Quote:
Originally Posted by Stephanos
Anyone know how to do this? The above poster chose not to share the solution. Whenever I try to add my custom font for LRF files via the Universal Flasher, my PRS+ functionality is wiped out. Then, when reflash the PRS+ firmware, I am back to the crappy Dutch Roman font for LRF files.
|
First check
this thread on how to create a custom (
you can use this tool vice a font program) tt0011m_.ttf font to substitute for your LRF font.
Here is the factory default and the prepared free fontin font for use as a replacemant lrf on the reader. Now that you have a properly prepared tt0011m_.ttf to replace the default complete the following steps.
Updated, step 3 critical to success.
1. Install PRS+ (skip if you already have it installed)
2. Use
Igorsk's Universal Flasher (I used a empty SD card).
3. You must verify that the folder files.505.1.1.00.18040 and the its subfolders (in SD Flasher) are empty.
Delete ALL files.
4. Place the customized tt0011m_.ttf file in the files.505.1.1.00.18040\opt\sony\ebook\FONT\ directory on the SD card.
5. If you want to update the
icons and
logo at this time, the new kBookIcon.png and kBookAssets.png files should be placed in the files.505.1.1.00.18040\opt\sony\ebook\application\ resources\scripts\ directory on the SD card.
6. Start (insert card into reader)
Igorsk's Universal Flasher make a new image (press 5).
7. Then
Flash the image (press 6).
That should do it, remove SD card, and allow it to reboot.