|
|
#1 |
|
Developer's Corner Mascot
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 486
Karma: 1277790
Join Date: Sep 2013
Device: Kindle Paperwhite 5.3.4, Kindle Keyboard 3.4
|
[Dev] Comprehensive list of system events
I'm trying to make a comprehensive list of all the system events that can be listened from lipc-wait-event. If anybody wants to help... this is what I've found so far:
Code:
EVENT PUBLISHER EVENT NAMES
com.lab126.powerd battLevelChanged,charging,notCharging,outOfScreenSaver,t1TimerReset
com.lab126.cmd interfaceChange,wirelessEnableChanged,triggerTimeChange,connectionAvailable,connectionNotAvailable
com.lab126.wan serviceStateChanged
com.lab126.wifid signalStrength,profileUpdateFailed,profileUpdateOk,scanning,scanComplete,captivePortalDetected
com.lab126.dpmManager parentalControlsStateChange,devicePolicyValueChanged
com.lab126.kaf tzRequested
com.lab126.appmgrd appStateChange,appFailedInGo,appActivating,appPaused,processExited
com.lab126.foobar appStateChange,appFailedInGo
com.lab126.framework tzRequested,settz (tz=time zone),FrameworkStarted
com.lab126.hal usbConfigured, usbUnconfigured
com.lab126.winmgr orientationChange
com.lab126.dynconfig devicePolicyValueChanged
Last edited by Aeris; 11-25-2013 at 05:49 PM. |
|
|
|
|
|
#2 |
|
Evangelist
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 457
Karma: 1287375
Join Date: Jan 2013
Location: West Gardiner, Maine
Device: Touch (5.3.7)
|
"lipc-probe -a -v" works on a touch?
|
|
|
|
| Advert | |
|
|
|
|
#3 |
|
Developer's Corner Mascot
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 486
Karma: 1277790
Join Date: Sep 2013
Device: Kindle Paperwhite 5.3.4, Kindle Keyboard 3.4
|
That command gave me only few events... In fact, if you search in that list the ones I've posted above, most of them aren't there!
|
|
|
|
|
|
#4 |
|
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,506
Karma: 26047202
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
Yeah, prop(ertie)s != events
.That said, there *might* be an equivalent listing the events somewhere... |
|
|
|
|
|
#5 | |
|
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 21
Karma: 141126
Join Date: Dec 2013
Device: touch
|
Quote:
Code:
find / -name "*" -type f ! -path "/mnt/*" -exec grep -H "lipc-send-event" {} \;
Code:
/usr/sbin/otaup: lipc-send-event $OTAMODULE otaSplashInit
/usr/sbin/otaup: lipc-send-event $OTAMODULE otaSplashProgress -i ${3}
/usr/sbin/otaup: lipc-send-event $OTAMODULE otaSplashSuccess
/usr/sbin/otaup: lipc-send-event $OTAMODULE otaSplashError -s "${3}"
/usr/sbin/otaup: lipc-send-event $OTAMODULE otaSplashCleanup
/usr/sbin/updatetime:NTP_TIME_SET_NOTIFICATION="lipc-send-event -r 30 com.lab126.time timeChanged"
/usr/sbin/loginfo: lipc-send-event com.lab126.hal processTooLarge -s $1
/usr/sbin/setdate: lipc-send-event -r 30 com.lab126.time timeChanged -i $delta
/usr/sbin/screenshot:lipc-send-event com.lab126.hal screenShotTaken -s "/mnt/us/${_filename}\.gif"
/usr/lib/liblab126utils.so:if (passwdlg --display=:0.0 %d); then lipc-send-event -r 3 com.lab126.hal passwordIsValid;else lipc-send-event -r 3 com.lab126.hal passwordIsInvalid;fi&
/usr/bin/lipc-send-event:lipc-send-event [-r <retry_count> -d <retry_delay>] <source> <event-name> [-is <value> ...]
