PRS-T1 Case Sony PRS T1 - Page 7

graycyn · 11-13-2011, 01:17 PM

If any one gets to try the M-Edge jacket, let us know. My local Wal-Mart is stocking them and I was wondering if a T-1 might possibly fit.

KNI · 11-13-2011, 03:04 PM

I would like a cover that is like the cover that came with the Sony PRS-505 - that was elegant. The cover Sony sells for the PRS-T1 is nowhere near as well made and is horrendously overpriced.

What is needed is a cover manufacturer to bite the bullet and invest the money for the plastic mold for the spine attachment. My guess is that the mold would cost about US $5000, and the parts about $ .05 each made from polycarbonate. Then a really nice leather cover with magnetic closing could be offered and at US $10 each the manufacturer would be laughing all the way to the bank and at the same time do all of us Sony users a real service.

I do understand all too well though that it is *so* easy to tell someone else how to run their business...

Cheers

JSWolf · 11-13-2011, 03:49 PM

Quote:

Originally Posted by ScottyG

I just bought one of these:

http://www.ebay.com/itm/CaseCrown-Ca...00873282761411

And it seems like a good basic neoprene bag for carrying my T1 around without getting it scratched up. I like holding the unit "naked" when reading, so this is just for using during transport in my backpack or bike pannier.

Scott

And if you drop your T1, you risk it breaking and having to buy another or do without. Not a good idea at all to go without a cover.

JSWolf · 11-13-2011, 03:52 PM

Delete this post

JSWolf · 11-13-2011, 04:00 PM

Quote:

Originally Posted by chrisridd

There's a review of the lighted case in white at the gadgeteer http://the-gadgeteer.com/2011/10/29/...-light-review/ which shows the clip in rear. Makes it nice and slim.

IMHO the case you've bought without the light looks better. The plastic for the light version looks cheap, at least in white.

I have the light cover for my 650 and I do use the light. A clip light is not as convenient. it means you have something else to have to carry with you. What really surprises me is that we don't see more third party covers with a built-in light for eink devices.

JSWolf · 11-13-2011, 04:01 PM

Quote:

Originally Posted by Klein Nijenhuis

Dear all, there will be a case with an inner holder within 2 weeks. By the end of november we will launch a case with light, I will post a few pictures soon.

Who is all?

I've not seen any users with the name of all.

JSWolf · 11-13-2011, 04:05 PM

Quote:

Originally Posted by Ozric

It looks like Tuff-Luv will be coming out with their T1 cases in about 27 days. They're now accepting preorders, although they haven't posted any pictures yet. I have one of their cases on my PRS-350 and it's one of the best cases I've ever had for an eReader.

http://tuff-luv.com/e-readers/sony-r...-t1-cases.html

Although I wish Oberon made cases for the T1

I've never owned an Oberon before and they look very nice.

Tuff-Luv is just too expensive. $40 (roughly) is just too much for a cover without a light.

Klein Nijenhuis · 11-14-2011, 07:29 AM

Hereby some pictures of the new cover with an inner holder:

trekker99 · 11-14-2011, 08:36 AM

Quote:

Originally Posted by Klein Nijenhuis

Hereby some pictures of the new cover with an inner holder:

Did you mean to post the link as an image? I had to open the link in a new tab...

http://www.facebook.com/#!/pages/Gec...09452472469103

*edit*

The case looks nice. Do you have any photos of where the stylus would go?

Thanks!

*edit2*

Is the model with the light. I didn't see any...

Klein Nijenhuis · 11-14-2011, 09:11 AM

The stylus will be in the middle of the case, same position as our current sony prs t1 case. I do have pictures for the case with light, I will post them online soon. It will be available in the beginning of december.

Zielarnik · 11-14-2011, 12:32 PM

Quote:

Originally Posted by Klein Nijenhuis

The stylus will be in the middle of the case, same position as our current sony prs t1 case. I do have pictures for the case with light, I will post them online soon. It will be available in the beginning of december.

Oh yes, please, do post the pictures of the case with light as soon as possible. How much will it cost?

CommonReader · 11-14-2011, 03:51 PM

Quote:

Originally Posted by KNI

I would like a cover that is like the cover that came with the Sony PRS-505 - that was elegant. The cover Sony sells for the PRS-T1 is nowhere near as well made and is horrendously overpriced.

What is needed is a cover manufacturer to bite the bullet and invest the money for the plastic mold for the spine attachment. My guess is that the mold would cost about US $5000, and the parts about $ .05 each made from polycarbonate. Then a really nice leather cover with magnetic closing could be offered and at US $10 each the manufacturer would be laughing all the way to the bank and at the same time do all of us Sony users a real service.

