09-27-2016, 10:13 PM | #1 |
Junior Member
Posts: 4
Karma: 10
Join Date: Sep 2016
Device: none
|
Calibre GUI Not Starting (Linux)
I can't get Calibre to start. I downgraded to 2.65 and it loads fine, but no version above that will load. Here's the debug output:
Code:
calibre 2.68 embedded-python: False is64bit: True Linux-4.7.4-1-ARCH-x86_64-with-glibc2.2.5 Linux ('64bit', '') ('Linux', '4.7.4-1-ARCH', '#1 SMP PREEMPT Thu Sep 15 15:24:29 CEST 2016') Python 2.7.12 Linux: ('', '', '') Successfully initialized third party plugins: Read MP3 AudioBook metadata (1, 0, 79) qt5ct: using qt5ct plugin devicePixelRatio: 1.0 logicalDpi: inf x inf physicalDpi: -47431377.9645 x -83917053.3218 Starting up... QWidget::setMaximumSize: (/JobError) Negative sizes (16777215,-492131600) are not possible DBusExport: Failed to connect to DBUS session bus, with error: org.freedesktop.DBus.Error.NotSupported: Using X11 for dbus-daemon autolaunch was disabled at compile time, set your DBUS_SESSION_BUS_ADDRESS instead qt5ct: D-Bus system tray: no Started up in 1.26 seconds with 70 books QXcbConnection: XCB error: 2 (BadValue), sequence: 417, resource id: 0, major code: 1 (CreateWindow), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 418, resource id: 23068677, major code: 2 (ChangeWindowAttributes), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 419, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 420, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 421, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 423, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 424, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 425, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 428, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 432, resource id: 23068677, major code: 2 (ChangeWindowAttributes), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 433, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 436, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 437, resource id: 23068677, major code: 20 (GetProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 441, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 442, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 445, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 446, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 449, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 450, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 467, resource id: 23068677, major code: 2 (ChangeWindowAttributes), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 468, resource id: 23068677, major code: 2 (ChangeWindowAttributes), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 469, resource id: 23068677, major code: 20 (GetProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 470, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 471, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 472, resource id: 23068677, major code: 20 (GetProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 473, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 474, resource id: 23068677, major code: 20 (GetProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 475, resource id: 23068677, major code: 19 (DeleteProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 476, resource id: 23068677, major code: 8 (MapWindow), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 478, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 479, resource id: 23068677, major code: 12 (ConfigureWindow), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 480, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 484, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 485, resource id: 23068677, major code: 18 (ChangeProperty), minor code: 0 |
09-27-2016, 11:22 PM | #2 |
creator of calibre
Posts: 43,866
Karma: 22666666
Join Date: Oct 2006
Location: Mumbai, India
Device: Various
|
You are presumably using some kind of broken vnc server. Use a decent one, like x11vnc or tigervnc and you will be fine.
|
Advert | |
|
09-28-2016, 08:13 AM | #3 |
Junior Member
Posts: 4
Karma: 10
Join Date: Sep 2016
Device: none
|
I'm not using VNC, I'm directly on X with Openbox.
|
09-28-2016, 08:29 AM | #4 |
creator of calibre
Posts: 43,866
Karma: 22666666
Join Date: Oct 2006
Location: Mumbai, India
Device: Various
|
Those are all errors talking to the X server. If it is not a broken vnc, then something is wrong with either your graphics drivers or X server installation.
|
09-28-2016, 10:39 PM | #5 |
Junior Member
Posts: 4
Karma: 10
Join Date: Sep 2016
Device: none
|
I did a reinstall, and it's still not loading. The error is a little different, but probably the same problem. I'm going to submit a bug report on Archlinux, since it may be a missing dependency or something.
Code:
calibre 2.68 embedded-python: False is64bit: True Linux-4.7.5-1-ARCH-x86_64-with-glibc2.2.5 Linux ('64bit', '') ('Linux', '4.7.5-1-ARCH', '#1 SMP PREEMPT Sat Sep 24 13:04:22 CEST 2016') Python 2.7.12 Linux: ('', '', '') devicePixelRatio: 1.0 logicalDpi: inf x inf physicalDpi: -151097187.422 x -268699924.43 QWidget::setMinimumSize: (/Wizard) Negative sizes (-402653024,0) are not possible QWidget::setMinimumSize: (/Wizard) Negative sizes (0,-626349394) are not possible QWidget::setMaximumSize: (/Wizard) Negative sizes (-402128897,16777215) are not possible QWidget::setMaximumSize: (/Wizard) Negative sizes (0,-609572179) are not possible QWidget::setMinimumSize: (/QWidget) Negative sizes (-492131479,55) are not possible QXcbConnection: XCB error: 2 (BadValue), sequence: 403, resource id: 0, major code: 1 (CreateWindow), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 404, resource id: 12582917, major code: 2 (ChangeWindowAttributes), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 405, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 406, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 407, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 409, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 410, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 411, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 414, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 418, resource id: 12582917, major code: 2 (ChangeWindowAttributes), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 419, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 QXcbConnection: XCB error: 3 (BadWindow), sequence: 422, resource id: 12582917, major code: 18 (ChangeProperty), minor code: 0 |
Advert | |
|
09-28-2016, 10:58 PM | #6 |
Junior Member
Posts: 4
Karma: 10
Join Date: Sep 2016
Device: none
|
I found http://calibre-ebook.com/download_linux and tried it and it worked, so it must be something Archlinux specific.
|
10-25-2016, 05:54 PM | #7 |
Junior Member
Posts: 2
Karma: 10
Join Date: Oct 2016
Device: Kobo Glo HD
|
I've gotten the same errors recently trying to run Calibre remotely (start an X server on one box, ssh into another box with X forwarding enabled, and run Calibre on the remote box). This suggests a possible Qt bug:
https://bugreports.qt.io/browse/QTCREATORBUG-14427 If I invoke Calibre with the following: Code:
QT_DEVICE_PIXEL_RATIO=1 nohup calibre & (The remote system is Gentoo Linux. The local system is Windows 7 SP1 with Cygwin.) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calibre on Linux not starting | BoundforPNG | Calibre | 12 | 09-16-2017 11:22 PM |
Ubuntu/Linux : Command to schedule a job with Calibre.( No GUI ) | DurgaPrasad | Calibre | 0 | 10-16-2013 06:50 AM |
Calibre GUI linux question | ziprar | Calibre | 0 | 03-19-2012 05:40 AM |
starting calibre to do only jobs (no gui) | sosimple | Calibre | 7 | 05-27-2011 02:56 AM |
Calibre 0.6.27 starting problem (linux) | ferossan | Calibre | 4 | 12-11-2009 09:46 PM |