Plato or Koreader by default

stiivo · 07-28-2020, 07:16 AM

Hi, is it possible to have plato or Koreader launch by default when turning on the device please? i had installed both using the following https://www.mobileread.com/forums/sh...hlight=default

Could some one help me out on how this can be done if its possible. Thanks

NiLuJe · 07-28-2020, 12:42 PM

Not without doing it by hand, which I do NOT recommend, for various reasons, even for people who actually know what they're doing

.

I also don't recommend skipping booting Nickel once each power cycle, period, for other various reasons

.

That said, Plato *has* proper support for this, as this is how the author uses it. It might even be documented properly by now, check Plato's code repository on github.

baskerville · 07-28-2020, 02:27 PM

Quote:

Originally Posted by NiLuJe

I also don't recommend skipping booting Nickel once each power cycle, period, for other various reasons

.

Could you elaborate?

Quote:

Originally Posted by NiLuJe

That said, Plato *has* proper support for this, as this is how the author uses it. It might even be documented properly by now, check Plato's code repository on github.

It isn't documented yet, but I've wrote a script, standalone.sh, to automate the process:

Code:

./build.sh && ./dist.sh && ./standalone.sh FIRMWARE_ARCHIVE NICKEL_MENU_ARCHIVE

Where NICKEL_MENU_ARCHIVE is a NickelMenu build artifact.

It generates a standalone package in the standalone directory.

NiLuJe · 07-28-2020, 02:39 PM

@baskerville: There are various low-level thingies initialized by Nickel's bringup process (the most obvious one being the gyro, IIRC).

But I'd bet there's probably a few other subtle power management thingies involved, too.

07-28-2020, 07:16 AM	#1
stiivo Enthusiast Posts: 44 Karma: 19020 Join Date: Sep 2018 Device: Kobo Clara HD	Plato or Koreader by default Hi, is it possible to have plato or Koreader launch by default when turning on the device please? i had installed both using the following https://www.mobileread.com/forums/sh...hlight=default Could some one help me out on how this can be done if its possible. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
One-Click Install Packages for KOReader & Plato	NiLuJe	Kobo Developer's Corner	1305	06-29-2025 03:42 AM
[Suggestion] KOReader/Plato launchers in nickel	Elektron	KOReader	1	07-09-2020 01:03 PM
Please help me figure out one-click install of koreader and plato	koboquestion	Kobo Developer's Corner	3	08-31-2019 10:52 PM
Forma Unable to connect to Wi-Fi after installing KOReader and Plato	JawadLeLogeur	Kobo Reader	13	06-26-2019 05:05 PM
Possible to have Koreader as default for all but Adobe Digital Editions?	Sakke	KOReader	1	05-06-2019 09:02 AM

07-28-2020, 12:42 PM	#2
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Not without doing it by hand, which I do NOT recommend, for various reasons, even for people who actually know what they're doing . I also don't recommend skipping booting Nickel once each power cycle, period, for other various reasons . That said, Plato has proper support for this, as this is how the author uses it. It might even be documented properly by now, check Plato's code repository on github.

07-28-2020, 02:39 PM	#4
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@baskerville: There are various low-level thingies initialized by Nickel's bringup process (the most obvious one being the gyro, IIRC). But I'd bet there's probably a few other subtle power management thingies involved, too.

Advert