Quote:
Originally Posted by BWinmill
There have been a couple of comments about you taking apart the Aura. Do you have any advice on how to disassemble the unit? (In particular, I'd like to know if it's held together with clips or glue.)
|
I have had the first one apart many times. It is all just clip like protrusions
and holes/slots that the bezel snaps into. There is one piece of tape that
seems to be there to seal the inside edge of the bezel to the surface of
the screen outside the viewing area. The tape separated easily the first
time I opened the Aura, and is still there and a little sticky after many
cleanings of the bezel.
I have opened and closed that one so many times that some of the thinner
slot edges are breaking away. This has not prevented the case from being
securely, even tightly closed up.
As to how to; I just run my thumbnail around the slot between the bezel and
the case. The corner of a good hard plastic card works fine and could reach in
to nudge the tape apart, as well.
Luck;
Ken