Quote:
Originally Posted by psychre
Firmware is US 1.1.00.18040
Customizer is 1.04 win
|
Two things to try.
1. Paperclip the reset button and immediately hook the Reader to USB. Try the updater.
Or (from the wiki)
# Use a paper clip or pin to depress the reset button in the small hole on the back of the unit. Turn the unit on.
# Wait until the "Starting up..." page is displayed for a few seconds and you see the orange LED blinking. Just count like 3 to 4 sec. from the moment you see the LED blinking.
# Repeat steps 1 and 2 ten times.
# On the tenth reset let the Reader boot and after a few minutes the message "Firmware update is not finished correctly. Please execute firmware update again." will be displayed.
# Connect the USB cable and the device will automatically go into recovery ("Updating firmware now...") mode. At that point, use the Sony updater.