M-edge adds more cases for e-reader devices

Bob Russell · 02-04-2007, 03:57 PM

The folks at M-edge have been following some of the MobileRead discussions that have mentioned the Sony Reader leather jacket, and wanted to let everyone know that they also have a leather jacket and a silicon jacket for the iLiad. iLiad owners have had to put up with Sony Reader being in the spotlight quite a bit, so we want to point out that M-edge has twice as many cases available for the iLiad as the Reader. All the more important for protecting that big, beautiful screen!

This extends the case lineup to include the following:

ILiad Cases
* eMotion Leather Jacket (Preorder until Feb 15) $49.99
* eMotion Silicon Jacket (Preorder until Feb 15) $34.99
* eMotion Jacket $39.99
* eMotion Sleeve Jacket $34.99

Sony Reader Cases
* eMotion Leather Jacket (Preorder until Feb 5) $39.99
* eMotion Sleeve Jacket $34.99

Some of the prices listed below above are labeled "Sale", so prices may change over time. According to M-edge, more leather jacket colors are coming soon. Probably including red, brown, and possibly one other color. I'm sure that increased demand for the covers will bring incentive to add to their lineup.

Personally, I think the leather jacket might be a must-have item for many e-ink owners because of the added protection.

One concern for Sony Reader owners to keep in mind is whether the M-edge leather cover fits over the Sony accessory covers (or the Sony premium Dooney and Bourke leather cover if you have one). Snapping on and off those Reader covers is not something you would want to do frequently.

Update: The Sony leather jacket case does not allow the Reader to slide in with the standard cover attached. It turns out that the idea is to replace the Sony cover. That approach has its advantages - better protection and aesthetics, as well as integrated pockets and a pen loop for those that may take notes while reading.

vranghel · 02-04-2007, 08:31 PM

Ahhh.....i just bought a Jacket a few days ago...

The grapes are sour anyway!

NatCh · 02-05-2007, 01:21 AM

Still have the receipt?

Nightwing · 02-05-2007, 03:43 AM

Is the cover reinforced or just thick?

M-edge · 02-05-2007, 08:05 AM

The cover (and back) is a solid sheet of hardboard (~1/8" thick) that will not bend or flex without significant force.

CommanderROR · 02-05-2007, 08:11 AM

Nice to hear!

Good that you are still producing covers for the Iliad and even increasing the selection.
Maybe we'll soon see a cas/cover for the assorted STAReBOOK clones? Since there seem to be 3 companies using the same hardware to create their individual devices there could be a market there.
If Baen manages to get their thing going then there will be at least 1000 units around...and that on top of all the Chines and Taiwanes (and one German) guys already owning the STAReBOOK...maybe you'll look into it?

gandalfbp · 02-05-2007, 08:19 AM

Hi all,

just a short question: do you fix the Sony Reader with the hook on it's back? Like the standard case, with what the unit came originally?

Thanks:

Peter

imaredr · 02-05-2007, 10:01 AM

I like the case, but I don't want to give up haveing a color case. I will definitely get one once the color ones arrive. I hop this time that one is a definite pink. I'd also like a an off white one to match my Noreve TX Case or my Sena magenta case.

Ellen

Nightwing · 02-05-2007, 11:31 AM

Quote:

Originally Posted by M-edge

The cover (and back) is a solid sheet of hardboard (~1/8" thick) that will not bend or flex without significant force.

Thank you.

PS: Any pic of the inside with the reader?

EDIT: Found the view button on the site...

scotty1024 · 02-05-2007, 02:10 PM

Quote:

Originally Posted by M-edge

The cover (and back) is a solid sheet of hardboard (~1/8" thick) that will not bend or flex without significant force.

But will absorb moisture and go soft over time. Any plans to make a version using high density polyethelene?

vranghel · 02-08-2007, 01:18 AM

Quote:

Originally Posted by scotty1024

But will absorb moisture and go soft over time. Any plans to make a version using high density polyethelene?

I think you answered one of my questions for m-edge, scotty.

I'm using the reader in an environment with dust, and i was thinking if the rigid material inside wont soften/degrade if i wash the cover.

So, asking M-Edge: Is the rigid material in the cover, cardoard(carton)?

memobug · 02-09-2007, 02:01 AM

Does the Reader still fit into the docking stand with these aftermarket covers attached?

Regards,

Matt

NatCh · 02-09-2007, 02:13 AM

From the pictures, I'd say not.

Kirys · 02-09-2007, 02:35 AM

Is there an european distributor for the m-edge covers?

M-edge · 02-11-2007, 12:39 PM

To answer some of your questions;
1) The rigid material in our leather jacket is plastic.
2) Our jacket is designed to replace the stock reader case; so the reader will not fit into the M-edge jacket with the stock case attached.
3) We do not use the Sony "snap-lock" design to attach the reader to our jacket. The reader slides in behind a leather rim that holds the reader in place.
4) The reader will need to be removed from the jacket in order to fit into the dock.
5) We ship internationally from our website (www.buymedge.com); however, we are working on developing a european distribution channel.

