Opus Reviving an old Opus

pst · 07-22-2020, 06:54 AM

I tried to revive my old Opus for my son, sadly enough it does not work reliably. Initially, it didn't even boot up fully, meanwhile it sometimes does, but then it gets stuck during reading. What works reliably is connecting it to the Mac, restarting it and then it mounts properly as a drive. So I wanted to re-install the latest firmware, but it's not available anymore. I have also found some hints that there is a way to factory reset it with the help of Bookeen, but the simply refuse to give any support anymore. So does anybody have

* The latest firmware or maybe even several versions?
* Instructions for the secret full reset?

I find it a bit odd that Bookeen doesn't even provide old files and instructions anymore. It's just some files on the web server. And my ticket was closed as "resolved" after over a week, which it clearly is not...

pdurrant · 07-23-2020, 05:27 AM

The latest firmwares were (I beleive) 1.6 (for MOBI) and 2.1 (ePub) released in June 2010.

I have copies I downloaded at the time. Send me a PM with your email address.

Your Opus might also benefit from a new battery. I suspect compatible ones are still available.

pdurrant · 07-23-2020, 06:16 AM

I've just noticed that I answered a similar question just a couple of months ago.

See this thread for links to the 1.6 and 2.1 firmware on the Bookeen web site.

(The Gen 3 and Opus used the same firmware files.)

pst · 07-23-2020, 07:56 AM

Ah and these links still work! Oh Bookeen, it could be so easy to help your customers and leave a good impression...

pst · 07-31-2020, 09:32 AM

I've made some progress and was able to install the latest firmware. But the Opus was still crashing. So I was brave and reformatted the Opus drive. Now the crashes are gone, but it can't see the internal drive anymore, only the sd card. Any hints on how to format the internal drive so it gets accepted by the Opus again are highly appreciated.

Other than that, I forgot how slow this was and how bad its use of the available display space was.

pdurrant · 07-31-2020, 10:07 AM

I suspect that it may have had the wrong kind of (i.e. newer) formatting applied than the Opus understands. Try formatting it again as FAT32.

pst · 08-01-2020, 05:49 PM

It was looking good, but I did it on MacOS. That one was never good in formatting FAT32 drives. So I hocked it up to the NAS today and re-formatted by the instructions given here:

https://www.mobileread.com/forums/sh...d.php?t=190194

Now it sees the internal drive again. It's still bit icky, but it's usable again. Thanks for the help!

07-22-2020, 06:54 AM	#1
pst Member Posts: 11 Karma: 10 Join Date: Jun 2018 Device: Kobo Aura One	Reviving an old Opus I tried to revive my old Opus for my son, sadly enough it does not work reliably. Initially, it didn't even boot up fully, meanwhile it sometimes does, but then it gets stuck during reading. What works reliably is connecting it to the Mac, restarting it and then it mounts properly as a drive. So I wanted to re-install the latest firmware, but it's not available anymore. I have also found some hints that there is a way to factory reset it with the help of Bookeen, but the simply refuse to give any support anymore. So does anybody have * The latest firmware or maybe even several versions? * Instructions for the secret full reset? I find it a bit odd that Bookeen doesn't even provide old files and instructions anymore. It's just some files on the web server. And my ticket was closed as "resolved" after over a week, which it clearly is not...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kindle Touch won´t jailbreak, keeps reviving deleted data	cbweb	Kindle Developer's Corner	16	01-11-2013 06:35 AM
Reviving a dead Kobo Touch?	ficbot	Kobo Reader	4	12-01-2011 09:53 PM
NYT: Ebooks and Fiction are Reviving the Book Biz	Kali Yuga	News	6	08-10-2011 11:29 AM
Opus just got the opus	Saud	Bookeen	10	08-02-2009 04:22 AM

07-23-2020, 05:27 AM	#2
pdurrant The Grand Mouse 高貴的老鼠 Posts: 73,439 Karma: 314930086 Join Date: Jul 2007 Location: Norfolk, England Device: Kindle Oasis	The latest firmwares were (I beleive) 1.6 (for MOBI) and 2.1 (ePub) released in June 2010. I have copies I downloaded at the time. Send me a PM with your email address. Your Opus might also benefit from a new battery. I suspect compatible ones are still available.

07-23-2020, 06:16 AM	#3
pdurrant The Grand Mouse 高貴的老鼠 Posts: 73,439 Karma: 314930086 Join Date: Jul 2007 Location: Norfolk, England Device: Kindle Oasis	I've just noticed that I answered a similar question just a couple of months ago. See this thread for links to the 1.6 and 2.1 firmware on the Bookeen web site. (The Gen 3 and Opus used the same firmware files.)

07-23-2020, 07:56 AM	#4
pst Member Posts: 11 Karma: 10 Join Date: Jun 2018 Device: Kobo Aura One	Ah and these links still work! Oh Bookeen, it could be so easy to help your customers and leave a good impression...

07-31-2020, 09:32 AM	#5
pst Member Posts: 11 Karma: 10 Join Date: Jun 2018 Device: Kobo Aura One	I've made some progress and was able to install the latest firmware. But the Opus was still crashing. So I was brave and reformatted the Opus drive. Now the crashes are gone, but it can't see the internal drive anymore, only the sd card. Any hints on how to format the internal drive so it gets accepted by the Opus again are highly appreciated. Other than that, I forgot how slow this was and how bad its use of the available display space was.

07-31-2020, 10:07 AM	#6
pdurrant The Grand Mouse 高貴的老鼠 Posts: 73,439 Karma: 314930086 Join Date: Jul 2007 Location: Norfolk, England Device: Kindle Oasis	I suspect that it may have had the wrong kind of (i.e. newer) formatting applied than the Opus understands. Try formatting it again as FAT32.

08-01-2020, 05:49 PM	#7
pst Member Posts: 11 Karma: 10 Join Date: Jun 2018 Device: Kobo Aura One	It was looking good, but I did it on MacOS. That one was never good in formatting FAT32 drives. So I hocked it up to the NAS today and re-formatted by the instructions given here: https://www.mobileread.com/forums/sh...d.php?t=190194 Now it sees the internal drive again. It's still bit icky, but it's usable again. Thanks for the help!