Can't read ebooks.com books uploaded to Kobo Aura via Calibre?

AriochX · 10-17-2014, 04:33 AM

Hi everyone,

Sorry if this is in the wrong place; I wasn't sure where to put it.

I recently bought a couple of books from ebooks.com, extracted them with Digital Editions and added them to my Kobo Aura via Calibre. However, when I tried to read my books on the device I found that I couldn't - the books on the e-reader were blank, with no cover image or text. When I tried adding them to my e-reader directly via Digital Editions this problem did not occur, so I could just do that if necessary, but I would really rather do everything via Calibre.

Is there a likely explanation for this problem? My device is authorised with ADE and I've downloaded books from ebooks.com and added them via Calibre before with no problems. I updated Calibre today so I don't think that's it. I tried removing and re-adding my older books from ebooks.com and they still work fine, as do my open-source books and books from other sources. Ebooks.com seem to have changed their interface slightly in the past week or so - the newer books have a "Read Online" with Amigo Reader option - so perhaps that could have something to do with it? I'd be grateful for any suggestions.

Thanks!

davidfor · 10-17-2014, 06:02 AM

As the books are being downloaded via ADE, that means they have DRM. Are you doing anything to remove the DRM before sending them to the device using calibre? I think that even if you have the device authorised with ADE, you still need to send DRM protected books to the device using ADE. I'm not sure as I strip the DRM so that I don't have to worry about it. A visit to our good friend Apprentice Alf, might be in order. If you already have done that, you might want to check the plugin is still installed and enabled.

AriochX · 10-17-2014, 06:53 AM

Hi!

I'm not stripping DRM at the moment (though I am considering it), but I have previously added DRM'd books to my e-reader via Calibre without these problems. The Calibre FAQ says that as long as your device is authorised and you extract the ASCM file with ADE it should work, and it did previously - I'm not sure why it isn't now.

The book transfers and opens on the e-reader okay (which it didn't when I tried to transfer them without authorising my device) but everything is blank.

AriochX · 10-21-2014, 01:01 PM

Okay, this is pretty strange.

I bought a book from Kobo.com (which also uses Adobe DRM), authorised it and sent it to my reader via Calibre, and it works fine. I then bought another book from ebooks.com and did the same thing, and that works fine too. It's just books from that one order that don't work. So it's not the Adobe DRM per se that's the problem.

I've emailed ebooks.com customer support about it. I really don't understand what the problem is.

10-17-2014, 04:33 AM	#1
AriochX Junior Member Posts: 3 Karma: 10 Join Date: Oct 2014 Device: Kobo Aura	Can't read ebooks.com books uploaded to Kobo Aura via Calibre? Hi everyone, Sorry if this is in the wrong place; I wasn't sure where to put it. I recently bought a couple of books from ebooks.com, extracted them with Digital Editions and added them to my Kobo Aura via Calibre. However, when I tried to read my books on the device I found that I couldn't - the books on the e-reader were blank, with no cover image or text. When I tried adding them to my e-reader directly via Digital Editions this problem did not occur, so I could just do that if necessary, but I would really rather do everything via Calibre. Is there a likely explanation for this problem? My device is authorised with ADE and I've downloaded books from ebooks.com and added them via Calibre before with no problems. I updated Calibre today so I don't think that's it. I tried removing and re-adding my older books from ebooks.com and they still work fine, as do my open-source books and books from other sources. Ebooks.com seem to have changed their interface slightly in the past week or so - the newer books have a "Read Online" with Amigo Reader option - so perhaps that could have something to do with it? I'd be grateful for any suggestions. Thanks!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Read book blurbs on Kobo Aura?	Lancaster	Devices	3	08-20-2014 10:28 PM
Aura Newbie - Can I read Kindle books on Aura	canuck100	Kobo Reader	5	10-28-2013 08:13 AM
Kindle Touch freezes when books uploaded from Calibre	mishka1999	Devices	2	03-02-2012 12:36 AM
Kobo library list doesn't show all uploaded books	lowendr	Kobo Reader	1	01-16-2012 05:30 PM
Can sony ebook library read material uploaded by Calibre	jans	Calibre	5	11-06-2009 05:55 AM

10-17-2014, 06:02 AM	#2
davidfor Grand Sorcerer Posts: 24,905 Karma: 47303824 Join Date: Jul 2011 Location: Sydney, Australia Device: Kobo:Touch,Glo, AuraH2O, GloHD,AuraONE, ClaraHD, Libra H2O; tolinoepos	As the books are being downloaded via ADE, that means they have DRM. Are you doing anything to remove the DRM before sending them to the device using calibre? I think that even if you have the device authorised with ADE, you still need to send DRM protected books to the device using ADE. I'm not sure as I strip the DRM so that I don't have to worry about it. A visit to our good friend Apprentice Alf, might be in order. If you already have done that, you might want to check the plugin is still installed and enabled.

10-17-2014, 06:53 AM	#3
AriochX Junior Member Posts: 3 Karma: 10 Join Date: Oct 2014 Device: Kobo Aura	Hi! I'm not stripping DRM at the moment (though I am considering it), but I have previously added DRM'd books to my e-reader via Calibre without these problems. The Calibre FAQ says that as long as your device is authorised and you extract the ASCM file with ADE it should work, and it did previously - I'm not sure why it isn't now. The book transfers and opens on the e-reader okay (which it didn't when I tried to transfer them without authorising my device) but everything is blank.

10-21-2014, 01:01 PM	#4
AriochX Junior Member Posts: 3 Karma: 10 Join Date: Oct 2014 Device: Kobo Aura	Okay, this is pretty strange. I bought a book from Kobo.com (which also uses Adobe DRM), authorised it and sent it to my reader via Calibre, and it works fine. I then bought another book from ebooks.com and did the same thing, and that works fine too. It's just books from that one order that don't work. So it's not the Adobe DRM per se that's the problem. I've emailed ebooks.com customer support about it. I really don't understand what the problem is.

Advert