09-19-2021, 02:07 AM | #1 |
Junior Member
Posts: 8
Karma: 10
Join Date: Jul 2021
Device: PW4
|
How to boot Kindle PW 4 into diags?
Question in title
|
09-19-2021, 08:55 PM | #2 |
Wizard
Posts: 1,059
Karma: 3000026
Join Date: Feb 2012
Location: Cape Canaveral
Device: Kindle Scribe
|
Easiest way I think is to install Rescue Pack from NiLuje Snapshots thread, then put a blank file ENABLE_DIAGS in the visible storage and restart.
Another option is to also install Coward's Rescue Pack and restart the PW4 while it is plugged in. |
09-20-2021, 06:46 AM | #3 |
Guru
Posts: 885
Karma: 10113994
Join Date: Feb 2010
Location: Serbia
Device: Kindle PW5 [bricked], Kindle PW1
|
IIRC Rescue Pack is not compatible with PW4...
|
09-20-2021, 07:42 AM | #4 |
Junior Member
Posts: 8
Karma: 10
Join Date: Jul 2021
Device: PW4
|
|
09-28-2021, 02:46 AM | #5 |
Enhtusiast
Posts: 51
Karma: 2332557
Join Date: Dec 2018
Device: K3 DxG PW1 KV PW4
|
PW4 does not have diags mode anymore - your only chance (if you have FW older than 5.13.4) is to install diagnostic FW (note: this will erase normal OS, so you'll need to flash it back to operate normally).
Anyway the only way (that I know) is to follow this thread: https://www.mobileread.com/forums/sh...d.php?t=335590 |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
kt3 basic, poor brick without diags, u-boot only, how to send backup files? | 3ldn1k | Kindle Developer's Corner | 19 | 08-12-2023 11:09 AM |
Kindle PaperWhite 1 stuck in Celeste System Diags boot mode | chobile | Kindle Developer's Corner | 11 | 02-14-2021 03:47 PM |
K4NT won't boot and can't use diags mode. | Kafkarudo | Kindle Developer's Corner | 26 | 05-10-2015 01:57 AM |
Bricked Kindle Touch; Won't boot into diags/fastboot | kerotan | Kindle Developer's Corner | 3 | 05-19-2012 10:58 AM |
HELP kindle 4 diags | hawk72 | Kindle Developer's Corner | 3 | 05-03-2012 09:42 AM |