Libra 2 What Are The Odds That Kobo Can Fix..... - Page 2

fogice · 07-22-2022, 02:03 PM

Quote:

Originally Posted by Deobulakenyo

Sometimes it is a bad book that is the culprit.

True. The book in question was fine after a restart, though. I could go back and forth over that chapter break with no issue.

PetBest · 07-23-2022, 06:16 PM

Quote:

Originally Posted by readologist

Maybe Firmware 4.33.19759 will fix

Unfortenately I still had a freeze the day that I installed this version. Hopefully the frequency of freezes is not increasing as in the previous versions.
Especially if you are doing fast paging or fast switching of functions/actions or searching then after a while it tends to freeze.

I wait a while as sometimes the device starts responding on a new action. When still nothing happens then I close the magnetic cover and reopen it and sometimes that even helps.
As a final resort I switch the device off by keeping the power button for about 15 seconds and then it sometimes restarts automatically. If that is not happening I start it manually and continue reading till a new freeze comes.
I always put the device on sleep when not reading.

I have the feeling that the software has some faults/bugs causing memory leakage and once the last free piece of memory is occupied and or too less memory free for executing the next action Kobo Libra 2 freezes and only a reboot will solve the issue.

RobertJSawyer · 08-19-2022, 03:37 PM

Dang! I've been having a lot of hangs on my Libra 2 with the current firmware (4.33.19759). I use a Sleepcover over, and tend to close the Sleepcover with a book file still open. When I reopen the Sleepcover (revealing the book I was previously reading), I often go to the Home screen to chose a different book ... and the device hangs on the home screen, requiring a reboot. Very frustrating.

Ned · 08-19-2022, 03:43 PM

No hangs on 4.33.19759, but random restarts mid-page.
Just installed 4.32 to see if that cures it.

DNSB · 08-19-2022, 03:45 PM

With 4.33.19759 on my Sage, the only book that I've found consistent hangs with is the calibre user manual. That ePub also made epubcheck very unhappy when I was looking at it. OTOH, it works fine in calibre's ebook-viewer. Oddly, the only ePub I have that makes InDesign looks like a good tool for creating ePubs.

JSWolf · 08-19-2022, 03:48 PM

Quote:

Originally Posted by RobertJSawyer

Dang! I've been having a lot of hangs on my Libra 2 with the current firmware (4.33.19759). I use a Sleepcover over, and tend to close the Sleepcover with a book file still open. When I reopen the Sleepcover (revealing the book I was previously reading), I often go to the Home screen to chose a different book ... and the device hangs on the home screen, requiring a reboot. Very frustrating.

I've been reading an eBook in KePub and I've not had a hang or reboot yet. But I do make sure that before I plug in the Kobo, I have an ePub eBook open. This is with the Libra 2.

JSWolf · 08-19-2022, 03:49 PM

Quote:

Originally Posted by DNSB

With 4.33.19759 on my Sage, the only book that I've found consistent hangs with is the calibre user manual. That ePub also made epubcheck very unhappy when I was looking at it. OTOH, it works fine in calibre's ebook-viewer. Oddly, the only ePub I have that makes InDesign looks like a good tool for creating ePubs.

Does it make Vellum look good?

Sirtel · 08-19-2022, 04:00 PM

No hangs on either my Sage or the Libra 2 with 4.32 firmware. Both epubs and kepubs.

DNSB · 08-19-2022, 04:41 PM

Quote:

Originally Posted by JSWolf

Does it make Vellum look good?

Yes. At least Vellum spits out valid ePub 3 code.

For instance, you will see this multiple times in the body of the XHTML files:

Code:

      <style>
      code {
        font-size: 1em;
        background-color: transparent;
        font-family: sans-serif;
      }
      </style>

Now if this had been added between the <head></head> element tags such as:

Code:

  <style type="text/css" title="override_css">
      code {
        font-size: 1em;
        background-color: transparent;
        font-family: sans-serif;
      }
  </style>

It would have been worked and not triggered errors.

I've also attached the epubcheck output to this message.

JSWolf · 08-20-2022, 04:50 AM

That is a mess. I never thought I'd see something worse then Vellum.

mbrisco · 08-27-2022, 07:21 AM

All the firmware updates in the world won't fix the crappy power efficiency of the components they used and the the resulting substandard battery life on the Libra 2. As for the crashes, devs have said in effect that the kernel of the Libra 2 would required a rewrite from scratch to become stable, and that the current kernel is just bad bad bad. I wouldn't hold my breath for it. It's a nice looking device though

JSWolf · 08-27-2022, 11:32 AM

Quote:

Originally Posted by mbrisco

All the firmware updates in the world won't fix the crappy power efficiency of the components they used and the the resulting substandard battery life on the Libra 2. As for the crashes, devs have said in effect that the kernel of the Libra 2 would required a rewrite from scratch to become stable, and that the current kernel is just bad bad bad. I wouldn't hold my breath for it. It's a nice looking device though

I'm going to have to disagree on the "substandard battery life" of the Libra 2. I'm finding the battery life to be good. What is it you are doing that's causing the battery to be poor?

