PRS+: Enhanced firmware for Sony Reader, Folders, Games & more - Page 161

Terisa de morgan · 08-30-2011, 05:48 AM

Quote:

Originally Posted by kartu

Knowing exactly which bindings didn't work would help much more than just "bindings do not work".

I've opened an issue with the data I have at this moment. On weekend I'll test it in a PRS-650.

quisvir · 08-30-2011, 05:54 AM

Quote:

Originally Posted by kartu

Knowing exactly which bindings didn't work would help much more than just "bindings do not work".

I will do some testing this afternoon to come up with some more info! As mentioned above, my comment wasn't meant as an issue report.

Quote:

quisvir good job, the only problematic part is having to edit asset xml files (which were supposed to be "translate once and forget", the rest was supposed to come from PRS+ translation spreadsheet). Hopefully there should be a way to inject those into "strings" object (initialized from assets.xml), so that we could keep these strings in the spreadsheet.

I'll see if I can find a way to avoid the asset xml files. I was hoping to avoid the xml's completely from the beginning, but I couldn't figure out the xml injection functions used by kbook.xs.

Quote:

Another thing is, there is already 'mark" for 300, that is always manual (allows to assign up to 5 (?) subicons to a book) which I planned to implement for other models. On x50, the default feature is more of a "book opened"/"is new" than "read"/"unread".

Sorry, I hadn't seen that addon! However, using the .opened property did seem like a sensible method to use, since the reader itself calls the collection 'Unread Books'. Also, I've seen a good number of people frustrated by the sony's behaviour of removing the 'new' label as soon as a book is opened once. But I gladly leave the decision to you

kartu · 08-30-2011, 06:35 AM

Quote:

Sorry, I hadn't seen that addon! However, using the .opened property did seem like a sensible method to use, since the reader itself calls the collection 'Unread Books'. Also, I've seen a good number of people frustrated by the sony's behaviour of removing the 'new' label as soon as a book is opened once. But I gladly leave the decision to you

If you stick with "new" keyword, there should be no clashes.

quisvir · 08-30-2011, 07:09 PM

Problem solved! I found a way around the assets.xml files, and changed the terminology to the 'new' flag. New revision has been pushed (assets files are in the new rev as well, because I didn't know how to restore them to the original versions in another way).

dontriston · 08-31-2011, 01:59 PM

Hello again.
I know is very later, but I have found a very bad bug yesterday.
If you select the Oxford Spanish Dictionary (ES-EN), you can look for a definition into a book, but if you want type a word, it´s impossible, the keyboard is missing!!!
Do you know this bug, Kartu?
Do you know any solution for spanish users?
Thank you very much. Yo do a big work.

Mark Nord · 08-31-2011, 02:38 PM

dontriston
This is a known, and already solved bug in 2.0.12.beta
Please see http://code.google.com/p/prs-plus/issues/detail?id=120

dontriston · 08-31-2011, 06:29 PM

Thank you and sorry.
I´m going to solve it.
Bye!

VICTORSJG · 09-02-2011, 02:55 PM

The quisvir's repository (http://code.google.com/r/quisvir-1/source/list) has an interesting functions just made for him, i don't know is it posible to merge with the prs plus repository?

thanks

Mark Nord · 09-02-2011, 03:21 PM

Victor,

so Shura1oplot has, e.g. support for *.RAR and *.ZIP archives. (If his unpacker-binaries will work with our PRS-505, this had to be checked, this could be a great enhancement to browse-folder, or the planed file-manager)

After some more developing and testing I assume kartu will merge some or all of this efforts into the main-project.
Regards
Mark

BenChen · 09-03-2011, 12:25 PM

Quote:

Originally Posted by VICTORSJG

The quisvir's repository (http://code.google.com/r/quisvir-1/source/list) has an interesting functions just made for him, i don't know is it posible to merge with the prs plus repository?

thanks

Hi Victor,

Some of quisvir's additions have already been ported to the main repository. They have been added to Marc's ViewerSettings_x50. I have also added those that apply to the 600 to ViewerSettings_600.

The BookManagement addon has not yet been included.

Sincerely,
Ben.

surquizu · 09-06-2011, 05:47 AM

Quote:

Originally Posted by surquizu

Hi, Kartu.

Here I uploaded the files for translation prs+ x50 to catalan for inclusion into the next version if is possible.

translated by jonsy

thanks

Kartu, You remember the Catalan translation for x50?

Post #2301 http:// https://www.mobileread.com/fo...postcount=2301

Thanks

kartu · 09-06-2011, 06:18 AM

surquizu
No, thanks for reminding. Added issue #162

BenChen · 09-06-2011, 10:31 AM

Hi everyone,

Yesterday, after copying across a new PRSPInstaller to my 600, instead of doing a shutdown I accidentally clicked "Restore Defaults" and said "Yes". So my home page was reset to the default layout. I then did a shutdown. After the reboot, PRS+ restored my home page to what it should be. But my reader took ages to finish the boot up process, much longer than previously. And now, every time I connect my 600 to the computer, it takes ages to finish the loading process after disconnecting.

