Quote:
Originally Posted by jackie_w
The Patch default '15 values' run from 0.7 --> 1.1.
Assuming that you're on the latest firmware version, 3.19.5761, try these in your libnickel.so.1.0.0.patch file:
Code:
# 15 values for replacement, change these to suit:
replace_float = 616F30, 1.0, 0.8
replace_float = 616FF8, 1.05, 0.85
replace_float = 617000, 1.07, 0.9
replace_float = 617008, 1.1, 0.92
replace_float = 616F38, 1.2, 0.94
replace_float = 617010, 1.35, 0.96
replace_float = 616F40, 1.5, 0.98
replace_float = 617018, 1.7, 1.0
replace_float = 617020, 1.8, 1.02
replace_float = 616F48, 2.0, 1.05
replace_float = 617028, 2.2, 1.1
replace_float = 617030, 2.4, 1.15
replace_float = 617038, 2.6, 1.2
replace_float = 617040, 2.8, 1.25
replace_float = 616F50, 3.0, 1.3
The new set of '15 values' will now run from 0.8 --> 1.3.
If it's still not suitable report back with perceived problems. |
. I copied the code over but I can't get the bat file to generate a new target zip. When I double click (using windows 7) it appears to flash but it goes away immediately.
