Problem sending book to Sony PRS-T1

Loonybin65 · 12-31-2012, 12:05 PM

I have the latest update of Calibre, and today I added two books to my Calibre library. The first one showed a size of 0.3 MB. When I sent it to my ereader, it worked fine, but when you click on the Device icon, it shows the book having a size of 0.0 MB on the Sony reader. The full book is on the device though. Can anyone tell me why this is happening because I'm afraid that it won't show the accurate free space on my ereader in Calibre.

kovidgoyal · 12-31-2012, 01:45 PM

Probably because your reader cannot handle the book. Do an epub to epub conversion in calibre and then send the file to your reader.

AlexBell · 01-01-2013, 12:59 AM

If it's any help I have successfully transferred 300 or so ebooks to my T1 with calibre. I think the problem is more likely with the ebook than with calibre - as I think Kovid is suggesting.

Loonybin65 · 01-01-2013, 11:35 AM

Thank you so much for the suggestion, but unfortunately it didn't work

. I have put hundreds of ebooks on my reader using Calibre but have never had this problem before. Like I said, the full book ends up on my reader - it just doesn't show the correct size. Any other suggestions would be greatly appreciated

.

speakingtohe · 01-01-2013, 02:36 PM

I doubt that calibre uses the reported size of the books to determine how much data to write, although I could be wrong. Chances are it uses a call to the operating system to see how much free space there is.

It is possible to overfill your ereader using calibre, as I did it once by putting on an audio book when I was very low on space (PRS-T1)

IIRC the next time I connected the ereader calibre could not write the database, so I had to delete something(probably the audiobook) and all was well again.

I would not worry too much about it, but you could check the file itself on the ereader and see what size the operating system reports.

Helen

robynmau · 01-07-2013, 03:08 PM

Morning all

Searched for assistance with sending books to my grand sons Sony PRS-T1.

I am getting a strange symbol where the usual epub symbol is [it looks like a V inside a box] . I am using an external hard drive rather than the computer's disk.

Found your thread,

for the help, I will now check the device to see if the books are there or not. If they are on the device, I won't worry too much

but like 'speakingtohe' I've added a lot of books and never had this problem before.

Cheers

Robyn

PS: I've got Calibre 0.9.11 running and think this program is

JSWolf · 01-07-2013, 03:17 PM

Can this eBook that does not work on the T1 be viewed with ADE on your computer?

robynmau · 01-07-2013, 03:34 PM

Thank you for getting back to me so quickly

Unfortunately the book does not view on the computer. When I look to view I got an error message.

JSWolf · 01-07-2013, 03:42 PM

Quote:

Originally Posted by robynmau

Thank you for getting back to me so quickly

Unfortunately the book does not view on the computer. When I look to view I got an error message.

That means it is not a problem with your T1, but is a problem with that eBook.

robynmau · 01-07-2013, 04:30 PM

Thing is, I already have the same books on another Sony ereader and I'm not having any trouble [touch wood] viewing them on my computer in Calibre or on that reader.

I cant' believe it, I was working my way through sending you a detailed explanation of what was happening and second time round this morning - it all started working as it should. [Wouldn't do it for me yesterday when I needed it though]

Honest, there really was a problem but it seems to have disappeared!!! I will add, the strange symbol [small grey in the middles with red square around it] beside the epub is still there, but doesn't seem to affect the process now.

Something strange happened, but I can live with that for now.

Thank you so much for your input and very quick response.

Cheers

12-31-2012, 12:05 PM	#1
Loonybin65 Junior Member Posts: 2 Karma: 10 Join Date: Feb 2010 Device: Sony prs-505	Problem sending book to Sony PRS-T1 I have the latest update of Calibre, and today I added two books to my Calibre library. The first one showed a size of 0.3 MB. When I sent it to my ereader, it worked fine, but when you click on the Device icon, it shows the book having a size of 0.0 MB on the Sony reader. The full book is on the device though. Can anyone tell me why this is happening because I'm afraid that it won't show the accurate free space on my ereader in Calibre.