Is there something I can do to get it back to the way it was?

Sincerely,
Ben.

kartu · 09-06-2011, 10:37 AM

I'd try another full shutdown Ben, or, possibly, a reset as well if simple shutdown didn't help.

DrMoze · 09-06-2011, 02:49 PM

Probably a dumb question, but searching for a while turned up nothing so: I finally managed to flash my 300 with the latest PRS+. How do I load Russian fb2 books? Reader Library won't transfer when I drag the file from pc folder to Reader tab; tried copying file directly to 'books' folder on the Reader but it doesn't show up. PRS+ website didn't have the answer anywhere obvious. Anybody? Thx!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using HD Folders as Collections on Sony PRS-505	fglaysher	Calibre	8	07-26-2010 09:55 PM
Enhanced Firmware for V3	keng2000	HanLin eBook	12	04-12-2010 09:30 AM
Poll: Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	70	02-18-2009 06:34 PM
Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	23	12-08-2008 06:56 AM
Sub folders in firmware v1.08	Prince Hal	Amazon Kindle	28	10-23-2008 03:20 PM

08-30-2011, 07:09 PM	#2404
quisvir Addict Posts: 238 Karma: 6875 Join Date: Feb 2009 Location: Netherlands Device: Kindle PW2	Problem solved! I found a way around the assets.xml files, and changed the terminology to the 'new' flag. New revision has been pushed (assets files are in the new rev as well, because I didn't know how to restore them to the original versions in another way).

08-31-2011, 01:59 PM	#2405
dontriston Connoisseur Posts: 57 Karma: 500 Join Date: Jun 2009 Location: Spain Device: Sony prs 600	Hello again. I know is very later, but I have found a very bad bug yesterday. If you select the Oxford Spanish Dictionary (ES-EN), you can look for a definition into a book, but if you want type a word, it´s impossible, the keyboard is missing!!! Do you know this bug, Kartu? Do you know any solution for spanish users? Thank you very much. Yo do a big work.

08-31-2011, 02:38 PM	#2406
Mark Nord 2B \|\| !2B Posts: 852 Karma: 314486 Join Date: Feb 2010 Location: Austria Device: Sony PRS505/650/T1/tolino vision 5	dontriston This is a known, and already solved bug in 2.0.12.beta Please see http://code.google.com/p/prs-plus/issues/detail?id=120

08-31-2011, 06:29 PM	#2407
dontriston Connoisseur Posts: 57 Karma: 500 Join Date: Jun 2009 Location: Spain Device: Sony prs 600	Thank you and sorry. I´m going to solve it. Bye!

09-02-2011, 02:55 PM	#2408
VICTORSJG Addict Posts: 318 Karma: 1846 Join Date: Dec 2009 Device: PRS-505	The quisvir's repository (http://code.google.com/r/quisvir-1/source/list) has an interesting functions just made for him, i don't know is it posible to merge with the prs plus repository? thanks

09-02-2011, 03:21 PM	#2409
Mark Nord 2B \|\| !2B Posts: 852 Karma: 314486 Join Date: Feb 2010 Location: Austria Device: Sony PRS505/650/T1/tolino vision 5	Victor, so Shura1oplot has, e.g. support for .RAR and .ZIP archives. (If his unpacker-binaries will work with our PRS-505, this had to be checked, this could be a great enhancement to browse-folder, or the planed file-manager) After some more developing and testing I assume kartu will merge some or all of this efforts into the main-project. Regards Mark

09-06-2011, 06:18 AM	#2412
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	surquizu No, thanks for reminding. Added issue #162

09-06-2011, 10:31 AM	#2413
BenChen EPUB Metadata ****** Posts: 525 Karma: 26874 Join Date: Dec 2010 Device: Kobo Glo HD	Hi everyone, Yesterday, after copying across a new PRSPInstaller to my 600, instead of doing a shutdown I accidentally clicked "Restore Defaults" and said "Yes". So my home page was reset to the default layout. I then did a shutdown. After the reboot, PRS+ restored my home page to what it should be. But my reader took ages to finish the boot up process, much longer than previously. And now, every time I connect my 600 to the computer, it takes ages to finish the loading process after disconnecting. Is there something I can do to get it back to the way it was? Sincerely, Ben.

09-06-2011, 10:37 AM	#2414
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	I'd try another full shutdown Ben, or, possibly, a reset as well if simple shutdown didn't help.

09-06-2011, 02:49 PM	#2415
DrMoze Booknut Posts: 860 Karma: 2852 Join Date: Jul 2007 Location: West Palm Beach, Florida! Device: Sony Reader 500/505/300/350, Nook Glowlight Plus (6")	Probably a dumb question, but searching for a while turned up nothing so: I finally managed to flash my 300 with the latest PRS+. How do I load Russian fb2 books? Reader Library won't transfer when I drag the file from pc folder to Reader tab; tried copying file directly to 'books' folder on the Reader but it doesn't show up. PRS+ website didn't have the answer anywhere obvious. Anybody? Thx!