Firmware 4.38.21908 - Page 11

John F · 09-24-2023, 11:34 AM

Quote:

Originally Posted by Sirtel

I was under the impression that going to My Books is no longer enough with recent firmware versions.

Could be. I like to live dangerously.

I'm using a Kobo Clara 2E and 4.37.21586 and the only problem I've seen is that it spontaneously rebooted after one disconnect. I have forgotten to go to My Books a couple of times and didn't have any problems.

compurandom · 09-24-2023, 01:31 PM

Quote:

Originally Posted by Vladi69

I was doing it in the wrong way. After pushing books it is necessary to immediately disconnect USB cable from PC in order to launch import activity, and not power off the device

I've managed to reboot a few times before it imported books, and also had cases where calibre copied the books but didn't update the database due to some problem.

If the database is corrupted beyond use, the books won't import.
But if the database isn't completely corrupted, the should get imported after reboot just like they would after a proper disconnect. Of course, if you were expecting calibre to put those books into shelves, that won't happen until next time calibre syncs metadata, so it might *look* like they didn't import.

And if you really did reboot without ejecting, there might be both database and filesystem corruption that may or may not get fixed at reboot, and even if it is fixed, the (partially) copied books might be lost by the filesystem repair.

JSWolf · 09-24-2023, 02:16 PM

Quote:

Originally Posted by Sirtel

I'll stick to 4.34 until this bug is fixed. No way do I want to reboot my Kobos every time I connect them.

I just go to the home screen before connecting to the computer as I've done since at least 4.34.

ownedbycats · 09-24-2023, 06:52 PM

Quote:

Originally Posted by John F

Do you connect for other reasons?

Yes. To update my Calibre library when I finish a book, and send fanfic updates to device (which does not require import - see this page).

Quote:

Originally Posted by Sirtel

I was under the impression that going to My Books is no longer enough with recent firmware versions.

I've gotten the bug when connecting from home screen, but only after importing a bunch of books. I suspect that the import process (or possibly sync) had left a file open.

icallaci · 09-24-2023, 07:26 PM

Quote:

Originally Posted by ownedbycats

I've gotten the bug when connecting from home screen, but only after importing a bunch of books. I suspect that the import process (or possibly sync) had left a file open.

I get this bug too, even though I always return to the home screen before connecting. I never sync, so I don't think that's it. I've stopped trying to track it down and just reboot the reader before I connect. No problems since I started doing that.

Tawn · 09-24-2023, 09:14 PM

Quote:

Originally Posted by Aleron Ives

At least for me, ejecting from Windows is never detected by my Libra. I have to eject and then unplug the USB cable to get the device to start processing new books. Perhaps ejecting from Calibre behaves differently.

I don't use Calibre so I always eject from Win10 (right-click KOBOeReader and click Eject). It takes awhile but eventually the book(s) appear on my Libra 2 and then I unplug. Originally the delay made me think I needed to unplug first, but then I realized it was just slow.

Aleron Ives · 09-24-2023, 11:48 PM

How long did you have to wait? I tried waiting a minute (maybe even a few minutes), but the connected and charging screen didn't go away until I unplugged the USB cable. Perhaps it depends upon your version of Windows.

Phil_C · 09-25-2023, 12:59 AM

I've left the Kobo plugged in to USB for an hour after ejecting from Win 11. The "connected and charging" screen remains until it is physically disconnected. Only then will it return to the home screen. Same in Win 10.

JSWolf · 09-25-2023, 06:55 AM

Quote:

Originally Posted by Phil_C

I've left the Kobo plugged in to USB for an hour after ejecting from Win 11. The "connected and charging" screen remains until it is physically disconnected. Only then will it return to the home screen. Same in Win 10.

Try connecting to calibre and ejecting from there.

Phil_C · 09-25-2023, 11:15 AM

Quote:

Originally Posted by JSWolf

Try connecting to calibre and ejecting from there.

You should read these posts in context.

JSWolf · 09-25-2023, 12:32 PM

Quote:

Originally Posted by Phil_C

You should read these posts in context.

You said disconnecting from Win 11. That means used the eject in Windows. I'm saying to try ejecting using calibre's eject.

Phil_C · 09-25-2023, 12:52 PM

Quote:

Originally Posted by JSWolf

You said disconnecting from Win 11. That means used the eject in Windows. I'm saying to try ejecting using calibre's eject.

I always use calibre. People here were asking what happens if you eject from Windows. And to compare our observations.

Context.

DNSB · 09-25-2023, 05:30 PM

I've tried using the SmartEject plugin in calibre, calibre's built in eject, Windows eject from File Explorer and using the USB widget in the systray. The only one I've had issues with is the USB widget.

ownedbycats · 09-25-2023, 06:00 PM

Quote:

Originally Posted by DNSB

I've tried using the SmartEject plugin in calibre, calibre's built in eject,

fwiw, they both do the same thing - SmartEject uses the Calibre standard eject, it just runs some checks for duplicates and the like first.

DNSB · 09-25-2023, 06:02 PM

I remember some complaints a while back about the two not working the same though I have never seen any difference so I tested with both.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firmware Update Instructions and the latest Firmware Versions	mitchwah	Ectaco jetBook	113	10-24-2023 10:02 PM
Nouveau firmware firmware 6.5.765 pour la Inkpad 3/PB740	mooms	PocketBook	0	11-08-2021 09:23 AM
Firmware Update Kindle firmware 5.12.1	eilon	Amazon Kindle	102	09-26-2019 09:38 PM
Firmware glitch - typing text slow on some firmware+device combinations	mdp	Onyx Boox	11	11-11-2017 01:48 AM
Firmware 2.0.3 Pocketbook IQ - another firmware is release for IQ	tvpupsik	PocketBook	26	12-13-2010 04:03 PM

09-24-2023, 11:48 PM	#157
Aleron Ives Wizard Posts: 1,777 Karma: 16319690 Join Date: Sep 2022 Device: Kobo Libra 2	How long did you have to wait? I tried waiting a minute (maybe even a few minutes), but the connected and charging screen didn't go away until I unplugged the USB cable. Perhaps it depends upon your version of Windows.

09-25-2023, 12:59 AM	#158
Phil_C Addict Posts: 277 Karma: 391602 Join Date: Oct 2009 Location: Chicago, IL USA Device: Sony PRS-350; Kobo Clara HD; Kobo Clara 2E; Kobo Clara BW	I've left the Kobo plugged in to USB for an hour after ejecting from Win 11. The "connected and charging" screen remains until it is physically disconnected. Only then will it return to the home screen. Same in Win 10.

09-25-2023, 05:30 PM	#163
DNSB Bibliophagist Posts: 48,175 Karma: 174315444 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	I've tried using the SmartEject plugin in calibre, calibre's built in eject, Windows eject from File Explorer and using the USB widget in the systray. The only one I've had issues with is the USB widget.

09-25-2023, 06:02 PM	#165
DNSB Bibliophagist Posts: 48,175 Karma: 174315444 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	I remember some complaints a while back about the two not working the same though I have never seen any difference so I tested with both.