PRS+: Enhanced firmware for Sony Reader, Folders, Games & more - Page 211

quisvir · 12-14-2011, 06:11 PM

Wait, you have the Touch Settings addon on your 600? That's not right, it's only for x50 models so far. And there's an exclude in the build.xml, so it shouldn't be included in a custom build for 600.

sengian · 12-15-2011, 01:00 AM

Quote:

Originally Posted by quisvir

Wait, you have the Touch Settings addon on your 600? That's not right, it's only for x50 models so far. And there's an exclude in the build.xml, so it shouldn't be included in a custom build for 600.

Good question, I don't think so, but it's the one allowing to select single tap double tap and so on. That's something which is around for some time. By talking of touch settings, I was talking about the section in translation file.
I can add that I build trunk, no personal tweaks for now apart from lang.

Let's be simple, the chains are: OPTION_NODICT, CLOSE_POPUP..., OPTION_NOGESTURE, PAGE_TURN... and ZOOMLOCK_PANNING

BenChen · 12-15-2011, 05:07 AM

Quote:

Originally Posted by sengian

Good question, I don't think so, but it's the one allowing to select single tap double tap and so on. That's something which is around for some time. By talking of touch settings, I was talking about the section in translation file.
I can add that I build trunk, no personal tweaks for now apart from lang.

Let's be simple, the chains are: OPTION_NODICT, CLOSE_POPUP..., OPTION_NOGESTURE, PAGE_TURN... and ZOOMLOCK_PANNING

Hi sengian & quisvir,

I think I can clear up the mystery. These touch settings are still in ViewerSettings_600.js. This file gets its strings from "ViewerSettings_x50", but since many (perhaps all?) strings have all been moved to "TouchSettings_x50", they are no longer available.

We will need to take a look and see if all strings required for ViewerSettings_600.js have been moved (in which case it will be easy to change the L call). If not, it might be more complicated...

Sincerely,
Ben.

quisvir · 12-15-2011, 06:24 AM

Thanks Ben, what you describe is indeed the case. All of the strings have been moved to TouchSettings_x50, so changing the L call would be a partial fix for now. Some strings have been removed completely though, since their options have been made obsolete by TS.

The real solution is moving "port TS to 600" a bit higher up on my todo list

quisvir · 12-15-2011, 08:44 AM

Well, that turned out to be far less work than I'd imagined. TouchSettings now ported to 600 in revision e49428e954.

Please let me know if everything works, as I don't have a 600 to test with.

JSWolf · 12-15-2011, 09:28 AM

So when is the version with sub-collections going to be released?

kartu · 12-15-2011, 09:29 AM

Well, there is outstanding critical bug in 2.0.x, User Guide is quite far from being finished, so I guess some time in January.

sengian · 12-15-2011, 12:57 PM

Quote:

Originally Posted by quisvir

Well, that turned out to be far less work than I'd imagined. TouchSettings now ported to 600 in revision e49428e954.

Please let me know if everything works, as I don't have a 600 to test with.

No more translation problems at least...Will keep in touch if I have a problem with some of the functions I use

JSWolf · 12-15-2011, 02:06 PM

Quote:

Originally Posted by kartu

Well, there is outstanding critical bug in 2.0.x, User Guide is quite far from being finished, so I guess some time in January.

What outstanding critical bugs are there in 2.x?

Terisa de morgan · 12-15-2011, 02:07 PM

Quote:

Originally Posted by kartu

If anyone feels like contributing to PRS+ 2.0 User Guide, ping me for access rights.

PS
2Analogus
Thanks for reporting.

If you think I can help, no problem with it (I've been playing around a bit with some options

)

kartu · 12-15-2011, 02:31 PM

Quote:

Originally Posted by JSWolf

What outstanding critical bugs are there in 2.x?

#246, but it seems to be only affecting users using PRS+ together with porkupan's/amutin's firmware. (update: #249, not #246)

Quote:

Originally Posted by Terisa de morgan

If you think I can help, no problem with it (I've been playing around a bit with some options

)

Uhm, if anyone feels like contributing to user guide, just ping me for rights. (also if you want to have pictures in it)

Plan is ironing out English version first, then translating it to German, Spanish, Russian (most active user base), possibly French.

sengian · 12-15-2011, 04:24 PM

Quote:

Originally Posted by kartu

Plan is ironing out English version first, then translating it to German, Spanish, Russian (most active user base), possibly French.

