Cybook Firmware on the Cooler?

luqmaninbmore · 08-04-2009, 04:44 PM

Greetings,

Does anyone know if the Cybook Gen3 firmware will run on the Cool-er Reader or vice versa? The recent Cybooks and the Cool-ers are both Netronix EB-600s correct? Or are there significant architectual differences/proprietary blocks that would keep one from swapping firmware?

Soc-psychologist · 08-05-2009, 03:20 AM

I like the Cool-er firmware better.

Godzil · 08-05-2009, 08:49 AM

No it's not (officially) possible nor the reverse (ie install the netronix soft on the Cybook)

eBookLuke · 07-03-2010, 03:18 AM

Quote:

Originally Posted by luqmaninbmore

Greetings, Does anyone know if the Cybook Gen3 firmware will run on the Cool-er Reader or vice versa? The recent Cybooks and the Cool-ers are both Netronix EB-600s correct? Or are there significant architectual differences/proprietary blocks that would keep one from swapping firmware?

HI,

there are some differences in the Cybook hardware. Seems that there are more components in Cybook rather than in Cool-ER/Netronix/Shinebook.

It is possible to load the Shinebook firmware in the Cool-ER and viceversa, but the Cybook is different.

Anyway, I suppose that the problem is not only in the hardware, but in the loader firmware.

Luke

kycrout · 07-07-2010, 04:09 AM

Excuse me butting in ...

given the cool-er can run its own firmware or shinebook. (Before I try) which is the better in your opinion *or anyone's?

Thanks!

Godzil · 07-07-2010, 07:32 AM

it's the same thing

kycrout · 07-07-2010, 08:01 AM

thanks for the reply

Atomic · 07-10-2010, 12:34 AM

You can put the PocketBook 301+ firmware into Cool'er

kycrout · 07-12-2010, 02:36 AM

Quote:

Originally Posted by Atomic

You can put the PocketBook 301+ firmware into Cool'er

Is it any better?

kycrout · 07-15-2010, 04:14 AM

Right the 301+ firmware seems a LOT better

Ive downloaded both but
p301 is a bin file whilst the cool-er is loads of smaller files

how does one get the restore going?

Many thanks

in advance

codeMonkey · 07-15-2010, 06:36 AM

I've been thinking about putting the Booq firmware on my reader at some point in the future. May try out the pocketbook one too - Let us know if it's any good.

The pocketbook instructions here may help.

kycrout · 07-15-2010, 06:56 AM

Thanks for the info. .. yep seen it

If I try the pocketbook bin file, while using the cool-er upgrade process ... it bricks the device (can be recovered though)

Bascially I think to get the pb301+ firmare on I need the files "unpacked" since thats what the cool-er upgrade is expecting OR I need a different way of applying the bin file

Godzil · 07-15-2010, 07:51 AM

How do you managed to brick your device by using the PB bin file ?

It's impossible to install the PB firmware directly on any EB100/EB600 device without some internal knownledge of the device. PocketBook use their own firmware upgrade process like do Bookeen and they are NOT compatible with Netronix updates. (in fact all three are incompatibles between them) and you can't use one of the update on another branded device.

If you managed to brick your device, there is only way -> Customer service, and be prepared to need to pay to recover it, I doubt they will be happy to see people trying to hack their device with another firmware.

kycrout · 07-15-2010, 08:00 AM

bricking easy

1) put the pocketbook bin file on an sd card
2) press enter / 3rd button down and reset

Tries to upgrade (starts some process) obviously does not find what it wants and stops

reset the device get only three squares and it stops

then put proper cool-er firmware on and upgrade again .. then all ok!

Atomic .. look forward to your insights

godzil ... I believe cool-er is now bankrupt so im sure they'll not mind

Godzil · 07-16-2010, 10:51 AM

Ho I understand, this is not due to your pocketbook firmware, but a "feature" of the netronix firmware. NEVER try to boot a netronix fimrware with the SD card inserted and pressing the Enter & 3rd button or you will semi brick your device. This is a "feature"...

