Hang - Page 2

Solicitous · 05-01-2011, 08:42 AM

Well if it won't work without the USB cable I would charge the battery and go from there. Chances are the battery could be getting close to flat because it essentially was running for the last couple of days after the failed firmware update.

With the sd card I would boot up the reader without it plugged in and once booted I would then plug it in and see if it will pick it up

UchihaNaru · 05-01-2011, 08:45 AM

I think my battery spoilt.. I removed it by plying it out.. didn't think that damage it.. but.. now.. it wouldn't work on battery... And when I shut down, I can't turn it on using the power button. And I can't update firmware using the power + page turn (right) button. Sigh..

Thanks for all the help Solicitous, I need to sleep now =X Will leave it to charge overnight and see how it goes. Hopefully it will work well! Will report back ^^

Solicitous · 05-01-2011, 08:47 AM

Just plug the shutdown reader into the ac charger and it will start up

DaleDe · 05-01-2011, 08:59 PM

Quote:

Originally Posted by UchihaNaru

Hi thank. I just tried the reset + page turn and it does the same thing, it restarts back to the startup page..

I have tried the battery removal and it didnt work as well..

Is it impossible to shut it down?

Just because there is data on the screen it does not mean that the unit has not shut down. Removing the power will stop the reader cold. It may be that it is really off and will not power up. The screen does not need power to have the same fixed image on it.

Be sure the battery is charged or plug it into a charger for a while and then see if there is any change in the unit screen or does the light blink.

Dale

UchihaNaru · 05-02-2011, 01:06 AM

Hiya, I managed to fix my battery (took it out again and tweek it about) and now it works. But the thing is, the initial hanging problem is still there.. I think my ebook reader is pretty much gone =X

DaleDe · 05-02-2011, 01:08 AM

Quote:

Originally Posted by UchihaNaru

Hiya, I managed to fix my battery (took it out again and tweek it about) and now it works. But the thing is, the initial hanging problem is still there.. I think my ebook reader is pretty much gone =X

With the battery fixed and the unit plugged into the charger try and reload the firmware. I suspect you got a corrupt load. It is worth a shot anyway before you give up.

Dale

Solicitous · 05-02-2011, 06:14 AM

Quote:

Originally Posted by DaleDe

With the battery fixed and the unit plugged into the charger try and reload the firmware. I suspect you got a corrupt load. It is worth a shot anyway before you give up.

Dale

I agree with this. Reading your previous post you had trouble with your PP not reading your SD card. I would delete and copy back on a fresh firmware image and try the update again.

theducks · 05-02-2011, 10:47 AM

Charge it for 12 to 14 hours with the wall charger.
Low battery/power does strange things.
Computer USB ports may not have enough power to charge (especially, USB Hubs).

Astak does have spare batteries for sale (If you can get the 'Person' who handles the EZReader. I called about 09:30, I am in the same County, and got 'call later'. They have no clue on customer support. That is 12:30 on the East Coast

and no support person?)

UchihaNaru · 05-02-2011, 10:53 AM

The reading SD card thing is fine actually. But now, I can't reupdate my firmware by pressing the right page button and power button... So I pressed the lower button and power as suggested by Solicitous various posts above...

And as before I have Invalid Block Number 12 and it went though all the stages properly and rebooted nicely. But I can't do the reupdate when I tried again. And so I repeated the 'lower button + power button' procedure and it showed the same problem...

And the wierdest thing now is.. I can't turn on the reader using the power button. I hav to press the 'lower button + power button' (albeit only a quick press not a prolonged hold) to turn it on.

Its all screwed.. Sigh..

DaleDe · 05-02-2011, 11:16 AM

It would seem you need to reformat the memory. Back everything up and then hook to computer. You can then run a diskcheck to see if you can mark the block bad or reformat the entire memory. This may restore your device.

Dale

UchihaNaru · 05-03-2011, 03:19 AM

hi im a noob at computer stuff.. So when you say format are you saying to format the reader? or the sd card? Or both? My Ebook reader was reflected on my mac osx disk utility as a Linux file-stor gadget media.

Erase - format. What should I format it to? MS-Dos (fat) ?

Solicitous · 05-03-2011, 06:49 AM

The internal memory should be formatted to FAT16. I don't believe Mac will format through the GUI tools to a FAT16 (only FAT32).

http://forums.adafruit.com/viewtopic.php?f=31&t=7108 has a good post on how to format a drive as FAT16. Alternatively if you could find a Windows 7 machine and format it that way.

UchihaNaru · 05-04-2011, 06:10 AM

The SD card has to be in Fat16 too?

Solicitous · 05-04-2011, 07:45 AM

Quote:

Originally Posted by UchihaNaru

The SD card has to be in Fat16 too?