01-07-2013, 03:08 PM	#6
robynmau Member Posts: 18 Karma: 494132 Join Date: Aug 2011 Location: Darwin, Australia Device: Kindle	I've got the same problem Morning all Searched for assistance with sending books to my grand sons Sony PRS-T1. I am getting a strange symbol where the usual epub symbol is [it looks like a V inside a box] . I am using an external hard drive rather than the computer's disk. Found your thread, for the help, I will now check the device to see if the books are there or not. If they are on the device, I won't worry too much but like 'speakingtohe' I've added a lot of books and never had this problem before. Cheers Robyn PS: I've got Calibre 0.9.11 running and think this program is

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-T1 Problem with Audio on Sony PRS-T1	Primrose	Sony Reader	4	10-30-2011 03:35 PM
PRS-300 sony prs-300 problem	waspsoton	Sony Reader	1	07-06-2011 08:33 AM
Slight problem sending lrf files to Sony PRS-600	speakingtohe	Calibre	2	04-14-2010 01:50 AM
Crashes when sending to Sony PRS-600	SpyKiIIer	Calibre	3	01-12-2010 10:15 PM
Help me please. A problem with my Sony Prs 500.	efimero	Sony Reader	1	01-12-2010 05:27 PM

12-31-2012, 01:45 PM	#2
kovidgoyal creator of calibre Posts: 45,320 Karma: 27111242 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Probably because your reader cannot handle the book. Do an epub to epub conversion in calibre and then send the file to your reader.

01-01-2013, 12:59 AM	#3
AlexBell Wizard Posts: 3,413 Karma: 13369310 Join Date: May 2008 Location: Launceston, Tasmania Device: Sony PRS T3, Kobo Glo, Kindle Touch, iPad, Samsung SB 2 tablet	If it's any help I have successfully transferred 300 or so ebooks to my T1 with calibre. I think the problem is more likely with the ebook than with calibre - as I think Kovid is suggesting.

01-01-2013, 11:35 AM	#4
Loonybin65 Junior Member Posts: 2 Karma: 10 Join Date: Feb 2010 Device: Sony prs-505	Thank you so much for the suggestion, but unfortunately it didn't work . I have put hundreds of ebooks on my reader using Calibre but have never had this problem before. Like I said, the full book ends up on my reader - it just doesn't show the correct size. Any other suggestions would be greatly appreciated .

01-01-2013, 02:36 PM	#5
speakingtohe Wizard Posts: 4,812 Karma: 26912940 Join Date: Apr 2010 Device: sony PRS-T1 and T3, Kobo Mini and Aura HD, Tablet	I doubt that calibre uses the reported size of the books to determine how much data to write, although I could be wrong. Chances are it uses a call to the operating system to see how much free space there is. It is possible to overfill your ereader using calibre, as I did it once by putting on an audio book when I was very low on space (PRS-T1) IIRC the next time I connected the ereader calibre could not write the database, so I had to delete something(probably the audiobook) and all was well again. I would not worry too much about it, but you could check the file itself on the ereader and see what size the operating system reports. Helen

01-07-2013, 03:17 PM	#7
JSWolf Resident Curmudgeon Posts: 79,680 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Can this eBook that does not work on the T1 be viewed with ADE on your computer?

01-07-2013, 03:34 PM	#8
robynmau Member Posts: 18 Karma: 494132 Join Date: Aug 2011 Location: Darwin, Australia Device: Kindle	Thank you for getting back to me so quickly Unfortunately the book does not view on the computer. When I look to view I got an error message.

01-07-2013, 04:30 PM	#10
robynmau Member Posts: 18 Karma: 494132 Join Date: Aug 2011 Location: Darwin, Australia Device: Kindle	Thing is, I already have the same books on another Sony ereader and I'm not having any trouble [touch wood] viewing them on my computer in Calibre or on that reader. I cant' believe it, I was working my way through sending you a detailed explanation of what was happening and second time round this morning - it all started working as it should. [Wouldn't do it for me yesterday when I needed it though] Honest, there really was a problem but it seems to have disappeared!!! I will add, the strange symbol [small grey in the middles with red square around it] beside the epub is still there, but doesn't seem to affect the process now. Something strange happened, but I can live with that for now. Thank you so much for your input and very quick response. Cheers

Advert

Advert