PRSCustomizer: Customize and personalize your PRS505 Reader - Page 49

JeffElkins · 08-19-2009, 10:00 AM

Quote:

Originally Posted by miha

I am the new and not so proud owner of PRS-505. I successfully followed all the steps for customizing my device for cyrillic fonts - book title and author are readable. The LITTLE problem is book itself is still NOT readable. Am I doing something wrong. Book is on the SD card in the RTF format. Need help!
Thank you.

How many books have you tried?

JeffElkins · 08-19-2009, 11:34 AM

Quote:

Originally Posted by trapm

I can also help with the programming.
I have had experience with RB (one version lower than the version you use but I could upgrade) in the past and I currently work with Cocoa.

Development is frozen until Sony releases new 505 firmware (hopefully later this month). Perhaps they'll include a locale-based updater to replace the US-centric one available now.

igorsk · 08-19-2009, 12:30 PM

Quote:

Originally Posted by miha

I am the new and not so proud owner of PRS-505. I successfully followed all the steps for customizing my device for cyrillic fonts - book title and author are readable. The LITTLE problem is book itself is still NOT readable. Am I doing something wrong. Book is on the SD card in the RTF format. Need help!

Best is to avoid RTF. Save it as HTML and convert to EPUB or LRF with calibre.
Otherwise, you need to "unicodify" the RTF file. It can be done by this utility, or the following magic sequence:
1) Open file in WordPad
2) Select All (Ctrl-A)
3) Change font encoding to Western
4) Save

miha · 08-19-2009, 01:36 PM

Thank you. "western" works (unfortunately it's reversed inconviniences - now I can read the book, but tags - title,author - are not in the cyrillic).
I will try CALIBRE(I guess utility) as well.

Ronzzz · 08-20-2009, 04:46 AM

Caution: the prs505 battery is not user replaceable. Sony's cost for this maintenance?
$280.00. It is designed obselesence!!! (sp)

alexreader · 08-22-2009, 06:30 PM

Hi, I just got a PRS505 in France, and like many others here would like to change the language to English... it's now in version 1.3

I tried using PRScustomizer (designed my own logo too, was very excited!) but after flashing nothing has changed and it's still in French, and no logo. After searching the forums I saw that I should downgrade the version using the updater from sony and only then customise - however the updater from Sony checks the version number on my reader and says it's up to date and does nothing

An earlier comment on this thread says to unzip the updater and change the version number in some file, but i only got the option to download an exe file from the sony website so I don't know if I can change anything there?

Is there any way out of this, or am I destined to learn French? And if so, does anyone know a good ebook for learning French? ;o)

JeffElkins · 08-22-2009, 06:42 PM

The exe file is actually an archive. Unzip it and follow the directions you read.

alexreader · 08-22-2009, 08:17 PM

Thanks Jeff, that worked

great stuff!

Is it possible now to change firmware from 1.1 to 1.2?

Valwit · 08-26-2009, 11:52 AM

Quote:

Originally Posted by Ronzzz

Caution: the prs505 battery is not user replaceable. Sony's cost for this maintenance?
$280.00. It is designed obselesence!!! (sp)

that really depends on the user. 2 screws are not really a big issue, the rest is straight forward. feel free to get it done by someone in a mobile phone shop for 20 euro

JeffElkins · 08-26-2009, 01:56 PM

Quote:

Originally Posted by alexreader

Thanks Jeff, that worked

great stuff!

Is it possible now to change firmware from 1.1 to 1.2?

Yep. Just flash the image using Igorsk's universal flasher.

Taxidermista · 09-15-2009, 07:49 PM

Quote:

Originally Posted by JeffElkins

That error's being thrown by Igorsk's Universal Flasher which my program depends on. Unless he has a workaround, you'll need to wait for the UF to be updated.

I also have a PRS-505 from UK with fw 1.2.00.18050. I've tried your software, (option 5 and then 6) to flash US version 1.1 with spanish language and everything goes fine but the fw remains unchanged. What am I doing wrong?

EDIT: Ok, I've figured out what I'm doing wrong, in order to change firmware you need an original image to flash. The Sony updater does not allow to downgrade from 1.2.00.18050 to 1.1.00.18040, you have to search inside the updater (Winrar/Winzip) and edit this file with Notepad:

eBookUpdater\assets\updaterAssets\PRSversion.dat

If you change the number from 110018040 to 120018051 then you can downgrade the UK firmware.

RazorICE · 09-16-2009, 04:38 PM

Quote:

Originally Posted by Taxidermista

I also have a PRS-505 from UK with fw 1.2.00.18050. I've tried your software, (option 5 and then 6) to flash US version 1.1 with spanish language and everything goes fine but the fw remains unchanged. What am I doing wrong?