At least, you are not lacking in ambition.

Send a message when you are ready for translation, I will try to take care of French, even if it is not very quick. I would propose to help writing the wiki, but I am not using enough options.

EDIT: After looking again at the guide, I may be of help so if you could gve me the rights I would try to start during holidays.

kartu · 12-15-2011, 04:41 PM

Quote:

Originally Posted by sengian

At least, you are not lacking in ambition.

Send a message when you are ready for translation, I will try to take care of French, even if it is not very quick. I would propose to help writing the wiki, but I am not using enough options.

EDIT: After looking again at the guide, I may be of help so if you could gve me the rights I would try to start during holidays.

Done. Test if you can edit.

sengian · 12-15-2011, 04:52 PM

Quote:

Originally Posted by kartu

Done. Test if you can edit.

Yes, I can thanks.

Haloruler64 · 12-15-2011, 09:15 PM

Hey guys. I'm brand new here, and I don't exactly know where to post, so I thought I'd post here. Apologies in advanced if I am breaking rules!

I installed PRS+ (2.0.17rc3) on my PRS-600 today. I then deleted the folder off of the reader, like mentioned in the instructions. I just tried to read a .txt in Russian, and it won't work. I read it supports cryllic and Russian, but I can't get a simple Russian .txt to display properly. Shows weird characters. Anything I'm missing? My fathers PRS-900 with Russification (also done today) reads the same file fine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using HD Folders as Collections on Sony PRS-505	fglaysher	Calibre	8	07-26-2010 09:55 PM
Enhanced Firmware for V3	keng2000	HanLin eBook	12	04-12-2010 09:30 AM
Poll: Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	70	02-18-2009 06:34 PM
Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	23	12-08-2008 06:56 AM
Sub folders in firmware v1.08	Prince Hal	Amazon Kindle	28	10-23-2008 03:20 PM

12-14-2011, 06:11 PM	#3151
quisvir Addict Posts: 238 Karma: 6875 Join Date: Feb 2009 Location: Netherlands Device: Kindle PW2	Wait, you have the Touch Settings addon on your 600? That's not right, it's only for x50 models so far. And there's an exclude in the build.xml, so it shouldn't be included in a custom build for 600.

12-15-2011, 06:24 AM	#3154
quisvir Addict Posts: 238 Karma: 6875 Join Date: Feb 2009 Location: Netherlands Device: Kindle PW2	Thanks Ben, what you describe is indeed the case. All of the strings have been moved to TouchSettings_x50, so changing the L call would be a partial fix for now. Some strings have been removed completely though, since their options have been made obsolete by TS. The real solution is moving "port TS to 600" a bit higher up on my todo list

12-15-2011, 08:44 AM	#3155
quisvir Addict Posts: 238 Karma: 6875 Join Date: Feb 2009 Location: Netherlands Device: Kindle PW2	Well, that turned out to be far less work than I'd imagined. TouchSettings now ported to 600 in revision e49428e954. Please let me know if everything works, as I don't have a 600 to test with.

12-15-2011, 09:28 AM	#3156
JSWolf Resident Curmudgeon Posts: 79,803 Karma: 146918083 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	So when is the version with sub-collections going to be released?

12-15-2011, 09:29 AM	#3157
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	Well, there is outstanding critical bug in 2.0.x, User Guide is quite far from being finished, so I guess some time in January.

12-15-2011, 09:15 PM	#3165
Haloruler64 Nameless Being	Hey guys. I'm brand new here, and I don't exactly know where to post, so I thought I'd post here. Apologies in advanced if I am breaking rules! I installed PRS+ (2.0.17rc3) on my PRS-600 today. I then deleted the folder off of the reader, like mentioned in the instructions. I just tried to read a .txt in Russian, and it won't work. I read it supports cryllic and Russian, but I can't get a simple Russian .txt to display properly. Shows weird characters. Anything I'm missing? My fathers PRS-900 with Russification (also done today) reads the same file fine.

Advert

Advert