, Peterx's app remains the only usable solution for scribbling for me.
|
11-07-2012, 10:27 AM | #90 | |
Connoisseur
Posts: 64
Karma: 669
Join Date: Jan 2012
Device: M92
|
Quote:
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Autostart an application | apos | PocketBook | 2 | 01-07-2012 05:38 PM |
Application update: application not installed error | Merischino | Kindle Fire | 4 | 12-01-2011 10:30 PM |
Android ! Application not installed ! | wdcorbitt | enTourage Archive | 9 | 05-18-2011 10:30 AM |
iPad Best application for epub? | kgian | Apple Devices | 7 | 07-25-2010 11:51 AM |
how to close an application? | mduijkers | enTourage Archive | 2 | 06-14-2010 11:41 AM |