Metadata correct in Calibre, but not on Kindle

spygrl · 07-10-2010, 08:35 PM

Hi,

I am having an issue with several books that I hope is something simple to fix.

When I look at my books in the Calibre software I have correct metadata information... Author Title etc.

So at that point I upload to my Kindle and those books have the title very odd, looking much like this

MONTGOMERY_Anne of Green Gables

with no author.

I tried deleting the files from the Kindle and tried deleting them from the library and readding them... neither method worked.

I'm not a very technologically advanced person, so keep that in mind when responding!

Thanks!

kovidgoyal · 07-11-2010, 11:21 AM

convert the book from mobi to mobi in calibre and resend.

spygrl · 07-11-2010, 10:50 PM

Quote:

Originally Posted by kovidgoyal

convert the book from mobi to mobi in calibre and resend.

Such a simple fix!

When I went to convert them, I realized that all the files I was having issues with were prc files.

Thanks so much!

bear4hunter · 07-12-2010, 02:35 AM

Indeed simple, at least it works for correcting the metadata.
But after the conversion, the Start_Reading anchor is gone, the book opens with the first page after the coverpage... Other anchors like TOC work fine.

spygrl · 07-16-2010, 12:44 AM

Quote:

Originally Posted by bear4hunter

Indeed simple, at least it works for correcting the metadata.
But after the conversion, the Start_Reading anchor is gone, the book opens with the first page after the coverpage... Other anchors like TOC work fine.

Good to know.. I hadn't started reading any of them at that point, so I didn't notice.

Thanks for the information.

bear4hunter · 07-18-2010, 12:29 PM

I have another solution for changing the title, without using calibre and thus messing around with the special anchors: now, I'm using the mobi2mobi script found here, but I use it in the console window (command prompt) instead of with the gui - works like a charm.

Carlj · 08-01-2010, 01:22 AM

Hello Everyone,

My question pertains to the sequence of the converted/uploaded files to the e-reader (kindle in this case). Since the cover page (book picture in .jpg) is uploaded with the rest of the pages I'm wondering why is it that more times than not the picture is not the first file read by the e-reader. It seems to skip the cover and go to the first text page. A minor but annoying problem. I'm usually converting (using Calibre only) from epub or lit/rtf to MOBI. Thanks for any help you can lend.

DoctorOhh · 08-01-2010, 04:02 AM

Quote:

Originally Posted by Carlj

My question pertains to the sequence of the converted/uploaded files to the e-reader (kindle in this case). Since the cover page (book picture in .jpg) is uploaded with the rest of the pages I'm wondering why is it that more times than not the picture is not the first file read by the e-reader. It seems to skip the cover and go to the first text page. A minor but annoying problem. I'm usually converting (using Calibre only) from epub or lit/rtf to MOBI. Thanks for any help you can lend.

This seems to happen in the Kindle4PC application too. Often to see the cover in that app you must click previous or back from the page it defaults to.

On my Sony 505 the cover is always the first page I see.

kovidgoyal · 08-01-2010, 10:36 AM

MOBI is designed that way, by default it opens after the cover (I suppose the idea is to save you a page turn). IIRC it can be made to open at the cover but I haven't bothered changing the default behavior in calibre.

Carlj · 08-01-2010, 04:04 PM

To Kovidgoyal,

Do you think if I downloaded Sigil I could use that to define the order of files read in such a way that the jpg would be the first to appear by default? (Although I worry that I'll be spending more time learning programming than actually reading books

Also I don't know what you meant by "IIRC." On the other hand I wonder if, since K2 reads AZW, if I use that format as output would there be any difference in the read-order of the files?

By the way I just started the whole e-reading approach and luckily found and installed Calibre before I even received my e-reader. Glad I did because this is the best program I've seen for conversion and library organization. Simply amazing. Thanks

kovidgoyal · 08-01-2010, 04:18 PM

No you cant change this, without code changes in calibre.

dura · 08-02-2010, 11:44 AM

It also does this when I connect my ipad and point itunes to the calibre library and let itunes sync; it seems there are two sets of metadata?

kovidgoyal · 08-02-2010, 11:47 AM

Do not point itunes to the calibre library, metadata is never updated in the files in the files calibre library. Use the connect to itunes feature in calibre to send books to itunes.

GRiker · 08-02-2010, 12:12 PM

Quote:

Originally Posted by dura

It also does this when I connect my ipad and point itunes to the calibre library and let itunes sync; it seems there are two sets of metadata?

See the first post in this thread for instructions on using calibre with iTunes.