EDIT: Ok, I've figured out what I'm doing wrong, in order to change firmware you need an original image to flash. The Sony updater does not allow to downgrade from 1.2.00.18050 to 1.1.00.18040, you have to search inside the updater (Winrar/Winzip) and edit this file with Notepad:

eBookUpdater\assets\updaterAssets\PRSversion.dat

If you change the number from 110018040 to 120018051 then you can downgrade the UK firmware.

Oh my god. Thank you so very, very much! You saved me from an unrecoverable bricked 505!

I have a UK 505, and after playing around with the PRS customizer to see if I could implement anything else fun, I bricked it. Soft reset would let me access the device as a drive on my computer, and the books showed up fine on the library, but it would do nothing other than that. Hard reset didn't do anything, maybe I was doing it wrong. Anyway, I found a link to a 1.1 US firmware update, but... my 505 is from the UK, so 1.2 is "already updated". There is no 1.2 firmware update on the UK support site, that I could find. So just as I was beginning to lose hope, I opened up the 1.1 firmware update in winrar, extracted it all, did what you said, and voila, my 505 updated to 1.1, then to 1.2, and now it's back to normal!

Anyway, I registered just to say thank you, so THANK YOU!

Bilbo1967 · 09-17-2009, 04:07 PM

Having used PRS Customizer once, is it possible to use it again on the same Sony 505 (I want to turn the number buttons back on again)?

JeffElkins · 09-18-2009, 12:23 AM

Quote:

Originally Posted by Bilbo1967

Having used PRS Customizer once, is it possible to use it again on the same Sony 505 (I want to turn the number buttons back on again)?

Yes. I do it frequently.

Bilbo1967 · 09-18-2009, 12:02 PM

Quote:

Originally Posted by JeffElkins

Yes. I do it frequently.

Thanks Jeff, done it successfully now.

Just found that I couldn't live without the number buttons whilst reading.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS500 - Will we be able to use PRSCustomizer after upgrading firmware?	jimmyzou	Sony Reader	0	11-30-2009 10:10 AM
Prscustomizer not working and info on unicode	shilpa	Sony Reader	1	08-14-2009 01:35 AM
beginner to prs505 reader	adixon	Sony Reader	30	12-08-2008 01:00 PM
Help with PRSCustomizer!! Please	rlanger	Sony Reader	11	11-28-2008 05:47 AM
How-To Customize the Reader Name and Theme	Frog29	Sony Reader Dev Corner	1	08-08-2008 07:49 PM

08-19-2009, 01:36 PM	#724
miha Junior Member Posts: 3 Karma: 10 Join Date: Aug 2009 Device: prs-505	Thank you. "western" works (unfortunately it's reversed inconviniences - now I can read the book, but tags - title,author - are not in the cyrillic). I will try CALIBRE(I guess utility) as well.

08-20-2009, 04:46 AM	#725
Ronzzz Member Posts: 16 Karma: 10 Join Date: Aug 2009 Device: PRS505	Caution: the prs505 battery is not user replaceable. Sony's cost for this maintenance? $280.00. It is designed obselesence!!! (sp)

08-22-2009, 06:30 PM	#726
alexreader Junior Member Posts: 2 Karma: 10 Join Date: Aug 2009 Device: PRS505	Hi, I just got a PRS505 in France, and like many others here would like to change the language to English... it's now in version 1.3 I tried using PRScustomizer (designed my own logo too, was very excited!) but after flashing nothing has changed and it's still in French, and no logo. After searching the forums I saw that I should downgrade the version using the updater from sony and only then customise - however the updater from Sony checks the version number on my reader and says it's up to date and does nothing An earlier comment on this thread says to unzip the updater and change the version number in some file, but i only got the option to download an exe file from the sony website so I don't know if I can change anything there? Is there any way out of this, or am I destined to learn French? And if so, does anyone know a good ebook for learning French? ;o)

08-22-2009, 06:42 PM	#727
JeffElkins Guru Posts: 780 Karma: 1416 Join Date: Jan 2008 Device: Kobo Clara 2E/HD, Kindle PW	The exe file is actually an archive. Unzip it and follow the directions you read.

08-22-2009, 08:17 PM	#728
alexreader Junior Member Posts: 2 Karma: 10 Join Date: Aug 2009 Device: PRS505	Thanks Jeff, that worked great stuff! Is it possible now to change firmware from 1.1 to 1.2?

09-17-2009, 04:07 PM	#733
Bilbo1967 Not scared! Posts: 13,424 Karma: 81011643 Join Date: Mar 2009 Location: Midlands, UK Device: Kindle Paperwhite 10, Huawei M5 10	Having used PRS Customizer once, is it possible to use it again on the same Sony 505 (I want to turn the number buttons back on again)?

Advert

Advert