Please help me, i cant upgrade firmware!

messenger · 07-21-2010, 04:39 PM

Hello,

please can someone help,i tried to upgrade my hanlin V3+ firmware excactly like they say on forum and FAQ on their web and my device never find the .bin file on the sd card

.
i tried many formats FAT,FAT 32,4GB card,1GB card and always same result, the reader finds the card just fine but never the firmware file.

Anybody can help me?I do hold the + and start the reader....then the card is found and then no firmware found please press any key to reboot. thats it.

thank you

messenger

keng2000 · 07-22-2010, 03:05 AM

1. What is your firmware name? Have you uncompressed it?
2. Try to use blank SDCard for update.

wap502 · 07-22-2010, 03:41 AM

Try this firmware
http://61.181.14.184:8088/RetailWeb/...2CN.100510.rar

messenger · 07-22-2010, 04:35 AM

the firware is v2.10-CS_20090820 for my language,and the other i tried is Firmware v2.20-EN_20091124.
i use formated blank sd card and sdhc card.the firmware is in .bin format.

Stormchild · 07-22-2010, 08:57 AM

I think you will find those firmwares are for the original V3 not the V3+.

messenger · 07-22-2010, 09:33 AM

Quote:

Originally Posted by Stormchild

I think you will find those firmwares are for the original V3 not the V3+.

You might be right, how do i find out for what version it is?Which update is for V3+?Official and unofficial?

thank you for your time!!

Stormchild · 07-22-2010, 11:27 AM

Sorry, I can't help. I never go to the Hanlin site. I know from the dates. The one wap502 suggested is probably correct.

Quote:

Originally Posted by wap502

Try this firmware
http://61.181.14.184:8088/RetailWeb/...2CN.100510.rar

messenger · 07-22-2010, 02:48 PM

Quote:

Originally Posted by Stormchild

Sorry, I can't help. I never go to the Hanlin site. I know from the dates. The one wap502 suggested is probably correct.

well i have this one already in my reader,the one wap502 suggested.that is why i was asking if there is newer or better firmware.

thanks

keng2000 · 07-23-2010, 01:58 AM

the 2009 date indicated it is V3, not v3+, Jinke has no new v3+ yet.

You can get the v3+ firmware from BEBOOK, www.mybebook.com

messenger · 07-23-2010, 03:07 AM

Quote:

Originally Posted by keng2000

the 2009 date indicated it is V3, not v3+, Jinke has no new v3+ yet.

You can get the v3+ firmware from BEBOOK, www.mybebook.com

thank you very much!

messenger · 07-23-2010, 09:49 AM

ok guys,i did it,you were right the firmwares i had before werent for V3+!i used the bebook 2010 edition and updated.Thanks for your help.BTW iam very happy with my Hanlin,very good batery life and nice screen,good control for fliping pages.Just fine for reading.have a nice day to all!

07-21-2010, 04:39 PM	#1
messenger Member Posts: 21 Karma: 10 Join Date: Jun 2010 Location: Czech Republic,Prague Device: Hanlin V3+	Please help me, i cant upgrade firmware! Hello, please can someone help,i tried to upgrade my hanlin V3+ firmware excactly like they say on forum and FAQ on their web and my device never find the .bin file on the sd card . i tried many formats FAT,FAT 32,4GB card,1GB card and always same result, the reader finds the card just fine but never the firmware file. Anybody can help me?I do hold the + and start the reader....then the card is found and then no firmware found please press any key to reboot. thats it. thank you messenger

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Opus I can't upgrade firmware	charex	Bookeen	17	09-21-2011 09:14 AM
iLiad How can I upgrade my firmware to 2.12?	npceodp	iRex	1	08-30-2010 04:03 PM
PRS-500 Upgrade firmware	ambertape	Sony Reader Dev Corner	0	12-15-2009 08:04 AM
Firmware Upgrade Available!	scottcstoness	Sony Reader	65	08-06-2007 11:13 PM
Will there be another firmware upgrade?	MacBeezle	Sony Reader	50	07-08-2007 02:47 PM

07-22-2010, 03:05 AM	#2
keng2000 Researcher and Consultant Posts: 210 Karma: 364 Join Date: Nov 2008 Location: Bangkok, THAILAND Device: MACBOOKPRO17" HP2400TX SONYUX27	1. What is your firmware name? Have you uncompressed it? 2. Try to use blank SDCard for update.

07-22-2010, 03:41 AM	#3
wap502 Member Posts: 16 Karma: 12 Join Date: Jun 2010 Device: v3+	Try this firmware http://61.181.14.184:8088/RetailWeb/...2CN.100510.rar

07-22-2010, 04:35 AM	#4
messenger Member Posts: 21 Karma: 10 Join Date: Jun 2010 Location: Czech Republic,Prague Device: Hanlin V3+	the firware is v2.10-CS_20090820 for my language,and the other i tried is Firmware v2.20-EN_20091124. i use formated blank sd card and sdhc card.the firmware is in .bin format.

07-22-2010, 08:57 AM	#5
Stormchild Evangelist Posts: 466 Karma: 878943 Join Date: Jan 2009 Location: Cornwall UK Device: BeBook 1. BeBook Mini. BeBook Neo and Club. BeBook Live. BeeBook Pure.	I think you will find those firmwares are for the original V3 not the V3+.

07-23-2010, 01:58 AM	#9
keng2000 Researcher and Consultant Posts: 210 Karma: 364 Join Date: Nov 2008 Location: Bangkok, THAILAND Device: MACBOOKPRO17" HP2400TX SONYUX27	the 2009 date indicated it is V3, not v3+, Jinke has no new v3+ yet. You can get the v3+ firmware from BEBOOK, www.mybebook.com

07-23-2010, 09:49 AM	#11
messenger Member Posts: 21 Karma: 10 Join Date: Jun 2010 Location: Czech Republic,Prague Device: Hanlin V3+	ok guys,i did it,you were right the firmwares i had before werent for V3+!i used the bebook 2010 edition and updated.Thanks for your help.BTW iam very happy with my Hanlin,very good batery life and nice screen,good control for fliping pages.Just fine for reading.have a nice day to all!