PRS-T1 Case Sony PRS T1 - Page 2

Klein Nijenhuis · 10-06-2011, 10:10 PM

Quote:

Originally Posted by Notrite

alot of people are complaining about the plastic gloss over the sides of T1, so maybe a case like below which covers all four sides would be cool and i would see alot of people buying into that:

True, we also think that looks better. We are developing such case now, also with a light built in it. But we will start with the basic version, the extended version will follow by the end of october.

JSWolf · 10-06-2011, 10:11 PM

Quote:

Originally Posted by Klein Nijenhuis

True, we also think that looks better. We are developing such case now, also with a light built in it. But we will start with the basic version, the extended version will follow by the end of october.

Can you show pictures of the proposed design of the light cover? How much will it be?

oldgold · 10-06-2011, 10:50 PM

Hi all

Am new to the forum and awaiting delivery of my new Sony Reader.

Just a quick question .. will the cover with built in light run off a separate AAA battery?

Thank you and cheers

Bookworm_Girl · 10-06-2011, 10:56 PM

Quote:

Originally Posted by oldgold

Hi all

Am new to the forum and awaiting delivery of my new Sony Reader.

Just a quick question .. will the cover with built in light run off a separate AAA battery?

Thank you and cheers

Welcome to MobileRead, oldgold! Yes, the lighted cover uses one AAA battery. It even came with one in the box. Good luck staying patient while you wait for your new reader to arrive!

Notrite · 10-07-2011, 12:01 AM

Quote:

Originally Posted by Klein Nijenhuis

True, we also think that looks better. We are developing such case now, also with a light built in it. But we will start with the basic version, the extended version will follow by the end of october.

Phew

! i was close to buying the standard sony covers. Definitely will buy one once the this case comes out.

graycyn · 10-07-2011, 01:16 AM

Quote:

Originally Posted by Klein Nijenhuis

True, we also think that looks better. We are developing such case now, also with a light built in it. But we will start with the basic version, the extended version will follow by the end of october.

I like the sound of that! However, be careful that the sleeve design does not interfere with the ability to tap into the corner for bookmarks.

I had a similar sleeve style case made by JAVOedge for my Nook, and the sleeve was just bulky enough to make it difficult sometimes to access menu options on the LCD screen easily. I ended up replacing it with an Oberon cover because of that.

Speaking of which, I tossed hubby's new T-1 temporarily into the old JAVOedge original Nook case, it swims in it! But I can see the look of that style of case being pretty nice being QUITE nice if fitted to the T-1.

beespeckled · 10-07-2011, 02:06 AM

Klein, nice looking cover

oldgold · 10-07-2011, 03:22 AM

Quote:

Originally Posted by Bookworm_Girl

Welcome to MobileRead, oldgold! Yes, the lighted cover uses one AAA battery. It even came with one in the box. Good luck staying patient while you wait for your new reader to arrive!

Hi Bookworm Girl, thank you for the welcome

but apologies, I was referring to the new book cover (with light) that will be available from Klein.

Cheers

salines · 10-07-2011, 05:56 AM

I also like the cover posted by Notrite.

I don't like the shiny box of the T1 - and with this cover I will not see it ;-)

sabredog · 10-07-2011, 07:00 AM

Quote:

Originally Posted by Notrite

alot of people are complaining about the plastic gloss over the sides of T1, so maybe a case like below which covers all four sides would be cool and i would see alot of people buying into that:

This is the case I have for my PRS-650 and I removed the inside cover holders with a sharp scalpel and steel rule. Otherwise it is a fantastic case.

Gecko covers are nicely made. I have reviewed one earlier for the Kobo and have one here for the Kobo Touch, which I cannot review properly as obtaining a Kobo Touch has become impossible at this time.

I just bit the bullet and purchased a PRS-T1.

azxswq · 10-08-2011, 07:49 AM

I don't know if they have this any more, but the netbook Kensington neoprene pouch, is PERFECT for the T1, it fits horizontally, and you can do a easy double fold for it. To me, that is all I need. I can even clip the stylus on the inside Kensington label. $5. (Because the of the weight advantage, I never wanted to add excess weight to it.)

http://www.amazon.com/Kensington-Ess...9&sr=8-1-spell

I got this on AT&T wireless for about $5. from a deal they had.