G

cybmole · 09-16-2010, 02:34 PM

Quote:

Originally Posted by kovidgoyal

convert the book from mobi to mobi in calibre and resend.

so let's say I have book in .mobi format, but the metadata is incomplete. I have to add to book to calibre, then use the edit or download metadata , then sort out a cover , & then I have to convert the book FROM mobi TO mobi to get that metadata inserted intot eh .mobi file.

seems daft that I have to convert the entirety of a perfectly good data file just to add metadate to it, and the conversion process is quite slow ( i.e. it seems like it;'s doing more than just adding metadata as it takes up to 1 minute on a fast core duo PC ) ?

07-10-2010, 08:35 PM	#1
spygrl Member Posts: 10 Karma: 10 Join Date: Jul 2010 Device: kindle 2	Metadata correct in Calibre, but not on Kindle Hi, I am having an issue with several books that I hope is something simple to fix. When I look at my books in the Calibre software I have correct metadata information... Author Title etc. So at that point I upload to my Kindle and those books have the title very odd, looking much like this MONTGOMERY_Anne of Green Gables with no author. I tried deleting the files from the Kindle and tried deleting them from the library and readding them... neither method worked. I'm not a very technologically advanced person, so keep that in mind when responding! Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
correct steps to move calibre portable to laptop	jomaweb	Calibre	1	01-31-2010 08:53 PM
Calibre did not detect correct memory partition for Sony PRS 300	Noritje	Calibre	4	12-11-2009 05:43 AM
Mobi to Kindle with correct metadata?	rex0810	Calibre	3	09-25-2009 05:36 PM
correct protocol for updating calibre	escapement	Calibre	1	04-25-2009 10:25 AM
Folders on Kindle, Calibre metadata question	jscris	Calibre	5	02-25-2009 02:43 PM

07-11-2010, 11:21 AM	#2
kovidgoyal creator of calibre Posts: 45,198 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	convert the book from mobi to mobi in calibre and resend.

07-12-2010, 02:35 AM	#4
bear4hunter Addict Posts: 248 Karma: 100148 Join Date: Jul 2010 Location: Germany, Munich Device: Kindle 3 & DX Graphite, PocketBook 302 & Pro 603	Indeed simple, at least it works for correcting the metadata. But after the conversion, the Start_Reading anchor is gone, the book opens with the first page after the coverpage... Other anchors like TOC work fine.

07-18-2010, 12:29 PM	#6
bear4hunter Addict Posts: 248 Karma: 100148 Join Date: Jul 2010 Location: Germany, Munich Device: Kindle 3 & DX Graphite, PocketBook 302 & Pro 603	I have another solution for changing the title, without using calibre and thus messing around with the special anchors: now, I'm using the mobi2mobi script found here, but I use it in the console window (command prompt) instead of with the gui - works like a charm.

08-01-2010, 01:22 AM	#7
Carlj Junior Member Posts: 6 Karma: 10 Join Date: Aug 2010 Device: Kindle	Hello Everyone, My question pertains to the sequence of the converted/uploaded files to the e-reader (kindle in this case). Since the cover page (book picture in .jpg) is uploaded with the rest of the pages I'm wondering why is it that more times than not the picture is not the first file read by the e-reader. It seems to skip the cover and go to the first text page. A minor but annoying problem. I'm usually converting (using Calibre only) from epub or lit/rtf to MOBI. Thanks for any help you can lend.

08-01-2010, 10:36 AM	#9
kovidgoyal creator of calibre Posts: 45,198 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	MOBI is designed that way, by default it opens after the cover (I suppose the idea is to save you a page turn). IIRC it can be made to open at the cover but I haven't bothered changing the default behavior in calibre.

08-01-2010, 04:04 PM	#10
Carlj Junior Member Posts: 6 Karma: 10 Join Date: Aug 2010 Device: Kindle	To Kovidgoyal, Do you think if I downloaded Sigil I could use that to define the order of files read in such a way that the jpg would be the first to appear by default? (Although I worry that I'll be spending more time learning programming than actually reading books Also I don't know what you meant by "IIRC." On the other hand I wonder if, since K2 reads AZW, if I use that format as output would there be any difference in the read-order of the files? By the way I just started the whole e-reading approach and luckily found and installed Calibre before I even received my e-reader. Glad I did because this is the best program I've seen for conversion and library organization. Simply amazing. Thanks

08-01-2010, 04:18 PM	#11
kovidgoyal creator of calibre Posts: 45,198 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	No you cant change this, without code changes in calibre.

08-02-2010, 11:44 AM	#12
dura Groupie Posts: 174 Karma: 1062434 Join Date: Oct 2006 Location: Netherlands Device: Kobo H2O (2th edition), Kindle PW11	It also does this when I connect my ipad and point itunes to the calibre library and let itunes sync; it seems there are two sets of metadata?

08-02-2010, 11:47 AM	#13
kovidgoyal creator of calibre Posts: 45,198 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Do not point itunes to the calibre library, metadata is never updated in the files in the files calibre library. Use the connect to itunes feature in calibre to send books to itunes.

Advert

Advert