Glo Urgent Request - Page 2

Ken Maltby · 01-28-2014, 12:43 PM

Hmm... I prefer to not register the device with Kobo at all, so I wouldn't have tried it that way. So you are saying that after applying the wanted FW, there is no requirement to setup and register with the Kobo servers, so no automatic updating to the current FW? So after post #7 and the current FW is installed, you can apply the wanted FW and not have to do the registration?

Luck;
Ken

davidfor · 01-28-2014, 10:20 PM

Ken: Unless, I misunderstand what you are asking, once the device is registered, whether with a real account or a fake one by updating the database, any firmware version can be installed. And then you can manually load a newer version if you want. But, the registration will need to be redone after a factory reset or logging out on the device.

OhGodBears: I understand where you are coming from. Christmas with my father-in-law had some interesting moments because of this.

For your Grandmother, apart from the familiarity of the smiley face (which I miss as well), I think the older home screen is probably better. I think either 2.4.0 or 2.5.2 would be the best firmware. 2.6.1 would be better but I think that is the first with the new home screen.

For the database/registration, the best thing to do depends on the source of the books. If you are buying from Kobo and loading them using the Kobo desktop, you need to login with a real Kobo user. Unfortunately, each time you connect, and run the desktop, it will update the firmware. Just remember to remove the firmware files before ejecting.

If you are sideloading manually or via calibre, then using the fake registration that Ken suggests is probably a good idea. I would also suggest taking a copy of the database after doing this in case you have a similar problem later.

01-28-2014, 12:43 PM	#16
Ken Maltby Wizard Posts: 4,466 Karma: 6900052 Join Date: Dec 2009 Location: The Heart of Texas Device: Boox Note2, AuraHD, PDA,	Hmm... I prefer to not register the device with Kobo at all, so I wouldn't have tried it that way. So you are saying that after applying the wanted FW, there is no requirement to setup and register with the Kobo servers, so no automatic updating to the current FW? So after post #7 and the current FW is installed, you can apply the wanted FW and not have to do the registration? Luck; Ken Last edited by Ken Maltby; 01-28-2014 at 12:48 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
urgent help please	kameye	Barnes & Noble NOOK	0	01-29-2013 06:28 AM
URGENT! i formated my kindle URGENT!	kivsha	Kindle Developer's Corner	3	08-14-2011 02:53 AM
PLEASE URGENT HELP !	repods	iRex	9	06-07-2010 04:50 PM

01-28-2014, 10:20 PM	#17
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303824 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	Ken: Unless, I misunderstand what you are asking, once the device is registered, whether with a real account or a fake one by updating the database, any firmware version can be installed. And then you can manually load a newer version if you want. But, the registration will need to be redone after a factory reset or logging out on the device. OhGodBears: I understand where you are coming from. Christmas with my father-in-law had some interesting moments because of this. For your Grandmother, apart from the familiarity of the smiley face (which I miss as well), I think the older home screen is probably better. I think either 2.4.0 or 2.5.2 would be the best firmware. 2.6.1 would be better but I think that is the first with the new home screen. For the database/registration, the best thing to do depends on the source of the books. If you are buying from Kobo and loading them using the Kobo desktop, you need to login with a real Kobo user. Unfortunately, each time you connect, and run the desktop, it will update the firmware. Just remember to remove the firmware files before ejecting. If you are sideloading manually or via calibre, then using the fake registration that Ken suggests is probably a good idea. I would also suggest taking a copy of the database after doing this in case you have a similar problem later.

Advert