I do understand all too well though that it is *so* easy to tell someone else how to run their business...

Cheers

Don't know if it has been shown already, but you should take a look at the Noreve cover:

http://www.noreve.com/langue/en/prod...ther_case.html

I don't have it myself, but I have the the version for the 650. Beautiful leather and beautifully made.

pholy · 11-14-2011, 05:00 PM

That Noreve looks lovely, but whew, €50! I like the look of the Gecko Luxe, too, and wonder how much it will cost.

It the meanwhile, I will continue using the one I made from the foam bag my T1 came in, with a piece of stiff foam on one side to protect the screen (could be corrugated cardboard) and all wrapped in duct-tape. Not only is it cheap, it is also ugly! Come on, Gecko...

graycyn · 11-14-2011, 05:05 PM

Quote:

Originally Posted by CommonReader

Don't know if it has been shown already, but you should take a look at the Noreve cover:

http://www.noreve.com/langue/en/prod...ther_case.html

I don't have it myself, but I have the the version for the 650. Beautiful leather and beautifully made.

Yay! More options! Though still VERY interested in seeing the Gecko lighted case! I don't like the Sony lighted cover that much, but I can see I would like the convenience of having a light handy at times.

Nicko · 11-14-2011, 06:17 PM

Quote:

Originally Posted by Klein Nijenhuis

Hereby some pictures of the new cover with an inner holder:

That looks really nice. Will you be posting overseas?.

11-13-2011, 03:52 PM	#94
JSWolf Resident Curmudgeon Posts: 80,727 Karma: 150249619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Delete this post Last edited by JSWolf; 11-13-2011 at 04:41 PM.

11-14-2011, 05:00 PM	#103
pholy Booklegger Posts: 1,801 Karma: 7999816 Join Date: Jun 2009 Location: Toronto, Ontario, Canada Device: BeBook(1 & 2010), PEZ, PRS-505, Kobo BT, PRS-T1, Playbook, Kobo Touch	That Noreve looks lovely, but whew, €50! I like the look of the Gecko Luxe, too, and wonder how much it will cost. It the meanwhile, I will continue using the one I made from the foam bag my T1 came in, with a piece of stiff foam on one side to protect the screen (could be corrugated cardboard) and all wrapped in duct-tape. Not only is it cheap, it is also ugly! Come on, Gecko... Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sell Sony PRS-350 plus case (both pink)	witeowl	Flea Market	11	05-09-2018 11:20 AM
Ended NEW SONY PRS-350 with genuine SONY case	pashlit	Flea Market	21	07-05-2011 03:55 PM
Ended Sony PRS 600 with case	just_kev	Flea Market	3	09-10-2010 03:28 AM
Ended Sony PRS-300 w/Leather Case	jhempel24	Flea Market	3	08-19-2010 09:12 AM
Ended Sony PRS-600 (black) with Sony case (USD $170 shipped)	AlexC	Flea Market	4	06-03-2010 08:30 PM

11-13-2011, 01:17 PM	#91
graycyn Wizard Posts: 1,592 Karma: 11722446 Join Date: Aug 2010 Location: NE Oregon Device: Kobo Sage, Pocketbook Era, Kobo Forma, Kindle Oasis 2	If any one gets to try the M-Edge jacket, let us know. My local Wal-Mart is stocking them and I was wondering if a T-1 might possibly fit.

11-13-2011, 03:04 PM	#92
KNI Connoisseur Posts: 51 Karma: 31226 Join Date: Feb 2010 Location: Oregon Device: Sony PRS-650	I would like a cover that is like the cover that came with the Sony PRS-505 - that was elegant. The cover Sony sells for the PRS-T1 is nowhere near as well made and is horrendously overpriced. What is needed is a cover manufacturer to bite the bullet and invest the money for the plastic mold for the spine attachment. My guess is that the mold would cost about US $5000, and the parts about $ .05 each made from polycarbonate. Then a really nice leather cover with magnetic closing could be offered and at US $10 each the manufacturer would be laughing all the way to the bank and at the same time do all of us Sony users a real service. I do understand all too well though that it is so easy to tell someone else how to run their business... Cheers

11-14-2011, 07:29 AM	#98
Klein Nijenhuis Zealot Posts: 100 Karma: 91530 Join Date: Dec 2009 Device: Onyx Boox	Hereby some pictures of the new cover with an inner holder:

11-14-2011, 09:11 AM	#100
Klein Nijenhuis Zealot Posts: 100 Karma: 91530 Join Date: Dec 2009 Device: Onyx Boox	The stylus will be in the middle of the case, same position as our current sony prs t1 case. I do have pictures for the case with light, I will post them online soon. It will be available in the beginning of december.