Quote:
Originally Posted by rkomar
I don't have any definitive answers for you. If you are handy with electronics, then you can probably find some JTAG pads on the motherboard and attach a JTAG->USB converter to it. If so, you could probably watch the console while it boots and look for error messages there.
I have a 902, but unfortunately I couldn't get the back off the device this time, so I wasn't able to look for the JTAG pads on my device.
|
I'm really not that savvy with hardware, unfortunately. I can take pictures of the board if it'll help! I'm not quite sure where they are on this model. The ones on Google look a little different. Are they just a series of holes in the board? Or a physical connector?