PRS-600 Cannot mount internal memory on Ubuntu 10.04 2.6.32-17-generic

marcchehab · 03-25-2010, 12:21 PM

Dear Ladies and Gentlemen

I can usually fix my issues well, but not it seems I'm really stuck. My ubuntu doesn't recognise the internal memory of my prs-600. My memory stick in the prs-600 works. But I cannot use calibre obviously.

The device is recognised as /dev/sdc but without any partitions, fdisk shows an empty partition table. Dmesg gives me this.

Code:

[ 3708.392074] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 3708.542179] usb 1-6: configuration #1 chosen from 2 choices
[ 3708.560674] scsi7 : SCSI emulation for USB Mass Storage devices
[ 3708.563168] usb-storage: device found at 7
[ 3708.563172] usb-storage: waiting for device to settle before scanning
[ 3713.561328] usb-storage: device scan complete
[ 3713.562572] scsi 7:0:0:0: Direct-Access     Sony     PRS-600          1.00 PQ: 0 ANSI: 2
[ 3713.564804] scsi 7:0:0:1: Direct-Access     Sony     PRS-600 MS       1.00 PQ: 0 ANSI: 2
[ 3713.566434] scsi 7:0:0:2: Direct-Access     Sony     PRS-600 SD       1.00 PQ: 0 ANSI: 2
[ 3713.568692] scsi 7:0:0:3: Direct-Access     Sony     PRS-600 Launcher 1.00 PQ: 0 ANSI: 2
[ 3713.575834] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 3713.578065] sd 7:0:0:1: Attached scsi generic sg4 type 0
[ 3713.582347] sd 7:0:0:2: Attached scsi generic sg5 type 0
[ 3713.583022] sd 7:0:0:3: Attached scsi generic sg6 type 0
[ 3713.600649] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 3713.609009] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[ 3713.611908] sd 7:0:0:2: [sde] Attached SCSI removable disk
[ 3713.620333] sd 7:0:0:3: [sdf] Attached SCSI removable disk
[ 3714.684529] sd 7:0:0:3: [sdf] 20480 512-byte logical blocks: (10.4 MB/10.0 MiB)
[ 3714.795088] sd 7:0:0:3: [sdf] Write Protect is on
[ 3714.795093] sd 7:0:0:3: [sdf] Mode Sense: 0f 00 80 00
[ 3714.795097] sd 7:0:0:3: [sdf] Assuming drive cache: write through
[ 3714.915084] sd 7:0:0:3: [sdf] Assuming drive cache: write through
[ 3714.915092]  sdf:
[ 3715.753776] sd 7:0:0:1: [sdd] 3928064 512-byte logical blocks: (2.01 GB/1.87 GiB)
[ 3715.865088] sd 7:0:0:1: [sdd] Assuming drive cache: write through
[ 3715.974962] sd 7:0:0:1: [sdd] Assuming drive cache: write through
[ 3715.974973]  sdd: sdd1
[ 3715.993194] sd 7:0:0:0: [sdc] 802560 512-byte logical blocks: (410 MB/391 MiB)
[ 3716.104972] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 3716.224978] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 3716.224989]  sdc:

can you maybe help me? if you need any more info, I'm happy to provide it.

Nvidiot · 03-25-2010, 05:08 PM

Could you try mounting /dev/sdc directly? Maybe it's not partitioned but just has the filesystem directly on the block device?

From a terminal, run:

Quote:

sudo mount /dev/sdc /path/to/some/empty/folder

marcchehab · 03-26-2010, 08:30 AM

I was just gonna write that in linux sdc is the whole harddrive but sdc1,2,3,4... the partitions. I never in my life saw u can mount the whole harddrive and access data.

but this time it works

hehe. weird. do u know how I can get it to automount?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calibre Mount Helper in Ubuntu 10.04	capidamonte	Calibre	13	09-04-2010 04:39 PM
PRS 700 does not mount on Ubuntu 8.10	ita	Sony Reader	5	06-23-2009 08:47 PM
Books on internal memory show as on Memory Stick	doreenjoy	Sony Reader	6	06-05-2009 02:08 AM
Internal Memory	jlbfoot	Sony Reader	3	12-16-2008 04:34 PM
Memory cards and internal memory	Valloric	Sony Reader	30	02-15-2008 05:46 AM

03-26-2010, 08:30 AM	#3
marcchehab Junior Member Posts: 2 Karma: 10 Join Date: Mar 2010 Device: PRS-600	I was just gonna write that in linux sdc is the whole harddrive but sdc1,2,3,4... the partitions. I never in my life saw u can mount the whole harddrive and access data. but this time it works hehe. weird. do u know how I can get it to automount?

Advert