06-28-2024, 05:41 PM | #1 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Help me rooting the Go 10.3
Thanks to our Renate where this far.
Code:
C:\Users\User>adb reboot edl C:\Users\User>edl.exe /lA235F_LOADER_BIT5_Alephgsm_com.elf Found EDL 9008, handshaking... version 2.1 HWID: 001b80e100000000, JTAG: 001b80e1, OEM: 0000, Model: 0000 Hash: d40eee56f3194665-574109a39267724a-e7944134cd53cb76-7e293d3c40497955-bc8a4519ff992b03-1fadc6355015ac87 (x3) Sending A235F_LOADER_BIT5_Alephgsm_com.elf 100% ok, starting... ok, waiting for Firehose... ok Code:
C:\Users\User>edl /u /g Found EDL 9008, configuring... ok Requesting info on LUN 0... ok Requesting GPT 0 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 1 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 2 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 3 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 4 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 5 header... ok, receiving... ok, requesting entries... ok, receiving... ok LUN # Name Start Count Type ─── ── ──────────────── ────────── ────────── ──────────────────── 0 1 ssd 6 2 Secure SW download 0 2 persist 8 8192 Persist 0 3 misc 8200 256 Misc 0 4 keystore 8456 128 Key store 0 5 frp 8584 128 FRP 0 6 super 8712 1048576 Super 0 7 recovery_a 1057288 24576 Recovery 0 8 recovery_b 1081864 24576 352b8083 0 9 vbmeta_system_a 1106440 16 VB meta system 0 10 vbmeta_system_b 1106456 16 fe3ab853 0 11 metadata 1106472 4096 988a98c9 0 12 onyxconfig 1110568 6144 System 0 13 userdata 1116712 13390291 User data 1 1 xbl_a 6 896 Bootloader 1 2 xbl_config_a 902 32 Boot config 1 3 last_parti 934 1109 Empty 2 1 xbl_b 6 896 Bootloader 2 2 xbl_config_b 902 32 Boot config 2 3 last_parti 934 1109 Empty 3 1 ALIGN_TO_128K_1 6 26 fde1604b 3 2 cdt 32 32 CDT 3 3 ddr 64 256 DDR 3 4 last_parti 320 32443 Empty 4 1 rpm_a 6 128 Inactive 4 2 tz_a 134 1024 Inactive 4 3 hyp_a 1158 128 Inactive 4 4 modem_a 1286 46080 Inactive 4 5 bluetooth_a 47366 256 Inactive 4 6 mdtpsecapp_a 47622 1024 Inactive 4 7 mdtp_a 48646 8192 Inactive 4 8 abl_a 56838 256 Inactive 4 9 dsp_a 57094 8192 Inactive 4 10 keymaster_a 65286 128 Inactive 4 11 boot_a 65414 24576 Inactive 4 12 cmnlib_a 89990 128 Inactive 4 13 cmnlib64_a 90118 128 Inactive 4 14 devcfg_a 90246 32 Inactive 4 15 qupfw_a 90278 16 Inactive 4 16 vbmeta_a 90294 16 Inactive 4 17 dtbo_a 90310 6144 Inactive 4 18 imagefv_a 96454 512 Inactive 4 19 uefisecapp_a 96966 512 be8a7e08 4 20 featenabler_a 97478 32 741813d2 4 21 multiimgoem_a 97510 8 Inactive 4 22 rpm_b 97518 128 Resource/power mgmt 4 23 tz_b 97646 1024 TrustZone 4 24 hyp_b 98670 128 Hypervisor 4 25 modem_b 98798 46080 FAT32 4 26 bluetooth_b 144878 256 Bluetooth 4 27 mdtpsecapp_b 145134 1024 MDTP secure 4 28 mdtp_b 146158 8192 MDTP 4 29 abl_b 154350 256 Android bootloader 4 30 dsp_b 154606 8192 DSP 4 31 keymaster_b 162798 128 Key master 4 32 boot_b 162926 24576 Boot 4 33 cmnlib_b 187502 128 Common lib 4 34 cmnlib64_b 187630 128 Common lib64 4 35 devcfg_b 187758 32 Device config 4 36 qupfw_b 187790 16 QUP firmware 4 37 vbmeta_b 187806 16 VB meta 4 38 dtbo_b 187822 6144 DTBO 4 39 featenabler_b 193966 32 Inactive 4 40 imagefv_b 193998 512 Image FV 4 41 uefisecapp_b 194510 512 Inactive 4 42 multiimgoem_b 195022 8 e126a436 4 43 devinfo 195030 1 Device info 4 44 dip 195031 256 DIP 4 45 apdp 195287 64 APDP 4 46 spunvm 195351 2048 Spun VM 4 47 splash 197399 8356 Splash 4 48 limits 205755 1 Limits 4 49 toolsfv 205756 256 Tools FV 4 50 logfs 206012 2048 Log FS 4 51 cateloader 208060 512 STI 4 52 rawdump 208572 32768 RAM dump 4 53 logdump 241340 16384 Log dump 4 54 storsec 257724 32 Store secure 4 55 multiimgqti 257756 8 846c6f05 4 56 uefivarstore 257764 128 165bd6bc 4 57 secdata 257892 7 76cfc7ef 4 58 catefv 257899 128 Cate FV 4 59 catecontentfv 258027 256 Cate content FV 4 60 last_parti 258283 790288 Empty 5 1 ALIGN_TO_128K_2 6 26 6891a3b7 5 2 modemst1 32 512 Modem ST1 5 3 modemst2 544 512 Modem ST2 5 4 fsg 1056 512 Modem storage 5 5 fsc 1568 32 FSC 5 6 last_parti 1600 31163 Empty Code:
