![]() |
#31 |
Junior Member
![]() Posts: 5
Karma: 10
Join Date: Jan 2012
Device: Sony PRS-T1
|
The no-refresh mode is very useful for the scrolling applications that don't understand the hardware buttons and/or paginated output (like rootexplorer, 3rd page of homescreen and aarddict)
It will be nice if hberntsen , in the next version of his app, will include also a button for switching to normal refresh mode without going to sony homescreen or reader |
![]() |
![]() |
![]() |
#32 |
Zealot
![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 144
Karma: 706
Join Date: Oct 2011
Device: Sony Reader PRS-T1
|
It might be even better to be able to use a gesture or a long press of a hadware key to change modes. Or else the app could have a toggle function without requiring you to click to close the app. You would run the app to switch from one mode to the other.
The ideal solution (but I think it wouldn't be easy to implement) is to copy the behaviour of the Sony Browser to the whole system: mode change if scrolling or zooming is detected and refresh half a second after scrolling/zooming ends. Another thought: Since if seems possible to change the mode with an apk, would it possible to set refresh mode 3 with an a similar apk? |
![]() |
![]() |
![]() |
#33 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 10
Karma: 1358
Join Date: Jan 2012
Device: PRS-T1
|
@MisterNo
I made a new version of the norefreshenabler app from post #16. After you install it, you get 2 apps, one to enable the no-refresh mode and another to restore the default. There is no close button anymore, it closes itself automatically. I tried closing the app immediately but when I do that the screen mode does not change, i added a timer with a 2 second duration and that works on my reader. Let me know if that time is not enough. @entodoays As far as I know there is no way to get the current updatemode of the screen, which is required to create a toggle app. It might be possible to use the code of the webbrowser and implement it into the android framework. Unfortunately, I don't have time for that at the moment. Holding a button to switch modes would be nice indeed. I know you can launch an app by holding the search button, do you know if you can do this with other buttons? I tried setting the mode to 3 in my app, I did that in the Iconizedlistview.zip in one of my posts earlier in this thread. Updatemode 3 just sets the updatemode of the listview and not the whole screen so that does not work. Last edited by hberntsen; 02-07-2012 at 03:00 PM. |
![]() |
![]() |
![]() |
#34 | |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 12
Karma: 548
Join Date: Feb 2012
Device: PRS T1
|
tried with firmwire 1.0.03.11140 replaced framwork.jar & framework.odex under recovery mode, boot no problem. But seems no use at all.
Quote:
|
|
![]() |
![]() |
![]() |
#35 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 10
Karma: 1358
Join Date: Jan 2012
Device: PRS-T1
|
I changed the files while the prs-t1 was in android, after a reboot I saw the effect immediately.
|
![]() |
![]() |
![]() |
#36 | |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 12
Karma: 548
Join Date: Feb 2012
Device: PRS T1
|
Quote:
Is there any mistake I've made? maybe caused by firmware difference? |
|
![]() |
![]() |
![]() |
#37 |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 12
Karma: 548
Join Date: Feb 2012
Device: PRS T1
|
omg....my bad.
I've put incorrect files back into /system/framework folder. I mistakenly put framework.jar & framework.odex under /frameword(unpacked from framework.rar after put back the correct file and reboot the device,it just happens magically. Thx very much for your hard work! |
![]() |
![]() |
![]() |
#38 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 10
Karma: 1358
Join Date: Jan 2012
Device: PRS-T1
|
Im glad it worked
![]() |
![]() |
![]() |
![]() |
#39 | |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 12
Karma: 548
Join Date: Feb 2012
Device: PRS T1
|
Quote:
I didn't realized your "framework files currently on my device' was meant to be folder name at first ![]() It would be better to reupload files need to be replaced but not a whole package at all to avoid such mistake though. I'd like to post a instruction on how to get it done under recovery mode if it is okay for me to use your file? |
|
![]() |
![]() |
![]() |
#40 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 10
Karma: 1358
Join Date: Jan 2012
Device: PRS-T1
|
Ah ok so you also have firmware version 1.0.00.09010?
Of course you may provide instructions/reupload files, no problem als long as you include my username in your post ![]() |
![]() |
![]() |
![]() |
#41 | |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 12
Karma: 548
Join Date: Feb 2012
Device: PRS T1
|
Quote:
I would like to post a blog introduce this device and your patch later and comes with a full instruction on how to do it from start. With your refresh patch, this device is one step left toward perfect. (still looking forward for button listening service though ![]() P.S.:I've tried to replace these files with adb commands, but without fortune, it will not release the space occupied by framework.odex of 6 more megabyte lol |
|
![]() |
![]() |
![]() |
#42 | |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 13
Karma: 662
Join Date: Jan 2012
Device: PRS-T1
|
Quote:
Funnily I also put frameword at some point when compiling! I've attached my files compiled for firmware 1.0.0.3.11140, but it's the same changes as the other one |
|
![]() |
![]() |
![]() |
#43 | |
Member
![]() ![]() ![]() ![]() ![]() ![]() Posts: 12
Karma: 548
Join Date: Feb 2012
Device: PRS T1
|
Quote:
![]() Space discrepancy might be caused by the file to be replaced is in use at the time i think, so get it changed under recovery mode might be more safer, but it just get a little bit inconvenient to do it for every time. To get it done by a update pack is the most elegant way I think,but I'm not quite familiar with it, so I will also take a look and maybe give it a shot. Anyways,really appreciate your brilliant works! (ezPDF seems usable with this patch at the moment. But for pdf stuff I still prefer to read it on iLiad, to say, stay with iLiad's batter life is definitely a torture) |
|
![]() |
![]() |
![]() |
#44 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Feb 2012
Device: Sony T1
|
![]() I think it'll better works, if after removing finger, display will be refreshed. As in browser. How do that? |
![]() |
![]() |
![]() |
#45 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Feb 2012
Device: Sony T1
|
Is it possible to join 2 shortcuts in 1?
If activated no-refresh mode - shortcut function is activate default refresh mode and vice versa. |
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
USB Host Mode (Master Mode) on K3 | ericepe | Kindle Developer's Corner | 1 | 01-24-2012 04:59 AM |
Request Safe mode or recovery mode for Pocket Edge? | felixblackcat | enTourage eDGe | 25 | 01-08-2012 05:07 PM |
What Does Everyone think of the K3 refresh | Scarpad | Amazon Kindle | 6 | 08-29-2010 10:00 PM |
After refresh | maxhyl | iRex | 1 | 11-23-2008 03:50 AM |