The worse stability on the Libra 2 is with KePub. I make sure that I'm displaying an ePub before I plug it into the computer.

Quoth · 08-27-2022, 12:35 PM

I go to "My Books" before plugging a Kobo into computer.

JSWolf · 08-27-2022, 01:49 PM

Quote:

Originally Posted by Quoth

I go to "My Books" before plugging a Kobo into computer.

That works too. But given that most of the time I'm reading something in ePub, I don't have to do anything before plugging.

Deobulakenyo · 08-27-2022, 07:49 PM

^are those necessary? The opening ankepub or going to my books before plugging the Libra 2 to a PC? I usually do it while on the homescreen

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aura H2O Can anyone help me fix my kobo h2o?	Roamer	Kobo Reader	0	02-12-2018 02:26 PM
Kobo cannot fix my issue, can you?	misticaleclipse	Kobo Reader	12	10-09-2011 04:45 PM
Help me fix my Kobo	Looler	Kobo Reader	2	07-29-2011 08:48 AM
Help me fix my mom's Kobo please!	ficbot	Kobo Reader	11	06-24-2010 05:02 PM
Fix for kobo not syncing	daveldhu	Kobo Reader	1	06-01-2010 03:29 PM

08-19-2022, 03:37 PM	#18
RobertJSawyer Guru Posts: 737 Karma: 4306712 Join Date: Jun 2006 Location: Toronto Device: Kobo Libra 2, Clara 2E, and Clara HD; Kindle PaperWhite	Dang! I've been having a lot of hangs on my Libra 2 with the current firmware (4.33.19759). I use a Sleepcover over, and tend to close the Sleepcover with a book file still open. When I reopen the Sleepcover (revealing the book I was previously reading), I often go to the Home screen to chose a different book ... and the device hangs on the home screen, requiring a reboot. Very frustrating.

08-19-2022, 03:43 PM	#19
Ned Ebook reader Posts: 389 Karma: 5899335 Join Date: Oct 2008 Location: York, England Device: Kobo Aura H2O (ed 2, v1), Kobo Forma, Kobo Libra 2	No hangs on 4.33.19759, but random restarts mid-page. Just installed 4.32 to see if that cures it.

08-19-2022, 03:45 PM	#20
DNSB Bibliophagist Posts: 46,273 Karma: 169098402 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	With 4.33.19759 on my Sage, the only book that I've found consistent hangs with is the calibre user manual. That ePub also made epubcheck very unhappy when I was looking at it. OTOH, it works fine in calibre's ebook-viewer. Oddly, the only ePub I have that makes InDesign looks like a good tool for creating ePubs.

08-19-2022, 04:00 PM	#23
Sirtel Grand Sorcerer Posts: 13,483 Karma: 239219543 Join Date: Jan 2014 Location: Estonia Device: Kobo Sage & Libra 2	No hangs on either my Sage or the Libra 2 with 4.32 firmware. Both epubs and kepubs.

08-20-2022, 04:50 AM	#25
JSWolf Resident Curmudgeon Posts: 79,763 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	That is a mess. I never thought I'd see something worse then Vellum.

08-27-2022, 07:21 AM	#26
mbrisco (gtfo/freak) Posts: 115 Karma: 2288752 Join Date: Nov 2019 Device: Likebook Alita	All the firmware updates in the world won't fix the crappy power efficiency of the components they used and the the resulting substandard battery life on the Libra 2. As for the crashes, devs have said in effect that the kernel of the Libra 2 would required a rewrite from scratch to become stable, and that the current kernel is just bad bad bad. I wouldn't hold my breath for it. It's a nice looking device though

08-27-2022, 12:35 PM	#28
Quoth Still reading Posts: 14,069 Karma: 105206895 Join Date: Jun 2017 Location: Ireland Device: All 4 Kinds: epub eink, Kindle, android eink, NxtPaper	I go to "My Books" before plugging a Kobo into computer.

08-27-2022, 07:49 PM	#30
Deobulakenyo Guru Posts: 706 Karma: 2153490 Join Date: Aug 2021 Location: Stupid Philippines Device: Kobo Libra 2, Boyue Likebook P78	^are those necessary? The opening ankepub or going to my books before plugging the Libra 2 to a PC? I usually do it while on the homescreen

Advert

Advert