No, it is not a case, but it is a perfect pouch.

komugi · 10-16-2011, 11:04 PM

Looks nice, would wait for a built in light one

Firedb · 10-17-2011, 02:25 AM

Quote:

Originally Posted by sabredog

This is the case I have for my PRS-650 and I removed the inside cover holders with a sharp scalpel and steel rule. Otherwise it is a fantastic case.

Gecko covers are nicely made. I have reviewed one earlier for the Kobo and have one here for the Kobo Touch, which I cannot review properly as obtaining a Kobo Touch has become impossible at this time.

I just bit the bullet and purchased a PRS-T1.

I definately prefer a T1 cover that hides the gloss bezel, and one that does not have any inside pockets

sabredog · 10-17-2011, 02:29 AM

There are not many around for the T1 as yet, but my 650 does look great inside the case illustrated... once I performed excision surgery on the inside pocket.

Mr Fujisawa · 10-17-2011, 04:13 AM

Can this cover be wrapped round the back when reading for holding with one hand? I have the official sony cover with light for my 650, but the edges are quite sharp and its not great at being bent round the back like that. I have a T1 coming and no case bought so trying to see what's out there

10-08-2011, 07:49 AM	#26
azxswq Connoisseur Posts: 52 Karma: 10 Join Date: Sep 2011 Location: NYC Device: PRS-T1 Black, T2 Black	I don't know if they have this any more, but the netbook Kensington neoprene pouch, is PERFECT for the T1, it fits horizontally, and you can do a easy double fold for it. To me, that is all I need. I can even clip the stylus on the inside Kensington label. $5. (Because the of the weight advantage, I never wanted to add excess weight to it.) http://www.amazon.com/Kensington-Ess...9&sr=8-1-spell I got this on AT&T wireless for about $5. from a deal they had. No, it is not a case, but it is a perfect pouch. Last edited by azxswq; 10-08-2011 at 07:51 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sell Sony PRS-350 plus case (both pink)	witeowl	Flea Market	11	05-09-2018 11:20 AM
Ended NEW SONY PRS-350 with genuine SONY case	pashlit	Flea Market	21	07-05-2011 03:55 PM
Ended Sony PRS 600 with case	just_kev	Flea Market	3	09-10-2010 03:28 AM
Ended Sony PRS-300 w/Leather Case	jhempel24	Flea Market	3	08-19-2010 09:12 AM
Ended Sony PRS-600 (black) with Sony case (USD $170 shipped)	AlexC	Flea Market	4	06-03-2010 08:30 PM

10-06-2011, 10:50 PM	#18
oldgold Junior Member Posts: 6 Karma: 10 Join Date: Sep 2011 Location: Western Australia Device: Sony PRS-T1	Hi all Am new to the forum and awaiting delivery of my new Sony Reader. Just a quick question .. will the cover with built in light run off a separate AAA battery? Thank you and cheers

10-07-2011, 02:06 AM	#22
beespeckled Groupie Posts: 162 Karma: 80874 Join Date: Apr 2010 Location: Pacific NW USA Device: KOBO Aura One; Kindle Oasis 3, KOBO Libra Colour	Klein, nice looking cover

10-07-2011, 05:56 AM	#24
salines Zealot Posts: 127 Karma: 744 Join Date: Oct 2011 Device: Sony PRS-T1	I also like the cover posted by Notrite. I don't like the shiny box of the T1 - and with this cover I will not see it ;-)

10-16-2011, 11:04 PM	#27
komugi Zealot Posts: 109 Karma: 254 Join Date: Jun 2009 Device: Surface Pro 3, HTC 10, Kobo Aura H2O	Looks nice, would wait for a built in light one

10-17-2011, 02:29 AM	#29
sabredog Geographically Restricted Posts: 2,629 Karma: 14933353 Join Date: Dec 2008 Location: Perth, Australia Device: Sony PRS-T3, Kindle Voyage, iPad Air2, Nexus7v2	There are not many around for the T1 as yet, but my 650 does look great inside the case illustrated... once I performed excision surgery on the inside pocket.

10-17-2011, 04:13 AM	#30
Mr Fujisawa Member Posts: 15 Karma: 10 Join Date: Dec 2010 Location: London, UK Device: Sony Reader PRS-T1	Can this cover be wrapped round the back when reading for holding with one hand? I have the official sony cover with light for my 650, but the edges are quite sharp and its not great at being bent round the back like that. I have a T1 coming and no case bought so trying to see what's out there

Advert

Advert