Calibre - Open Inktpot

hannah · 06-12-2009, 06:39 AM

Hello,

I asked Kovid Goyal if there is a chance the bebook with open inktpot firmware will also be recognized in the future (send to device function)? He answered me :

Quote:

Originally Posted by kovidgoyal

It's not in my plans, but it should be relatively easy for one of the openinkpot guys to write a calibre driver for it.

https://www.mobileread.com/forums/showthread.php?t=48683

Is it possible that one off you write a calibre driver for OI ? Please ?

I want to help with it, but am a complete programming ignorant...

Dave_S · 06-12-2009, 11:29 AM

Quote:

Originally Posted by hannah

Hello,

I asked Kovid Goyal if there is a chance the bebook with open inktpot firmware will also be recognized in the future (send to device function)? He answered me :

https://www.mobileread.com/forums/showthread.php?t=48683

Is it possible that one off you write a calibre driver for OI ? Please ?

I want to help with it, but am a complete programming ignorant...

I think that you might be getting the cart ahead of the horse.

At this stage of OI development it would also take some ( considerable? )work on the OI side as well, since OI does not yet expose the file system via USB, other than with SSH. I think that I recall reading in the roadmap that there may be something like the Hanlin firmware's USB to PC connection eventually, but the current snapshot is not ready for that yet????????

lunohod · 06-12-2009, 11:40 AM

Quote:

Originally Posted by Dave_S

I think that you might be getting the cart ahead of the horse.

At this stage of OI development it would also take some ( considerable? )work on the OI side as well, since OI does not yet expose the file system via USB, other than with SSH. I think that I recall reading in the roadmap that there may be something like the Hanlin firmware's USB to PC connection eventually, but the current snapshot is not ready for that yet????????

Well, you can just use scp or rsync in that calibre driver

This will certainly work on linux machines.

Dave_S · 06-12-2009, 12:34 PM

Quote:

Originally Posted by lunohod

Well, you can just use scp or rsync in that calibre driver

This will certainly work on linux machines.

Hmmmmm, I did not realize that those were available in the OS on the current OI snapshot

I am learning something new everyday!

Reader2 · 06-16-2009, 04:13 PM

This is supposed to be grow great - just a open (standard) connection, rsync on my BeBook - whow.

dottedmag · 06-17-2009, 06:13 AM

I've recently added installing rsync by default to the firmware building script.

It was avaliable for a while from APT repo, but required manual installation using the apt-get.

Hellmark · 07-10-2009, 01:37 AM

Rsync is only needed on one end. I use Rsync all the time to backup data onto a server that does not have Rsync, just SSH. Most people don't realize that SSH can do file transfers.

dottedmag · 07-10-2009, 02:26 AM

Quote:

Originally Posted by Hellmark

Rsync is only needed on one end. I use Rsync all the time to backup data onto a server that does not have Rsync, just SSH. Most people don't realize that SSH can do file transfers.

Uhmm. How would you do a delta-transfers without rsync on the device?

Hellmark · 07-10-2009, 02:56 AM

In cases like that, it merely copies the entire file back over. Your efficiency goes out the window, but, still gets done.

dottedmag · 07-10-2009, 02:58 AM

Well, it sucks. You can

Quote:

tar cf - <files> | ssh device tar xf -

as well then

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open with Calibre...	mfaine	Calibre	0	06-19-2010 11:42 AM
Can't open Calibre	yankgirl	Calibre	1	11-22-2009 11:45 PM
Calibre won't open since updating	bobsi18	Calibre	14	11-14-2009 05:03 PM
Calibre for OS X doesn't want to open	thibaulthalpern	Calibre	2	03-14-2009 06:08 PM
Can not open Calibre (Version: 0.4.86)	sergiodongala	Calibre	29	09-28-2008 02:23 AM

06-16-2009, 04:13 PM	#5
Reader2 intentionally left blank Posts: 28 Karma: 12 Join Date: Jun 2009 Location: Netherlands Device: BeBook (display damage) so 2nd: Nook still working; Sony hardly used;	This is supposed to be grow great - just a open (standard) connection, rsync on my BeBook - whow.

06-17-2009, 06:13 AM	#6
dottedmag OpenInkpot co-founder Posts: 410 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	I've recently added installing rsync by default to the firmware building script. It was avaliable for a while from APT repo, but required manual installation using the apt-get.

07-10-2009, 01:37 AM	#7
Hellmark Wizard Posts: 2,592 Karma: 4290425 Join Date: Jun 2009 Location: Foristell, Missouri, USA Device: Nokia N800, PRS-505, Nook STR Glowlight, Kindle 3, Kobo Libra 2	Rsync is only needed on one end. I use Rsync all the time to backup data onto a server that does not have Rsync, just SSH. Most people don't realize that SSH can do file transfers.

07-10-2009, 02:56 AM	#9
Hellmark Wizard Posts: 2,592 Karma: 4290425 Join Date: Jun 2009 Location: Foristell, Missouri, USA Device: Nokia N800, PRS-505, Nook STR Glowlight, Kindle 3, Kobo Libra 2	In cases like that, it merely copies the entire file back over. Your efficiency goes out the window, but, still gets done.

Advert

Advert