C:\Users\User>edl /u /r /pmisc misc.img Found EDL 9008, configuring... ok Requesting info on LUN 0... ok Requesting GPT 0 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 1 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 2 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 3 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 4 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 5 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting read misc.img... ok, reading 100% ok |
06-28-2024, 08:12 PM | #2 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
Hmm... Could you:
Code:
fastboot oem device-info |
Advert | |
|
06-29-2024, 01:31 AM | #3 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Code:
C:\Program Files (x86)\ADB & Fastboot++>adb reboot bootloader * daemon not running; starting now at tcp:removed * daemon started successfully C:\Program Files (x86)\ADB & Fastboot++>fastboot devices removed fastboot C:\Program Files (x86)\ADB & Fastboot++>fastboot oem device-info (bootloader) Verity mode: true (bootloader) Device unlocked: true (bootloader) Device critical unlocked: true (bootloader) Charger screen enabled: true OKAY [ 0.004s] Finished. Total time: 0.004s |
06-29-2024, 03:31 AM | #4 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
I have tried to do a full raw backup. But no luck.
Can tell me the proper way of doing this in this context? Code:
C:\Users\User>edl.exe /r /c32763 mybackup Found EDL 9008, configuring... ok Requesting info on LUN 0... <log value="ERROR: Failed to open the SDCC Device slot 0 partition 0" /> <log value="ERROR: Failed to open the device:1 slot:0 partition:0 error:0" /> <log value="ERROR: OPEN handle NULL and no error, weird 203922644" /> <log value="ERROR: Failed to open device, type:eMMC, slot:0, lun:0 error:3" /> Nope |
06-29-2024, 06:37 AM | #5 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
You're UFS, always use "/u" (except when loading Firehose loader initially).
Why, "/c32763"? You don't want a full backup, only an arbitrary 32763 sectors? Code:
edl /r mybackup Code:
adb reboot fastboot fastboot flash misc misc.img fastboot reboot |
Advert | |
|
06-29-2024, 06:59 AM | #6 | |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Quote:
Code:
C:\Users\User>fastboot flash misc misc.img Sending 'misc' (1024 KB) OKAY [ 0.024s] Writing 'misc' FAILED (remote: 'Unrecognized command flash') fastboot: error: Command failed Code:
C:\Users\User>fastboot oem dmesg FAILED (remote: 'Command not supported in default implementation') fastboot: error: Command failed |
|
06-29-2024, 10:03 AM | #7 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
|
06-29-2024, 11:10 AM | #8 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
Could you do me a favor?
This is not directly related to this, but it helps me generally. Code:
edl /u0 /r /c8 mbr0 edl /u1 /r /c8 mbr1 edl /u2 /r /c8 mbr2 edl /u3 /r /c8 mbr3 edl /u4 /r /c8 mbr4 edl /u5 /r /c8 mbr5 |
06-29-2024, 01:10 PM | #9 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Yes I can ofc.