02-04-2007, 03:57 PM	#1
Bob Russell Recovering Gadget Addict Posts: 5,381 Karma: 676161 Join Date: May 2004 Location: Pittsburgh, PA Device: iPad	M-edge adds more cases for e-reader devices The folks at M-edge have been following some of the MobileRead discussions that have mentioned the Sony Reader leather jacket, and wanted to let everyone know that they also have a leather jacket and a silicon jacket for the iLiad. iLiad owners have had to put up with Sony Reader being in the spotlight quite a bit, so we want to point out that M-edge has twice as many cases available for the iLiad as the Reader. All the more important for protecting that big, beautiful screen! This extends the case lineup to include the following: ILiad Cases * eMotion Leather Jacket (Preorder until Feb 15) $49.99 * eMotion Silicon Jacket (Preorder until Feb 15) $34.99 * eMotion Jacket $39.99 * eMotion Sleeve Jacket $34.99 Sony Reader Cases * eMotion Leather Jacket (Preorder until Feb 5) $39.99 * eMotion Sleeve Jacket $34.99 Some of the prices listed below above are labeled "Sale", so prices may change over time. According to M-edge, more leather jacket colors are coming soon. Probably including red, brown, and possibly one other color. I'm sure that increased demand for the covers will bring incentive to add to their lineup. Personally, I think the leather jacket might be a must-have item for many e-ink owners because of the added protection. One concern for Sony Reader owners to keep in mind is whether the M-edge leather cover fits over the Sony accessory covers (or the Sony premium Dooney and Bourke leather cover if you have one). Snapping on and off those Reader covers is not something you would want to do frequently. Update: The Sony leather jacket case does not allow the Reader to slide in with the standard cover attached. It turns out that the idea is to replace the Sony cover. That approach has its advantages - better protection and aesthetics, as well as integrated pockets and a pen loop for those that may take notes while reading.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accessories M-Edge - K3 Cases	Kevin2960	Amazon Kindle	15	10-04-2010 12:36 PM
Cases for the eNTourage eDGe	mgm1979	enTourage eDGe	39	04-22-2010 01:17 PM
New M-Edge Kindle Cases	daffy4u	Amazon Kindle	2	12-15-2009 01:35 AM
iLiad cases from M-edge are available for order	raevyn1	iRex	30	09-06-2008 07:33 AM
M-edge cases for the iRex Iliad and Sony Reader now available	CommanderROR	iRex	0	10-22-2006 04:30 PM

02-04-2007, 08:31 PM	#2
vranghel Addict Posts: 285 Karma: 10 Join Date: Apr 2006 Location: Vancouver, Canada Device: Proud Iliad owner	Ahhh.....i just bought a Jacket a few days ago... The grapes are sour anyway!

02-05-2007, 01:21 AM	#3
NatCh Gizmologist Posts: 11,615 Karma: 929550 Join Date: Jan 2006 Location: Republic of Texas Embassy at Jackson, TN Device: Pocketbook Touch HD3	Still have the receipt?

02-05-2007, 03:43 AM	#4
Nightwing Addict Posts: 303 Karma: 541 Join Date: Oct 2006 Device: Cowon A2 Dell x3i, Sony Reader & Eee PC!	Is the cover reinforced or just thick?

02-05-2007, 08:05 AM	#5
M-edge Member Posts: 10 Karma: 172 Join Date: Sep 2006 Device: samsung	The cover (and back) is a solid sheet of hardboard (~1/8" thick) that will not bend or flex without significant force.

02-05-2007, 08:11 AM	#6
CommanderROR eink fanatic Posts: 2,022 Karma: 4924 Join Date: Mar 2006 Location: Germany Device: STAReBOOK, iRex Iliad, Sony 505, Kindle 2	Nice to hear! Good that you are still producing covers for the Iliad and even increasing the selection. Maybe we'll soon see a cas/cover for the assorted STAReBOOK clones? Since there seem to be 3 companies using the same hardware to create their individual devices there could be a market there. If Baen manages to get their thing going then there will be at least 1000 units around...and that on top of all the Chines and Taiwanes (and one German) guys already owning the STAReBOOK...maybe you'll look into it?

02-05-2007, 08:19 AM	#7
gandalfbp Member Posts: 23 Karma: 10 Join Date: Oct 2006	Hi all, just a short question: do you fix the Sony Reader with the hook on it's back? Like the standard case, with what the unit came originally? Thanks: Peter

02-05-2007, 10:01 AM	#8
imaredr Collector Posts: 441 Karma: 1002238 Join Date: May 2005 Location: Harker Heights, Texas Device: Cybook	I like the case, but I don't want to give up haveing a color case. I will definitely get one once the color ones arrive. I hop this time that one is a definite pink. I'd also like a an off white one to match my Noreve TX Case or my Sena magenta case. Ellen

02-09-2007, 02:01 AM	#12
memobug Connoisseur Posts: 51 Karma: 46 Join Date: Jan 2007 Location: Silicon Valley Device: PRS-500/PRS-505/Kindle DX/iPhone 3G	Does the Reader still fit into the docking stand with these aftermarket covers attached? Regards, Matt

02-09-2007, 02:13 AM	#13
NatCh Gizmologist Posts: 11,615 Karma: 929550 Join Date: Jan 2006 Location: Republic of Texas Embassy at Jackson, TN Device: Pocketbook Touch HD3	From the pictures, I'd say not.

02-09-2007, 02:35 AM	#14
Kirys Zealot Posts: 122 Karma: 86 Join Date: Dec 2006 Location: Italy Device: Boox M90	Is there an european distributor for the m-edge covers?

Advert

Advert

02-11-2007, 12:39 PM	#15
M-edge Member Posts: 10 Karma: 172 Join Date: Sep 2006 Device: samsung	To answer some of your questions; 1) The rigid material in our leather jacket is plastic. 2) Our jacket is designed to replace the stock reader case; so the reader will not fit into the M-edge jacket with the stock case attached. 3) We do not use the Sony "snap-lock" design to attach the reader to our jacket. The reader slides in behind a leather rim that holds the reader in place. 4) The reader will need to be removed from the jacket in order to fit into the dock. 5) We ship internationally from our website (www.buymedge.com); however, we are working on developing a european distribution channel.