PRS+: Enhanced firmware for Sony Reader, Folders, Games & more - Page 154

VICTORSJG · 07-09-2011, 10:36 AM

Kartu, do you have an answer to the problem i commented in this post https://www.mobileread.com/forums/sho...postcount=2289?

kartu · 07-09-2011, 10:48 AM

Thanks, Ivy.

Quote:

Originally Posted by VICTORSJG

Kartu, do you have an answer to the problem i commented in this post https://www.mobileread.com/forums/sho...postcount=2289?

It is listed in issues.
I couldn't reproduce it yet, but I didn't have time to try all options.

Sweetpea · 07-10-2011, 11:59 AM

I just let my Sony run out of juice (ok, I kept forgetting to plug it in!) and when I charged it again, I noticed my PRS+ was gone. However, when I ran the installer again, it said it was still there...

A force install did resolve the issue, so I'm only posting this as a notice...

kartu · 07-10-2011, 12:05 PM

Quote:

Originally Posted by Sweetpea

I just let my Sony run out of juice (ok, I kept forgetting to plug it in!) and when I charged it again, I noticed my PRS+ was gone. However, when I ran the installer again, it said it was still there...

A force install did resolve the issue, so I'm only posting this as a notice...

Reinstall wasn't necessary. It's "safe mode", if reader is connected to USB during boot, PRS+ doesn't start. Restart would suffice.

By the way it is mentioned in installer for x50-s models, right at the end of the installation.

VICTORSJG · 07-10-2011, 01:17 PM

Kartu, could you send me write-rights to edit file lang.ods?

thanks

surquizu · 07-10-2011, 02:28 PM

Hi, Kartu.

Here I uploaded the files for translation prs+ x50 to catalan for inclusion into the next version if is possible.

translated by jonsy

thanks

kartu · 07-10-2011, 06:39 PM

VICTORSJG
There are more than enough translators at the moment.

surquizu
For which model is it? 950 certainly has it's own strings. Not sure if 350/650 are the same.

surquizu · 07-10-2011, 06:43 PM

Quote:

Originally Posted by kartu

surquizu
For which model is it? 950 certainly has it's own strings. Not sure if 350/650 are the same.

For 350 and 650

Sweetpea · 07-11-2011, 06:09 AM

Quote:

Originally Posted by kartu

Reinstall wasn't necessary. It's "safe mode", if reader is connected to USB during boot, PRS+ doesn't start. Restart would suffice.

By the way it is mentioned in installer for x50-s models, right at the end of the installation.

That's good to know for my upcoming holiday (as I can't charge the Sony using my car charger, I might run out of juice before I reach a wall charger

)

And you don't expect me to read and remember the last bit of the installation, do you!

kartu · 07-11-2011, 06:12 AM

Thanks, surquizu.

Quote:

Originally Posted by Sweetpea

And you don't expect me to read and remember the last bit of the installation, do you!

Erm, considering installation is short, there isn't much to read, and those words are actually highlited...

BenChen · 07-11-2011, 08:55 AM

Hi kartu,
A couple of the English strings for StandbyImage are slightly misleading. Would you like me to correct them (which means I will need write-access), or should I send the strings to you?
Sincerely,
Ben.

Mark Nord · 07-11-2011, 11:55 AM

Hi Ben,

I've changed the online version of lang.ods according your suggestions.
Regards
Mark

BenChen · 07-12-2011, 08:52 AM

Quote:

Originally Posted by Mark Nord

Hi Ben,

I've changed the online version of lang.ods according your suggestions.
Regards
Mark

Thanks, Mark! I just wanted the English strings fixed before too many people did their translations.

Sincerely,
Ben.

VICTORSJG · 07-12-2011, 09:07 AM

What kind of pictures format it's posible to use on standby image?

Mark Nord · 07-12-2011, 11:34 AM

I would say every format the reader is capable to show in "Pictures"

For sure *.jgp and *.png are supported.
Graphic will be scaled, so no need for a special resolution. But 600x800 will work best.

PS: this is specifically for PRS 300/505 (600) and custom build firmware from current repository.
Standby-Pictures should be placed in (Data)/database/system//PRSPlus/wallpaper (where Data is the root of internal memory)
and if used with landscape-mode, rotated versions in wallpaper/landscape/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using HD Folders as Collections on Sony PRS-505	fglaysher	Calibre	8	07-26-2010 10:55 PM
Enhanced Firmware for V3	keng2000	HanLin eBook	12	04-12-2010 10:30 AM
Poll: Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	70	02-18-2009 07:34 PM
Sony Reader PRS-505 upgrade to Sony PRS-700	Kris777	Sony Reader	23	12-08-2008 07:56 AM
Sub folders in firmware v1.08	Prince Hal	Amazon Kindle	28	10-23-2008 04:20 PM

07-09-2011, 10:36 AM	#2296
VICTORSJG Addict Posts: 318 Karma: 1846 Join Date: Dec 2009 Device: PRS-505	Kartu, do you have an answer to the problem i commented in this post https://www.mobileread.com/forums/sho...postcount=2289?

07-10-2011, 11:59 AM	#2298
Sweetpea Grand Sorcerer Posts: 9,707 Karma: 32763414 Join Date: Dec 2008 Location: Krewerd Device: Pocketbook Inkpad 4 Color; Samsung Galaxy Tab S6	I just let my Sony run out of juice (ok, I kept forgetting to plug it in!) and when I charged it again, I noticed my PRS+ was gone. However, when I ran the installer again, it said it was still there... A force install did resolve the issue, so I'm only posting this as a notice...

07-10-2011, 01:17 PM	#2300
VICTORSJG Addict Posts: 318 Karma: 1846 Join Date: Dec 2009 Device: PRS-505	Kartu, could you send me write-rights to edit file lang.ods? thanks

07-10-2011, 06:39 PM	#2302
kartu PRS+ author Posts: 1,637 Karma: 2446233 Join Date: Dec 2007 Device: Sony PRS-300, 505, 600, 650, 950	VICTORSJG There are more than enough translators at the moment. surquizu For which model is it? 950 certainly has it's own strings. Not sure if 350/650 are the same.

07-11-2011, 08:55 AM	#2306
BenChen EPUB Metadata ****** Posts: 526 Karma: 26874 Join Date: Dec 2010 Device: Kobo Glo HD	Hi kartu, A couple of the English strings for StandbyImage are slightly misleading. Would you like me to correct them (which means I will need write-access), or should I send the strings to you? Sincerely, Ben.

07-11-2011, 11:55 AM	#2307
Mark Nord 2B \|\| !2B Posts: 854 Karma: 327896 Join Date: Feb 2010 Location: Austria Device: Sony PRS505/650/T1/tolino vision 5	Hi Ben, I've changed the online version of lang.ods according your suggestions. Regards Mark

07-12-2011, 09:07 AM	#2309
VICTORSJG Addict Posts: 318 Karma: 1846 Join Date: Dec 2009 Device: PRS-505	What kind of pictures format it's posible to use on standby image?

07-12-2011, 11:34 AM	#2310
Mark Nord 2B \|\| !2B Posts: 854 Karma: 327896 Join Date: Feb 2010 Location: Austria Device: Sony PRS505/650/T1/tolino vision 5	I would say every format the reader is capable to show in "Pictures" For sure .jgp and .png are supported. Graphic will be scaled, so no need for a special resolution. But 600x800 will work best. PS: this is specifically for PRS 300/505 (600) and custom build firmware from current repository. Standby-Pictures should be placed in (Data)/database/system//PRSPlus/wallpaper (where Data is the root of internal memory) and if used with landscape-mode, rotated versions in wallpaper/landscape/