Build your own nebuchadnezzar

cactusjack · 05-26-2003, 02:12 AM

For all those matrix fans out there try this,
Go to http://www.thematrix.com and enter the high-bandwidth version. in the upper right hand corner there is a MAINFRAME area.....click the yellow dot to the right. a side panel will open up. in the upper right hand corner of the side panel there is a small grey square box. click it. it will turn green. move your mouse over it again and it will turn green. click it. the words "BINARY ACCESS" will flash on the screen and you'll get a new panel. slide it open and enter 01101111 into it. the light will turn green. press enter. now you will have to convert 0xA3B1A428 into binary and enter it into the panel at the top. once correctly converted, you will hear a happy little sound and you may press enter once again.

The binary conversion of the hex.
1010-0011-1011-0001-1010-0100-0010-1000

it gives you access to the nebuchadnezzar model builder. Have fun
_________________

jwy · 05-26-2003, 08:19 PM

wicked

cactusjack · 05-26-2003, 08:46 PM

Ive been playing with this and its loads of fun

jwy · 05-26-2003, 09:32 PM

heh
so how'd u find this out?

cactusjack · 06-01-2003, 02:52 AM

To be quite honest I didnt. I have a friend who has way too much time on his hands. I must ask him how he worked it out.

crh3f · 06-01-2003, 09:27 PM

That's really cool! Glad you put the conversion in...I never would have been able to do it.

chunlin66 · 07-02-2003, 09:04 PM

Your friend must be crazy

05-26-2003, 02:12 AM	#1
cactusjack Member Posts: 18 Karma: 19436 Join Date: Mar 2003 Device: TT	Build your own nebuchadnezzar For all those matrix fans out there try this, Go to http://www.thematrix.com and enter the high-bandwidth version. in the upper right hand corner there is a MAINFRAME area.....click the yellow dot to the right. a side panel will open up. in the upper right hand corner of the side panel there is a small grey square box. click it. it will turn green. move your mouse over it again and it will turn green. click it. the words "BINARY ACCESS" will flash on the screen and you'll get a new panel. slide it open and enter 01101111 into it. the light will turn green. press enter. now you will have to convert 0xA3B1A428 into binary and enter it into the panel at the top. once correctly converted, you will hear a happy little sound and you may press enter once again. The binary conversion of the hex. 1010-0011-1011-0001-1010-0100-0010-1000 it gives you access to the nebuchadnezzar model builder. Have fun _________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Commandline only build	plord	Calibre	11	11-27-2010 06:56 PM
Mac Build	pdurrant	Sigil	1	08-10-2009 11:31 AM
0.6.0b1 build help	WayneD	Calibre	5	06-01-2009 08:00 PM
Build Problem	ali_sade	OpenInkpot	1	04-15-2009 04:46 AM
Does someone still have Mobigen 6.01 build 37?	IceHand	Kindle Formats	7	03-03-2008 05:04 PM

05-26-2003, 08:19 PM	#2
jwy Member Posts: 21 Karma: 42 Join Date: May 2003 Device: NX70v	wicked

05-26-2003, 08:46 PM	#3
cactusjack Member Posts: 18 Karma: 19436 Join Date: Mar 2003 Device: TT	Ive been playing with this and its loads of fun

05-26-2003, 09:32 PM	#4
jwy Member Posts: 21 Karma: 42 Join Date: May 2003 Device: NX70v	heh so how'd u find this out?

06-01-2003, 02:52 AM	#5
cactusjack Member Posts: 18 Karma: 19436 Join Date: Mar 2003 Device: TT	To be quite honest I didnt. I have a friend who has way too much time on his hands. I must ask him how he worked it out.

06-01-2003, 09:27 PM	#6
crh3f Member Posts: 21 Karma: 40 Join Date: Jun 2003 Device: Sony Clie NR70V	That's really cool! Glad you put the conversion in...I never would have been able to do it.

07-02-2003, 09:04 PM	#7
chunlin66 Enthusiast Posts: 30 Karma: 2358 Join Date: Dec 2002 Location: United States Device: Clie NX60	Your friend must be crazy