Code:
C:\Users\User>edl /u0 /r /c8 mbr0 Found EDL 9008, configuring... ok Requesting info on LUN 0... ok Requesting read mbr0... ok, reading 100% ok C:\Users\User>edl /u1 /r /c8 mbr1 Found EDL 9008, configuring... ok Requesting info on LUN 1... ok Block count specified extends past end of device C:\Users\User>edl /u2 /r /c8 mbr2 Found EDL 9008, configuring... ok Requesting info on LUN 2... ok Block count specified extends past end of device C:\Users\User>edl /u3 /r /c8 mbr3 Found EDL 9008, configuring... ok Requesting info on LUN 3... ok Requesting read mbr3... ok, reading 100% ok C:\Users\User>edl /u4 /r /c8 mbr4 Found EDL 9008, configuring... ok Requesting info on LUN 4... ok Requesting read mbr4... ok, reading 100% ok C:\Users\User>edl /u5 /r /c8 mbr5 Found EDL 9008, configuring... ok Requesting info on LUN 5... ok Requesting read mbr5... ok, reading 100% ok edl /u1 /r /c8 mbr1 edl /u2 /r /c8 mbr2 "Error": Block count specified extends past end of device Thus I dont have the 2 files, please don't hesitate to ask more questions |
06-29-2024, 01:26 PM | #10 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
|
06-29-2024, 01:42 PM | #11 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
This is the output:
Code:
C:\Users\User>edl /u1 /r /v lun1 Found EDL 9008, configuring... <log value="INFO: Calling handler for configure" /> <log value="INFO: Storage type set to value UFS" /> <response value="ACK" MemoryName="UFS" MinVersionSupported="1" Version="1" MaxPayloadSizeToTargetInBytes="65536" MaxPayloadSizeToTargetInBytesSupported="1048576" MaxXMLSizeInBytes="4096" DateTime="Jan 10 2024 - 18:16:46" /> Ok Requesting info on LUN 1... <log value="INFO: Calling handler for getstorageinfo" /> <log value="INFO: Device Total Logical Blocks: 0x800" /> <log value="INFO: Device Block Size in Bytes: 0x1000" /> <log value="INFO: Device Total Physical Partitions: 0x6" /> <log value="INFO: Device Manufacturer ID: 0xa25" /> <log value="INFO: Device Serial Number: 0x4f4e0000" /> <log value="INFO: {"storage_info": {"total_blocks":2048, "block_size":4096, "page_size":4096, "num_physical":6, "manufacturer_id":2597, "serial_num":1330511872, "fw_version":"1.7","mem_type":"UFS","prod_name":"eUFS2.2_064"}}" /> <log value="INFO: UFS fInitialized: 0x1" /> <log value="INFO: UFS Current LUN Number: = 0x1" /> <log value="INFO: UFS Total Active LU: 0x6" /> <log value="INFO: UFS wManufacturerID: 0xa25" /> <log value="INFO: UFS Boot Partition Enabled: 0x1" /> <log value="INFO: UFS Raw Device Capacity: = 0x7746000" /> <log value="INFO: UFS Min Block Size: 0x8" /> <log value="INFO: UFS Erase Block Size: 0x2000" /> <log value="INFO: UFS Allocation Unit Size: 0x1" /> <log value="INFO: UFS RPMB ReadWrite Size: = 0x40" /> <log value="INFO: UFS Number of Allocation Uint for This LU: 0x6" /> <log value="INFO: UFS Logical Block Size: 0xc" /> <log value="INFO: UFS Provisioning Type: 0x2" /> <log value="INFO: UFS LU Write Protect: 0x1" /> <log value="INFO: UFS Boot LUN ID: = 0x1" /> <log value="INFO: UFS Memory Type: 0x3" /> <log value="INFO: UFS LU Total Blocks: 0x800" /> <log value="INFO: UFS Supported Memory Types: 0x807f" /> <log value="INFO: UFS dEnhanced1MaxNAllocU: 0x3ba3" /> <log value="INFO: UFS wEnhanced1CapAdjFac: 0x300" /> <log value="INFO: UFS dEnhanced2MaxNAllocU: = 0x3ba3" /> <log value="INFO: UFS wEnhanced2CapAdjFac: 0x300" /> <log value="INFO: UFS dEnhanced3MaxNAllocU: 0x3ba3" /> <log value="INFO: UFS wEnhanced3CapAdjFac: 0x300" /> <log value="INFO: UFS dEnhanced4MaxNAllocU: 0x0" /> <log value="INFO: UFS wEnhanced4CapAdjFac: 0x0" /> <log value="INFO: UFS LUN Enable Bitmask: 0x3f" /> <log value="INFO: UFS Logical Block Count: 0x800" /> <log value="INFO: UFS bConfigDescrLock: 0x0" /> <log value="INFO: UFS iManufacturerName String Index: 0x1" /> <log value="INFO: UFS iProductName String Index: 0x2" /> <log value="INFO: UFS iSerialNumber String Index: 0x4" /> <log value="INFO: UFS iOemID String Index: 0x3" /> <log value="INFO: UFS Inquiry Command Output: PHISON eUFS2.2_064 01.7 " /> <response value="ACK" rawmode="false" /> Ok Requesting read lun1... <log value="INFO: Calling handler for read" /> <response value="ACK" rawmode="true" /> Ok, reading 100% <response value="ACK" rawmode="false" /> Ok I will delete that file |
06-29-2024, 01:56 PM | #12 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
Thank you very much!