/usr/bin/lipc-send-event:lipc-send-event
/usr/bin/notifytph:/usr/bin/lipc-send-event -r 3 com.lab126.hal wanRing -i $1
/usr/bin/powerd_test:lipc-send-event com.lab126.powerd.debug dbg_input_event
/usr/bin/powerd_test:lipc-send-event com.lab126.powerd.debug dbg_power_button_pressed
/usr/bin/powerd_test:lipc-send-event com.lab126.powerd.debug dbg_low_batt_low
/usr/bin/powerd_test:lipc-send-event com.lab126.powerd.debug dbg_power_button_held
/etc/lipc-daemon-props.conf:sendEvent w lipc-send-event com.lab126.system.event
/etc/upstart/langpicker.conf: lipc-send-event com.lab126.blanket.langpicker pickLocale
/etc/upstart/userstore: lipc-send-event -r 3 com.lab126.hal usbUnconfigured
/etc/upstart/framework_setup.conf: lipc-send-event -r 5 $SCREENSAVER_SOURCE $SCREENSAVER_EVENT -i $SCREENSAVER_EVENT_VAL
/etc/upstart/framework_setup.conf: lipc-send-event -r 5 $SCREENSAVER_SOURCE $SCREENSAVER_EVENT -i $SCREENSAVER_EVENT_VAL
/etc/upstart/framework_setup.conf: lipc-send-event -r 5 com.lab126.hal bootSplashCleanup
/etc/upstart/splash: lipc-send-event -r $SPLASH_EVENT_RETRY_COUNT $SPLASH_SOURCE $SPLASH_EVENT_INIT
/etc/upstart/splash: lipc-send-event -r $SPLASH_EVENT_RETRY_COUNT $SPLASH_SOURCE $SPLASH_EVENT_PROG -i $1
/etc/upstart/splash: lipc-send-event -r $SPLASH_EVENT_RETRY_COUNT $SPLASH_SOURCE $SPLASH_EVENT_CLEAN
/etc/upstart/shutdown_showimage:# for lipc-send-event
/etc/upstart/shutdown_showimage:lipc-send-event com.lab126.hal.shutdown showScreen -s "$BLANKET_SHUTDOWN_PARAM"
/etc/upstart/ttsd.conf: lipc-send-event -r 3 com.lab126.tts upstartTtsdExit
/etc/ppp/ip-down:/usr/bin/lipc-send-event com.lab126.hal wanPPPDown
/etc/ppp/ip-up:# /usr/bin/lipc-send-event com.lab126.hal wanPPPUp
/etc/kdb.src/yoshi/system/daemon/usbnetd/usbPlugout:lipc-send-event -r 3 -d 2 com.lab126.hal usbPlugOut
/etc/kdb.src/yoshi/system/daemon/usbnetd/usbUnconfigured:lipc-send-event -r 3 -d 2 com.lab126.hal usbUnconfigured
/lib/udev/bin/mountmmc: /usr/bin/lipc-send-event -r 3 com.lab126.hal mmcIn
/lib/udev/bin/mountmmc: /usr/bin/lipc-send-event -r 3 com.lab126.hal mmcOut
/lib/udev/bin/notifyusb: /usr/bin/lipc-send-event -r 3 com.lab126.hal usbPlugIn
/lib/udev/bin/notifyusb: /usr/bin/lipc-send-event -r 3 com.lab126.hal usbPlugOut
/lib/udev/bin/notifyusb: /usr/bin/lipc-send-event -r 3 com.lab126.hal usbConfigured
/lib/udev/bin/notifyusb: /usr/bin/lipc-send-event -r 3 com.lab126.hal usbUnconfigured
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationUp
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationDown
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationLeft
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationRight
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationFaceDown
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationFaceUp
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationFreeFall
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationTap
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationShake
/lib/udev/bin/notifyorientation: /usr/bin/lipc-send-event -r 3 com.lab126.hal orientationDoubleWave
/lib/udev/bin/notifyheadset: /usr/bin/lipc-send-event -r 3 com.lab126.hal audioHS -i 1
/lib/udev/bin/notifyheadset: /usr/bin/lipc-send-event -r 3 com.lab126.hal audioHS -i 0
Last edited by peterhey; 01-17-2014 at 07:40 AM. |
|
|
|
|
| Advert | |
|
|
![]() |
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Catching system events from mesqute | PaulFreund | Kindle Developer's Corner | 7 | 04-09-2013 06:42 PM |
| Comprehensive List of Kindle Hacks/Modifications | Mario1up | Kindle Developer's Corner | 38 | 07-27-2012 03:41 AM |
| Einfacher Feature-Request: /dev/ptmx und /dev/ttyUSB2 modes | Seneca | PocketBook | 2 | 12-05-2011 05:41 PM |
| how to clean more disk space in root file system to upgrade system | chinaet | iRex | 1 | 12-18-2006 04:54 PM |