Libra 2 Bricked device after update

Multivac000 · 03-17-2026, 09:05 PM

Hey there!

Wondering if anyone has an idea on how to fix this. Kobo support has no solution but have me buying a new device.

I've been using Koreader for a while now and after purchasing a remote and not having it work with koreader, I decided to go back to the original Kobo (keeping koreader on it.) I tried updating and my device went into the three dot screen that doesn't want to budge.

Every time I try to do a manual reset (holding only the power button) or a factory reset, it ends up having the LED flash/screen flash and returning to the three dots. The device does not want to go into the "powered off" screen. My computer does not recognize the device when I plug it in.

Aleron Ives · 03-18-2026, 04:51 PM

You can open the device, carefully remove the waterproofing layer over the SD card slot, and remove the SD card. Request a Libra 2 image in the image thread, write the image to a new SD card, and then insert the new SD card. In theory, this should bring your Libra 2 back to life.

JSWolf · 03-18-2026, 08:28 PM

Quote:

Originally Posted by Aleron Ives

You can open the device, carefully remove the waterproofing layer over the SD card slot, and remove the SD card. Request a Libra 2 image in the image thread, write the image to a new SD card, and then insert the new SD card. In theory, this should bring your Libra 2 back to life.

But you have to be very careful. The SD card has a layer of waterproofing on it that needs to be able to be removed.

DJUNGELSKOG · Yesterday, 08:16 AM

Quote:

Originally Posted by Multivac000

Hey there!

Wondering if anyone has an idea on how to fix this. Kobo support has no solution but have me buying a new device.

I've been using Koreader for a while now and after purchasing a remote and not having it work with koreader, I decided to go back to the original Kobo (keeping koreader on it.) I tried updating and my device went into the three dot screen that doesn't want to budge.

Every time I try to do a manual reset (holding only the power button) or a factory reset, it ends up having the LED flash/screen flash and returning to the three dots. The device does not want to go into the "powered off" screen. My computer does not recognize the device when I plug it in.

This has happened my Libra 2 as well, flashing a new image on a new SD card has brought it back to life.

I've ended up installing an older firmware version on it though because the newest firmware version kept turning wifi and bluetooth on automatically, resulting in a massive battery drain.

These reddit users are experiencing a similar problem:

https://www.reddit.com/r/kobo/commen...turning_on_in/

https://www.reddit.com/r/kobo/commen..._libra_2_help/

Good luck!!

03-17-2026, 09:05 PM	#1
Multivac000 Junior Member Posts: 1 Karma: 10 Join Date: Mar 2026 Device: Kobo Libra 2	Bricked device after update Hey there! Wondering if anyone has an idea on how to fix this. Kobo support has no solution but have me buying a new device. I've been using Koreader for a while now and after purchasing a remote and not having it work with koreader, I decided to go back to the original Kobo (keeping koreader on it.) I tried updating and my device went into the three dot screen that doesn't want to budge. Every time I try to do a manual reset (holding only the power button) or a factory reset, it ends up having the LED flash/screen flash and returning to the three dots. The device does not want to go into the "powered off" screen. My computer does not recognize the device when I plug it in.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tolino Shine 2 HD bricked after failed 12.2.0 update – stuck in update loop, no USB a	Minzmarshmallow	Tolino	4	08-01-2025 05:15 PM
Aura H2O Device bricked?	Apofis	Kobo Developer's Corner	3	06-04-2017 06:13 AM
Bricked Device	winternoise	PocketBook	13	03-01-2013 11:16 AM
PRS-600 Bricked device	superbet	Sony Reader Dev Corner	1	02-09-2012 05:06 PM
Firmware Update Kindle bricked after 2.5 update	MePerson	Amazon Kindle	8	06-30-2010 11:37 AM

03-18-2026, 04:51 PM	#2
Aleron Ives Wizard Posts: 1,860 Karma: 17565272 Join Date: Sep 2022 Device: Kobo Libra 2	You can open the device, carefully remove the waterproofing layer over the SD card slot, and remove the SD card. Request a Libra 2 image in the image thread, write the image to a new SD card, and then insert the new SD card. In theory, this should bring your Libra 2 back to life.

Advert