I don't have any UFS devices to hand now so it's hard to get this stuff right. There's a new version of edl.exe up, download it. Could you do the remaining ones again: Code:
edl /u1 /r /c8 mbr1 edl /u2 /r /c8 mbr2 That will be six files, the total size will be around 64 GB. (Do mine first, they're shorter!) |
06-29-2024, 02:02 PM | #13 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Done see attached file.
Going to do the backup, tnx for letting me know the rough file size. At least that I know it is going well. |
06-29-2024, 02:51 PM | #14 |
Connoisseur
Posts: 51
Karma: 10
Join Date: Jun 2024
Device: Boox Go 10.3
|
Tnx for including an error msg. Makes sense now and in combo with:
Code:
C:\Users\User>edl /u /g (UFS, always use "/u" (except when loading Firehose loader initially). For non technical people: Run: C:\Users\User>edl.exe /lA235F_LOADER_BIT5_Alephgsm_com.elf (^for this device this is the loader. Use /l<nameloader>) C:\Users\User>edl /u /g This will output something like this below: Code:
C:\Users\User>edl /u /g Found EDL 9008, configuring... ok Requesting info on LUN 0... ok Requesting GPT 0 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 1 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 2 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 3 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 4 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting GPT 5 header... ok, receiving... ok, requesting entries... ok, receiving... ok LUN # Name Start Count Type ─── ── ──────────────── ────────── ────────── ──────────────────── 0 1 ssd 6 2 Secure SW download 0 2 persist 8 8192 Persist 0 3 misc 8200 256 Misc 0 4 keystore 8456 128 Key store 0 5 frp 8584 128 FRP 0 6 super 8712 1048576 Super 0 7 recovery_a 1057288 24576 Recovery 0 8 recovery_b 1081864 24576 352b8083 0 9 vbmeta_system_a 1106440 16 VB meta system 0 10 vbmeta_system_b 1106456 16 fe3ab853 0 11 metadata 1106472 4096 988a98c9 0 12 onyxconfig 1110568 6144 System 0 13 userdata 1116712 13390291 User data 1 1 xbl_a 6 896 Bootloader 1 2 xbl_config_a 902 32 Boot config 1 3 last_parti 934 1109 Empty 2 1 xbl_b 6 896 Bootloader 2 2 xbl_config_b 902 32 Boot config 2 3 last_parti 934 1109 Empty 3 1 ALIGN_TO_128K_1 6 26 fde1604b 3 2 cdt 32 32 CDT 3 3 ddr 64 256 DDR 3 4 last_parti 320 32443 Empty 4 1 rpm_a 6 128 Inactive 4 2 tz_a 134 1024 Inactive 4 3 hyp_a 1158 128 Inactive 4 4 modem_a 1286 46080 Inactive 4 5 bluetooth_a 47366 256 Inactive 4 6 mdtpsecapp_a 47622 1024 Inactive 4 7 mdtp_a 48646 8192 Inactive 4 8 abl_a 56838 256 Inactive 4 9 dsp_a 57094 8192 Inactive 4 10 keymaster_a 65286 128 Inactive 4 11 boot_a 65414 24576 Inactive 4 12 cmnlib_a 89990 128 Inactive 4 13 cmnlib64_a 90118 128 Inactive 4 14 devcfg_a 90246 32 Inactive 4 15 qupfw_a 90278 16 Inactive 4 16 vbmeta_a 90294 16 Inactive 4 17 dtbo_a 90310 6144 Inactive 4 18 imagefv_a 96454 512 Inactive 4 19 