08-04-2009, 04:44 PM	#1
luqmaninbmore Da'i Posts: 1,144 Karma: 1217499 Join Date: Oct 2008 Location: Baltimore Device: Toshiba Thrive, Kobo Touch, Kindle 1, Aluratek Libre, T-Mobile Comet	Cybook Firmware on the Cooler? Greetings, Does anyone know if the Cybook Gen3 firmware will run on the Cool-er Reader or vice versa? The recent Cybooks and the Cool-ers are both Netronix EB-600s correct? Or are there significant architectual differences/proprietary blocks that would keep one from swapping firmware?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New firmware Cool-er COOLER-vfat-eb600em-0203 5th February	juantxu3	Interead COOL-ER	65	01-29-2011 04:10 PM
CyBook/Firmware jokes	gerraldo	Bookeen	8	06-04-2009 09:14 AM
Cooler - Looks like there's a Cybook inside...	beschuit	Bookeen	3	05-27-2009 01:03 PM
New Cybook - old firmware?	Pulp	Bookeen	19	08-21-2008 11:03 AM

08-05-2009, 03:20 AM	#2
Soc-psychologist Member Posts: 22 Karma: 10 Join Date: Jul 2009 Location: Helsinki, Europe Device: Cybook Gen 3, Cybook Opus, N91	I like the Cool-er firmware better.

08-05-2009, 08:49 AM	#3
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	No it's not (officially) possible nor the reverse (ie install the netronix soft on the Cybook)

07-07-2010, 04:09 AM	#5
kycrout Member Posts: 16 Karma: 10 Join Date: Dec 2007 Device: COOL-ER	Excuse me butting in ... given the cool-er can run its own firmware or shinebook. (Before I try) which is the better in your opinion *or anyone's? Thanks!

07-07-2010, 07:32 AM	#6
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	it's the same thing

07-07-2010, 08:01 AM	#7
kycrout Member Posts: 16 Karma: 10 Join Date: Dec 2007 Device: COOL-ER	thanks for the reply

07-10-2010, 12:34 AM	#8
Atomic Junior Member Posts: 1 Karma: 10 Join Date: Mar 2010 Device: Pocketbook 301+	You can put the PocketBook 301+ firmware into Cool'er

07-15-2010, 04:14 AM	#10
kycrout Member Posts: 16 Karma: 10 Join Date: Dec 2007 Device: COOL-ER	Right the 301+ firmware seems a LOT better Ive downloaded both but p301 is a bin file whilst the cool-er is loads of smaller files how does one get the restore going? Many thanks in advance

07-15-2010, 06:36 AM	#11
codeMonkey Zealot Posts: 125 Karma: 26758 Join Date: Aug 2009 Location: UK Device: Cool-ER (running pocketbook firmware), Nokia N800, Nokia N900	I've been thinking about putting the Booq firmware on my reader at some point in the future. May try out the pocketbook one too - Let us know if it's any good. The pocketbook instructions here may help.

07-15-2010, 06:56 AM	#12
kycrout Member Posts: 16 Karma: 10 Join Date: Dec 2007 Device: COOL-ER	Thanks for the info. .. yep seen it If I try the pocketbook bin file, while using the cool-er upgrade process ... it bricks the device (can be recovered though) Bascially I think to get the pb301+ firmare on I need the files "unpacked" since thats what the cool-er upgrade is expecting OR I need a different way of applying the bin file

07-15-2010, 07:51 AM	#13
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	How do you managed to brick your device by using the PB bin file ? It's impossible to install the PB firmware directly on any EB100/EB600 device without some internal knownledge of the device. PocketBook use their own firmware upgrade process like do Bookeen and they are NOT compatible with Netronix updates. (in fact all three are incompatibles between them) and you can't use one of the update on another branded device. If you managed to brick your device, there is only way -> Customer service, and be prepared to need to pay to recover it, I doubt they will be happy to see people trying to hack their device with another firmware.

07-15-2010, 08:00 AM	#14
kycrout Member Posts: 16 Karma: 10 Join Date: Dec 2007 Device: COOL-ER	bricking easy 1) put the pocketbook bin file on an sd card 2) press enter / 3rd button down and reset Tries to upgrade (starts some process) obviously does not find what it wants and stops reset the device get only three squares and it stops then put proper cool-er firmware on and upgrade again .. then all ok! Atomic .. look forward to your insights godzil ... I believe cool-er is now bankrupt so im sure they'll not mind

07-16-2010, 10:51 AM	#15
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	Ho I understand, this is not due to your pocketbook firmware, but a "feature" of the netronix firmware. NEVER try to boot a netronix fimrware with the SD card inserted and pressing the Enter & 3rd button or you will semi brick your device. This is a "feature"...