Flash the global rom of Boox Page for Boox Leaf3 Chinese version

[Tuankutin]

Originally Posted by Renate

The blank screen is normal. There is no splash.
What you should be looking for is ADB accessibility when you go to recovery.

adb devices
12345678
adb shell
# start autoupdate

starting ttyscreen
waiting for flash drive...

text on screen and i waiting for an hour, not response

[Renate]

Originally Posted by Tuankutin

Waiting for flash drive...

This actually means:

Waiting for you to disconnect the USB cable to the PC and plug in the flash drive that you had previously prepared by writing the decrypted update.zip to it.

[Tuankutin]

Originally Posted by Renate

This actually means:

thankyou for your time, it Page now. Succesfully

[reno549]

@Renate I updated my leaf3 to page successfully. Thank you so much

FYI, Steps I did

1. Install adb (platform-tools) from here
https://developer.android.com/tools/...platform-tools

2. Remove Qualcomm USB driver (uninstall and delete Qualcomm driver)

3. Enable USB debugging in setting.

3. Boot into EDL

adb reboot edl

4. Install WinUSB driver using zadig --> Must restart Windows after install driver otherwise edl.exe can not open the device. Exit EDL by press and hold power button for a while.

5. Boot into EDL again

6. Load Firehose loader. I used poke6.bin from here:
https://www.temblast.com/ref/onyxldr.htm

7. Backup boot and recovery

edl /r /pboot_b boot.img
edl /r /precovery_b recovery.img

8. Flash recovery

edl /w /precovery_b page-rec.img
edl /w /precovery_a page-rec.img

9. Reboot to system

edl /z

10. Reboot to recovery.

adb reboot recovery

11. Log into shell and start autoupdate

adb shell
start autoupdate

12. Unplug USB cable then plugin in a 16gb flash drive with update.zip on it. I don't have a type-c flash drive so I used a type-c to type-a adapter. First time failed because USB formatted in ntfs, second time went ok with fat32 format.

Wait for the update complete. Done. Everything works fine.
Tested factory reset. OK

[Renate]

Thanks, that's a nice write-up.

When you do the install it overwrites recovery with the stock recovery.
That's not a big deal. I just mean the custom recovery is not there.
If you need/want ADB access in recovery you can flash the custom recovery.
If you want to see the stock recovery menu, just type "start recovery".

[ducminh2023]

Originally Posted by Renate

I have had Poke3, Poke5, Go6. Currently I only have access to the Go6.

For the following models I have made some amount of effort, somewhere between a stab at and a finished recovery:

• Go6
• GoColor7
• Leaf
• Leaf2
• MaxLumi2
• Note3
• NoteAir2
• Nova3
• NovaAir
• Page
• Palma2
• Poke3
• Poke5
• TabMiniC

Hi. i know it's kind of off topic to ask here since this is the threads for leaf3/page. Could you send me the recovery for Leaf2. I would like to try it on my leaf2p (64gb)?

[Renate]

Originally Posted by ducminh2023

I would like to try it on my leaf2p (64gb)?

You're saying that the Leaf2_P is the same as the Leaf2?

I think that the Leaf2 recovery that I made was kind of screwed up.
I'd have to go back and look at it.
Please start a Leaf2_P to Leaf2 thread.

[ducminh2023]

Originally Posted by Renate

You're saying that the Leaf2_P is the same as the Leaf2?

I think that the Leaf2 recovery that I made was kind of screwed up.
I'd have to go back and look at it.
Please start a Leaf2_P to Leaf2 thread.

Yeah it's the same specs for screen, ram, soc but different internal storage. I would like to give it a go. I will start a new thread

[jsukwon]

Originally Posted by Renate

I have had Poke3, Poke5, Go6. Currently I only have access to the Go6.

For the following models I have made some amount of effort, somewhere between a stab at and a finished recovery:

• Go6
• GoColor7
• Leaf
• Leaf2
• MaxLumi2
• Note3
• NoteAir2
• Nova3
• NovaAir
• Page
• Palma2
• Poke3
• Poke5
• TabMiniC

Hi. I've been following this topic for a while. Can you make a custom rec for note x3/air3? They are based on qualcomm 680, with 4gb of ram and 64gb storage, same release date. I have a x3 and want to make it to air 3. Thank you alot

[Renate]

Originally Posted by jsukwon

Can you ...

Mmm, ok, in a bit...

Please make a thread that addresses this model.

[jsukwon]

Originally Posted by Renate

Mmm, ok, in a bit...

Please make a thread that addresses this model.

Wow thank you for your reply. I have started a new thread. Hope to hear from you soon. I have been following this thread so I think I know how to do it, just wait for your custom rec

[VANHUY]

Originally Posted by I_Love_Saigon

Hi Renate,

The device has been updated successfully, It was change to Boox Page with the English and Vietnamese library. Thank you very much for your support. I will note your guide as a tutorial.

Thank you.

Hi I_Love_Saigon
I am using boox leaf 3 and am currently in Saigon. Can you give me detailed instructions on how to install leaf 3 into a boox page?
Thank you

[longbinh]

Originally Posted by Renate

Ok, I've sent you a link for a recovery image.

First, you determine which slot you are on using ADB in the normal system. Follow these instructions, but stop if doesn't look like this. The ... is where it reboots.

C:\>adb shell
$ getprop | grep suffix
[ro.boot.slot_suffix]: [_a] -- or it might say _b
$ adb reboot edl
...
C:\>edl /lwhatever
C:\>edl /w /precovery_a rec.img -- or you might need to say _b
C:\>edl /z
...
C:\>adb shell
$ reboot recovery
...
-- You should see it boot to a white screen --
C:\>adb shell
# start ttyscreen
-- Do you see text on the screen or at least wiggly lines? --
# reboot
...

Good luck.

Hello Renate
Can you send recovery image?
I need convert my leaf3, thank you