uefisecapp_a 96966 512 be8a7e08 4 20 featenabler_a 97478 32 741813d2 4 21 multiimgoem_a 97510 8 Inactive 4 22 rpm_b 97518 128 Resource/power mgmt 4 23 tz_b 97646 1024 TrustZone 4 24 hyp_b 98670 128 Hypervisor 4 25 modem_b 98798 46080 FAT32 4 26 bluetooth_b 144878 256 Bluetooth 4 27 mdtpsecapp_b 145134 1024 MDTP secure 4 28 mdtp_b 146158 8192 MDTP 4 29 abl_b 154350 256 Android bootloader 4 30 dsp_b 154606 8192 DSP 4 31 keymaster_b 162798 128 Key master 4 32 boot_b 162926 24576 Boot 4 33 cmnlib_b 187502 128 Common lib 4 34 cmnlib64_b 187630 128 Common lib64 4 35 devcfg_b 187758 32 Device config 4 36 qupfw_b 187790 16 QUP firmware 4 37 vbmeta_b 187806 16 VB meta 4 38 dtbo_b 187822 6144 DTBO 4 39 featenabler_b 193966 32 Inactive 4 40 imagefv_b 193998 512 Image FV 4 41 uefisecapp_b 194510 512 Inactive 4 42 multiimgoem_b 195022 8 e126a436 4 43 devinfo 195030 1 Device info 4 44 dip 195031 256 DIP 4 45 apdp 195287 64 APDP 4 46 spunvm 195351 2048 Spun VM 4 47 splash 197399 8356 Splash 4 48 limits 205755 1 Limits 4 49 toolsfv 205756 256 Tools FV 4 50 logfs 206012 2048 Log FS 4 51 cateloader 208060 512 STI 4 52 rawdump 208572 32768 RAM dump 4 53 logdump 241340 16384 Log dump 4 54 storsec 257724 32 Store secure 4 55 multiimgqti 257756 8 846c6f05 4 56 uefivarstore 257764 128 165bd6bc 4 57 secdata 257892 7 76cfc7ef 4 58 catefv 257899 128 Cate FV 4 59 catecontentfv 258027 256 Cate content FV 4 60 last_parti 258283 790288 Empty 5 1 ALIGN_TO_128K_2 6 26 6891a3b7 5 2 modemst1 32 512 Modem ST1 5 3 modemst2 544 512 Modem ST2 5 4 fsg 1056 512 Modem storage 5 5 fsc 1568 32 FSC 5 6 last_parti 1600 31163 Empty Code:
edl /u0 /r mybackupu0 edl /u1 /r mybackupu1 edl /u2 /r mybackupu2 edl /u3 /r mybackupu3 edl /u4 /r mybackupu4 edl /u5 /r mybackupu5 As an backup is handy, hence I writing this. Last edited by DanyDanman; 06-29-2024 at 02:55 PM. |
06-29-2024, 02:59 PM | #15 |
Onyx-maniac
Posts: 3,279
Karma: 13468977
Join Date: Feb 2012
Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6
|
Yeah, the number of possible options gets up there.
That's why I asked you for those mbr's so I can have my own "play it at home" version to double-check everything. Code:
E:\>edl /u4 /r /pdip dip Found EDL 9008, configuring... nope, configuring... ok Requesting info on LUN 4... ok Requesting GPT 4 header... ok, receiving... ok, requesting entries... ok, receiving... ok Requesting read dip... ok, reading 100% ok |
Thread Tools | Search this Thread |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Color Need help un-rooting! | banjobama | Nook Color & Nook Tablet | 4 | 03-23-2012 10:08 AM |
Rooting? | Alantra | Kobo Tablets | 6 | 01-06-2012 02:04 AM |
Color re-rooting | MusingCoyote | Nook Developer's Corner | 4 | 01-01-2012 07:18 PM |
Rooting | ectoplasm | Kindle Fire | 25 | 12-04-2011 01:26 PM |
Rooting a 1.1 ... | Cpl Punishment | Nook Developer's Corner | 45 | 02-20-2011 02:56 AM |