Well for firmware updates they say no larger than 2GB so I would assume it would need to be FAT16, however once up and running the SD card can be either FAT16 or FAT32 to be read by the Pocket Pro.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
360 Device Hang	fidaraya	PocketBook	3	02-25-2011 04:11 AM
sell me the rope you're going to hang me with	cjottawa	General Discussions	10	11-26-2010 12:04 PM
Seriously thoughtful where else do you hang out?	kindlekitten	Lounge	24	12-12-2009 08:05 PM
Unutterably Silly If this guy doesn't hang out here ...	RickyMaveety	Lounge	7	07-16-2009 02:10 PM
crash/hang	jsc	iRex	5	07-29-2006 06:19 AM

05-01-2011, 08:42 AM	#16
Solicitous Wizard Posts: 1,434 Karma: 1525776 Join Date: Aug 2009 Location: TAS, Australia Device: Astak Pocket Pro (Black), 2 x Kindle WiFi (Graphite), iPod Touch 4G	Well if it won't work without the USB cable I would charge the battery and go from there. Chances are the battery could be getting close to flat because it essentially was running for the last couple of days after the failed firmware update. With the sd card I would boot up the reader without it plugged in and once booted I would then plug it in and see if it will pick it up

05-01-2011, 08:45 AM	#17
UchihaNaru Connoisseur Posts: 70 Karma: 64 Join Date: Sep 2009 Device: Astak Pocket Pro	I think my battery spoilt.. I removed it by plying it out.. didn't think that damage it.. but.. now.. it wouldn't work on battery... And when I shut down, I can't turn it on using the power button. And I can't update firmware using the power + page turn (right) button. Sigh.. Thanks for all the help Solicitous, I need to sleep now =X Will leave it to charge overnight and see how it goes. Hopefully it will work well! Will report back ^^

05-01-2011, 08:47 AM	#18
Solicitous Wizard Posts: 1,434 Karma: 1525776 Join Date: Aug 2009 Location: TAS, Australia Device: Astak Pocket Pro (Black), 2 x Kindle WiFi (Graphite), iPod Touch 4G	Just plug the shutdown reader into the ac charger and it will start up

05-02-2011, 01:06 AM	#20
UchihaNaru Connoisseur Posts: 70 Karma: 64 Join Date: Sep 2009 Device: Astak Pocket Pro	Hiya, I managed to fix my battery (took it out again and tweek it about) and now it works. But the thing is, the initial hanging problem is still there.. I think my ebook reader is pretty much gone =X

05-02-2011, 10:47 AM	#23
theducks Well trained by Cats Posts: 31,249 Karma: 61360164 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	Charge it for 12 to 14 hours with the wall charger. Low battery/power does strange things. Computer USB ports may not have enough power to charge (especially, USB Hubs). Astak does have spare batteries for sale (If you can get the 'Person' who handles the EZReader. I called about 09:30, I am in the same County, and got 'call later'. They have no clue on customer support. That is 12:30 on the East Coast and no support person?)

05-02-2011, 10:53 AM	#24
UchihaNaru Connoisseur Posts: 70 Karma: 64 Join Date: Sep 2009 Device: Astak Pocket Pro	The reading SD card thing is fine actually. But now, I can't reupdate my firmware by pressing the right page button and power button... So I pressed the lower button and power as suggested by Solicitous various posts above... And as before I have Invalid Block Number 12 and it went though all the stages properly and rebooted nicely. But I can't do the reupdate when I tried again. And so I repeated the 'lower button + power button' procedure and it showed the same problem... And the wierdest thing now is.. I can't turn on the reader using the power button. I hav to press the 'lower button + power button' (albeit only a quick press not a prolonged hold) to turn it on. Its all screwed.. Sigh..

05-02-2011, 11:16 AM	#25
DaleDe Grand Sorcerer Posts: 11,470 Karma: 13095790 Join Date: Aug 2007 Location: Grass Valley, CA Device: EB 1150, EZ Reader, Literati, iPad 2 & Air 2, iPhone 7	It would seem you need to reformat the memory. Back everything up and then hook to computer. You can then run a diskcheck to see if you can mark the block bad or reformat the entire memory. This may restore your device. Dale

05-03-2011, 03:19 AM	#26
UchihaNaru Connoisseur Posts: 70 Karma: 64 Join Date: Sep 2009 Device: Astak Pocket Pro	hi im a noob at computer stuff.. So when you say format are you saying to format the reader? or the sd card? Or both? My Ebook reader was reflected on my mac osx disk utility as a Linux file-stor gadget media. Erase - format. What should I format it to? MS-Dos (fat) ?

05-03-2011, 06:49 AM	#27
Solicitous Wizard Posts: 1,434 Karma: 1525776 Join Date: Aug 2009 Location: TAS, Australia Device: Astak Pocket Pro (Black), 2 x Kindle WiFi (Graphite), iPod Touch 4G	The internal memory should be formatted to FAT16. I don't believe Mac will format through the GUI tools to a FAT16 (only FAT32). http://forums.adafruit.com/viewtopic.php?f=31&t=7108 has a good post on how to format a drive as FAT16. Alternatively if you could find a Windows 7 machine and format it that way.

05-04-2011, 06:10 AM	#28
UchihaNaru Connoisseur Posts: 70 Karma: 64 Join Date: Sep 2009 Device: Astak Pocket Pro	The SD card has to be in Fat16 too?